【文件属性】：
文件名称：Tesseract-OCR.rar
文件大小：17.32MB
文件格式：RAR
更新时间：2023-05-25 06:25:01
tesseract-ocr
Note that this is a text-only and possibly out-of-date version of the
wiki ReadMe, which is located at:
http://code.google.com/p/tesseract-ocr/wiki/ReadMe
Introduction
============
This package contains the Tesseract Open Source OCR Engine.
Originally developed at Hewlett Packard Laboratories Bristol and
at Hewlett Packard Co, Greeley Colorado, all the code
in this distribution is now licensed under the Apache License:
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
** http://www.apache.org/licenses/LICENSE-2.0
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
Dependencies and Licenses
=========================
Leptonica is required. (www.leptonica.com). Tesseract no longer compiles
without Leptonica.
Libtiff is no longer required as a direct dependency.
Installing and Running Tesseract
--------------------------------
All Users Do NOT Ignore!
The tarballs are split into pieces.
tesseract-x.xx.tar.gz contains all the source code.
tesseract-x.xx..tar.gz contains the language data files for .
You need at least one of these or Tesseract will not work.
Note that tesseract-x.xx.tar.gz unpacks to the tesseract-ocr directory.
tesseract-x.xx..tar.gz unpacks to the tessdata directory which
belongs inside your tesseract-ocr directory. It is therefore best to
download them into your tesseract-x.xx directory, so you can use unpack
here or equivalent. You can unpack as many of the language packs as you
care to, as they all contain different files. Note that if you are using
make install you should unpack your language data to your source tree
before you run make install. If you unpack them as root to the
destination directory of make install, then the user ids and access
permissions might be messed up.
boxtiff-2.xx..tar.gz contains data that was used in training for
those that want to do their own training. Most users should NOT download
these files.
Instructions for using the training tools are documented separately at
Tesseract wiki http://code.google.com/p/tesseract-ocr/w/list
Windows
-------
Please use installer (for 3.00 and above). Tesseract is library with
command line interface. If you need GUI, please check AddOns wiki page
http://code.google.com/p/tesseract-ocr/wiki/AddOns#GUI
If you are building from the sources, the recommended build platform is
VC++ Express 2008 (optionally 2010).
The executables are built with static linking, so they stand more chance
of working out of the box on more windows systems.
The executable must reside in the same directory as the tessdata
directory or you need to set up environment variable TESSDATA_PREFIX.
Installer will set it up for you.
The command line is:
tesseract imagename outputbase [-l lang] [-psm pagesegmode] [configfiles...]
If you need interface to other applications, please check wrapper section
on AddOns wiki page:
http://code.google.com/p/tesseract-ocr/wiki/AddOns#Tesseract_3.0x
Non-Windows (or Cygwin)
-----------------------
You have to tell Tesseract through a standard unix mechanism where to
find its data directory. You must either:
./autogen.sh
./configure
make
make install
sudo ldconfig
to move the data files to the standard place, or:
export TESSDATA_PREFIX="directory in which your tessdata resides/"
In either case the command line is:
tesseract imagename outputbase [-l lang] [-psm pagesegmode] [configfiles...]
New there is a tesseract.spec for making rpms. (Thanks to Andrew Ziem for
the help.) It might work with your OS if you know how to do that.
If you are linking to the libraries, as Ocropus does, please link to
libtesseract_api.
History
=======
The engine was developed at Hewlett Packard Laboratories Bristol and
at Hewlett Packard Co, Greeley Colorado between 1985 and 1994, with some
more changes made in 1996 to port to Windows, and some C++izing in 1998.
A lot of the code was written in C, and then some more was written in C++.
Since then all the code has been converted to at least compile with a C++
compiler. Currently it builds under Linux with gcc4.4.3 and under Windows
with VC++2008. The C++ code makes heavy use of a list system using macros.
This predates stl, was portable before stl, and is more efficient than stl
lists, but has the big negative that if you do get a segmentation violation,
it is hard to debug.
The most recent change is that Tesseract can now recognize 39 languages,
including Arabic, Hindi, Vietnamese, plus 3 Fraktur variants
is fully UTF8 capable, and is fully trainable. See TrainingTesseract for
more information on training.
Tesseract was included in UNLV's Fo
【文件预览】：
Tesseract-OCR
----tessdata()
--------eng.cube.word-freq(2.33MB)
--------eng.tesseract_cube.nn(996B)
--------tessconfigs()
--------eng.traineddata(20.86MB)
--------eng.cube.lm_(181B)
--------eng.cube.fold(38B)
--------osd.traineddata(10.07MB)
--------configs()
--------eng.cube.lm(181B)
--------eng.cube.params(254B)
--------eng.cube.size(12.42MB)
--------eng.cube.nn(837KB)
--------eng.cube.bigrams(168KB)
----shapeclustering.exe(857KB)
----mftraining.exe(930KB)
----dawg2wordlist.exe(579KB)
----tesseract.exe(2.24MB)
----tar.exe(344KB)
----ambiguous_words.exe(1.04MB)
----combine_tessdata.exe(567KB)
----classifier_tester.exe(1.25MB)
----unicharset_extractor.exe(572KB)
----doc()
--------eurotext.tif(100KB)
--------phototest.tif(38KB)
--------README(6KB)
--------AUTHORS(158B)
--------COPYING(1007B)
--------ReleaseNotes(13KB)
----java()
--------ScrollView.jar(25KB)
----gzip.exe(90KB)
----Uninstall.exe(93KB)
----wordlist2dawg.exe(661KB)
----cntraining.exe(602KB)
