Building roads
Time Limit: 10000/1000 MS (Java/Others) Memory Limit: 32768/32768 K (Java/Others)
Total Submission(s): 1569 Accepted Submission(s): 490
Problem Description
Clever John just had another good idea. He first builds two transferring point S1 and S2, and then builds a road connecting S1 and S2 and N roads connecting each barn with S1 or S2, namely every barn will connect with S1 or S2, but not both. So that every pair of barns will be connected by the roads. To make the cows don't spend too much time while dropping around, John wants to minimize the maximum of distances between every pair of barns.
That's not the whole story because there is another troublesome problem. The cows of some barns hate each other, and John can't connect their barns to the same transferring point. The cows of some barns are friends with each other, and John must connect their barns to the same transferring point. What a headache! Now John turns to you for help. Your task is to find a feasible optimal road-building scheme to make the maximum of distances between every pair of barns as short as possible, which means that you must decide which transferring point each barn should connect to.
We have known the coordinates of S1, S2 and the N barns, the pairs of barns in which the cows hate each other, and the pairs of barns in which the cows are friends with each other.
Note that John always builds roads vertically and horizontally, so the length of road between two places is their Manhattan distance. For example, saying two points with coordinates (x1, y1) and (x2, y2), the Manhattan distance between them is |x1 - x2| + |y1 - y2|.
Input
Next line contains 4 integer sx1, sy1, sx2, sy2, which are the coordinates of two different transferring point S1 and S2 respectively.
Each of the following N line contains two integer x and y. They are coordinates of the barns from the first barn to the last one.
Each of the following A lines contains two different integers i and j(1 <= i < j <= N), which represent the i-th and j-th barns in which the cows hate each other.
The same pair of barns never appears more than once.
Each of the following B lines contains two different integers i and j(1 <= i < j <= N), which represent the i-th and j-th barns in which the cows are friends with each other. The same pair of barns never appears more than once.
You should note that all the coordinates are in the range [-1000000, 1000000].
Output
Sample Input
12750 28546 15361 32055
6706 3887
10754 8166
12668 19380
15788 16059
3 4
2 3
Sample Output
Source
思路：二分枚举最大值limit，然后重新构图，用2-SAT判定可行性。用Xi表示第i个牛棚连到S1,~Xi表示连到S2，检查每一个约束条件，构图：
1.hate关系的i,j Xi->~Xj ~Xi->Xj Xj->~Xi ~Xj->Xi
2.friend关系的i,j Xi->Xj ~Xi->~Xj Xj->Xi ~Xj->~Xi
接下来的也要检查，因为引入参数，就是多了约束条件了
这四种情况就是i,j到达对方的所有情况了
3.dist(i,S1)+dist(S1,j)>limit Xi->~Xj Xj->Xi
4.dist(i,S2)+dist(S2,j)>limit ~Xi->Xj ~Xj->Xi
5.dist(i,S1)+dist(S1,S2)+dist(S2,j)>limit Xi->Xj ~Xj->~Xi
5.dist(i,S2)+dist(S2,S1)+dist(S1,j)>limit ~Xi->~Xj Xj->Xi
然后求强连通分量判断Xi与~Xi是否在同一个连通分量中，是的话就有矛盾。
//2017-08-28
#include <cstdio>
#include <cstring>
#include <iostream>
#include <algorithm>
#include <vector>
