文件名称：plc_deadtime_fifo:停滞时间信号，请参阅。 https
文件大小：356KB
文件格式：ZIP
更新时间：2024-04-20 22:30:13
停滞时间信号，请参阅。 Summary 1) Detect a rising edge on a discrete input 2) Twenty seconds after that detection, make an output go high for one second. Caveats - The twenty-second delay will be an HMI setpoint; here it is controlled by two inputs, decreasing or increasing 5s at a time - (In-;)Accuracy - Probably +/- one, or a few, scan times - Plus any non-deterministic effects of using a TON timer
【文件预览】：
plc_deadtime_fifo-master
----deadtime_fifo.zip(355KB)
----README.md(3KB)