设备配置方法-nbu培训资料

时间:2024-05-12 07:16:43
【文件属性】:

文件名称:设备配置方法-nbu培训资料

文件大小:4.34MB

文件格式:PPT

更新时间:2024-05-12 07:16:43

NBU

设备配置方法 Performs an autodiscovery of devices on a named set of servers (推荐方法) 设备配置向导 用介质和设备管理控制界面 NetBackup 管理控制界面 用 不带参数的tpconfig 命令 (UNIX only) 设备管理配置工具 用带参数的 tpconfig 命令 (不推荐) 命令行界面 There are three interfaces available for configuring devices. >>> You can use the config storage device wizard, which will perform an auto-discovery of the device on a named set of servers. >>> You can use the media device management interface within the NetBackup admin console, which is the one that we will be concentrating on in this class. >>> Or you can use the command line, tpconfig command. The tpconfig command is either a command line interface or a text menu interface. The advantage of the command line interface is that you can script the configuration. You can find the tpconfig command in two places. It is under /usr/openv/volmgr/database in the directory path. It is also found under /usr/openv/volmgr/bin, as well. To get syntax for the tpconfig command, issue tpconfig dash-dash, or look at the man page. In your handout there are some examples of the tpconfig command to add a robot, add a drive etc. These are not a complete examples, but samples. Also notice that the tpconfig dash d command will display information about the robot and drive configuration.


网友评论