#include <cmath> using namespace std; const int N = ;
const int M = N*N*;
int head[N], rhead[N], tot, rtot;
struct Edge{
int to, next;
}edge[M], redge[M]; void init(){
tot = ;
rtot = ;
memset(head, -, sizeof(head));
memset(rhead, -, sizeof(rhead));
} void add_edge(int u, int v){
edge[tot].to = v;
edge[tot].next = head[u];
head[u] = tot++; redge[rtot].to = u;
redge[rtot].next = rhead[v];
rhead[v] = rtot++;
} vector<int> vs;//后序遍历顺序的顶点列表
bool vis[N];
int cmp[N];//所属强连通分量的拓扑序 //input: u 顶点
//output: vs 后序遍历顺序的顶点列表
void dfs(int u){
vis[u] = true;
for(int i = head[u]; i != -; i = edge[i].next){
int v = edge[i].to;
if(!vis[v])
dfs(v);
}
vs.push_back(u);
} //input: u 顶点编号; k 拓扑序号
//output: cmp[] 强连通分量拓扑序
void rdfs(int u, int k){
vis[u] = true;
cmp[u] = k;
for(int i = rhead[u]; i != -; i = redge[i].next){
int v = redge[i].to;
if(!vis[v])
rdfs(v, k);
}
} //Strongly Connected Component 强连通分量
//input: n 顶点个数
//output: k 强连通分量数;
int scc(int n){
memset(vis, , sizeof(vis));
vs.clear();
for(int u = ; u < n; u++)
if(!vis[u])
dfs(u);
int k = ;
memset(vis, , sizeof(vis));
for(int i = vs.size()-; i >= ; i--)
if(!vis[vs[i]])
rdfs(vs[i], k++);
return k;
} int n, A, B, dis_s1[N], dis_s2[N], dis_s1_s2;
struct Point{
int x, y;
}point[N], s1, s2, hate[N], friends[N]; //input: 两个点
//output: 两点间距离
double distance(Point a, Point b){
return abs(a.x-b.x) + abs(a.y-b.y);
} bool check(int limit){
init();
// i 表示 i 连 s1， NOT i 表示 i 连 s2
for(int i = ; i < n; i++){
bool fg = true;
if(distance(point[i], s1) > limit){
add_edge(i, i+n);
fg = false;
}
if(distance(point[i], s2) > limit){
if(!fg)return false;
add_edge(i+n, i);
}
for(int j = i+; j < n; j++){
if(dis_s1[i] + dis_s1[j] > limit){
add_edge(i, j+n);// i -> s1, j -> s2
add_edge(j, i+n);// j -> s1, i -> s2
}
if(dis_s2[i] + dis_s2[j] > limit){
add_edge(i+n, j);// i -> s2, j -> s1
add_edge(j+n, i);// j -> s2, i -> s1
}
if(dis_s1[i] + dis_s1_s2 + dis_s2[j] > limit){
add_edge(i, j);// i -> s1, j -> s1
add_edge(j+n, i+n);// j -> s2, i -> s2
}
if(dis_s2[i] + dis_s1_s2 + dis_s1[j] > limit){
add_edge(i+n, j+n);// i -> s2, j -> s2
add_edge(j, i);// j -> s1, i -> s1
}
}
}
for(int i = ; i < A; i++){
int u = hate[i].x, v = hate[i].y;
add_edge(u, v+n);
add_edge(v+n, u);
add_edge(v, u+n);
add_edge(u+n, v);
}
for(int i = ; i < B; i++){
int u = friends[i].x, v = friends[i].y;
add_edge(u, v);
add_edge(v, u);
add_edge(u+n, v+n);
add_edge(v+n, u+n);
}
scc(*n);
for(int i = ; i < n; i++){
if(cmp[i] == cmp[i+n])
return false;
}
return true;
} int main()
{
std::ios::sync_with_stdio(false);
//freopen("inputE.txt", "r", stdin);
while(cin>>n>>A>>B){
cin>>s1.x>>s1.y>>s2.x>>s2.y;
dis_s1_s2 = distance(s1, s2);
for(int i = ; i < n; i++){
cin>>point[i].x>>point[i].y;
dis_s1[i] = distance(point[i], s1);
dis_s2[i] = distance(point[i], s2);
}
for(int i = ; i < A; i++){
cin>>hate[i].x>>hate[i].y;
hate[i].x--;
hate[i].y--;
}
for(int i = ; i < B; i++){
cin>>friends[i].x>>friends[i].y;
friends[i].x--;
friends[i].y--;
}
//r 开小了HDU会TLE，ORZ。。。
int l = , r = , mid, ans = -;
while(l <= r){
mid = (l+r)/;
if(check(mid)){
ans = mid;
r = mid-;
}else l = mid+;
}
cout<<ans<<endl;
}
return ;
}