文件名称：使用命名访问列表-CCNA中文版PPT
文件大小：10.75MB
文件格式：PPT
更新时间：2024-05-15 11:39:43
CCNA
使用命名访问列表 适用于IOS版本号为11.2以后 所使用的命名必须一致 允许和拒绝语句不需要访问列表编号 “no” 命令删除访问列表 在端口上应用访问列表 Router(config)# ip access-list { standard | extended } name Router(config {std- | ext-}nacl)# { permit | deny } { ip access list test conditions } { permit | deny } { ip access list test conditions } no { permit | deny } { ip access list test conditions } Router(config-if)# ip access-group name { in | out } * Slide 3 of 3 Purpose: Layer 3—Finishes with the new form of the access group command, now able to refer to an IP access list name as well as an access list number. Emphasize: Introduced with Cisco IOS Release 11.2, named access lists: Intuitively identify IP access lists using alphanumeric identifiers. Remove the limit on the number of access lists (previously 99 for IP standard and 100 for IP extended access lists). Allow per-access-list-statement deletions (previously the entire numbered access list needed to be deleted as a single entity). Require Cisco IOS Release 11.2 or later.