文件名称：STR7STR9 audio generation with PWM.pdf
文件大小：158KB
文件格式：PDF
更新时间：2023-06-17 08:40:23
PWM Audio
Introduction The purpose of this application note is to provide a hardware and firmware solution to STR7 and STR9 microcontroller users for audio playback of a .WAV file. The approach is optimized in that it uses a minimal number of components external to the microcontroller, and offers a high degree of flexibility to the end-user for use with their own .WAV files. There are two .WAV file parameters that can be controlled by the user; the sample rate and the file size which depends on the application requirements. The actual content of the .WAV file is irrelevant and may consist of speech, music, etc., and the only limitation is the audio format. In fact, this application assumes that the .WAV file format must be: PCM (no compression), 8000/11025/22050/44100 Hz sample rate, 8-bit and mono. This document is structured as follows: a brief description of the .WAV file format in Section 1. Section 2 provides a detailed description of the basics of audio playback. Finally, Section 3 presents in detail an example of an application built around an STR711F microcontroller and that can be easily tailored to any other STR7/STR9 microcontroller