系统要求:Linux 2.6+ 内核,本文中的Linux操作系统为CentOS 5.3
一、获取相关开源程序:
1、【适用CentOS操作系统】利用CentOS Linux系统自带的yum命令安装、升级所需的程序库(RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包,进行安装):
- LANG=C
- yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers
2、【适用CentOS、RedHat及其它Linux操作系统】下载程序源码包:
①、从软件的官方网站下载:
- mkdir -p /data0/software
- cd /data0/software
- wget http://sysoev.ru/nginx/nginx-0.8.36.tar.gz
- wget http://www.php.net/get/php-5.2.13.tar.gz/from/this/mirror
- wget http://php-fpm.org/downloads/php-5.2.13-fpm-0.5.13.diff.gz
- wget http://dev.mysql.com/get/Downloads/MySQL-5.5/mysql-5.5.3-m3.tar.gz/from/http://mysql.he.net/
- wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.tar.gz
- wget “http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460big_mirror=0″
- wget “http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz?modtime=1194463373big_mirror=0″
- wget http://pecl.php.net/get/memcache-2.2.5.tgz
- wget “http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843big_mirror=0″
- wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.01.tar.gz
- wget http://bart.eaccelerator.net/source/0.9.6/eaccelerator-0.9.6.tar.bz2
- wget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgz
- wget http://blog.s135.com/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
- wget http://pecl.php.net/get/imagick-2.3.0.tgz
②、从blog.s135.com下载,建议在这里单线程下载!(比较稳定,在Linux/Unix下通过Wget、Curl等命令下载以下软件):
XML/HTML代码- mkdir -p /data0/software
- cd /data0/software
- wget http://blog.s135.com/soft/linux/nginx_php/nginx/nginx-0.8.36.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/php/php-5.2.13.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/phpfpm/php-5.2.13-fpm-0.5.13.diff.gz
- wget http://blog.s135.com/soft/linux/nginx_php/mysql/mysql-5.5.3-m3.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
- wget http://blog.s135.com/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/pcre/pcre-8.01.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.6.tar.bz2
- wget http://blog.s135.com/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz
- wget http://blog.s135.com/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
- wget http://blog.s135.com/soft/linux/nginx_php/imagick/imagick-2.3.0.tgz
二、安装PHP 5.2.10(FastCGI模式)
1、编译安装PHP 5.2.10所需的支持库:
- tar zxvf libiconv-1.13.tar.gz
- cd libiconv-1.13/
- ./configure –prefix=/usr/local
- make
- make install
- cd ../
- tar zxvf libmcrypt-2.5.8.tar.gz
- cd libmcrypt-2.5.8/
- ./configure
- make
- make install
- /sbin/ldconfig
- cd libltdl/
- ./configure –enable-ltdl-install
- make
- make install
- cd ../../
- tar zxvf mhash-0.9.9.9.tar.gz
- cd mhash-0.9.9.9/
- ./configure
- make
- make install
- cd ../
- ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
- ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
- ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
- ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
- ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
- ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
- ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
- ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
- ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
- tar zxvf mcrypt-2.6.8.tar.gz
- cd mcrypt-2.6.8/
- /sbin/ldconfig
- ./configure
- make
- make install
- cd ../
2、编译安装MySQL 5.5.3-m3
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.5.3-m3.tar.gz
cd mysql-5.5.3-m3/
./configure –prefix=/usr/local/webserver/mysql/ –enable-assembler –with-extra-charsets=complex –enable-thread-safe-client –with-big-tables –with-readline –with-ssl –with-embedded-server –enable-local-infile –with-plugins=partition,innobase,myisammrg
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cd ../
附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下几步。如果你只是希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。
①、创建MySQL数据库存放目录
mkdir -p /data0/mysql/3306/data/mkdir -p /data0/mysql/3306/binlog/
mkdir -p /data0/mysql/3306/relaylog/
chown -R mysql:mysql /data0/mysql/
②、以mysql用户帐号的身份建立数据表:
/usr/local/webserver/mysql/bin/mysql_install_db –basedir=/usr/local/webserver/mysql –datadir=/data0/mysql/3306/data –user=mysql③、创建my.cnf配置文件:
vi /data0/mysql/3306/my.cnf输入以下内容:
引用[client]
character-set-server = utf8
port = 3306
socket = /tmp/mysql.sock
[mysqld]
character-set-server = utf8
replicate-ignore-db = mysql
replicate-ignore-db = test
replicate-ignore-db = information_schema
user = mysql
port = 3306
socket = /tmp/mysql.sock
basedir = /usr/local/webserver/mysql
datadir = /data0/mysql/3306/data
log-error = /data0/mysql/3306/mysql_error.log
pid-file = /data0/mysql/3306/mysql.pid
open_files_limit = 10240
back_log = 600
max_connections = 5000
max_connect_errors = 6000
table_cache = 614
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 1M
join_buffer_size = 1M
thread_cache_size = 300
#thread_concurrency = 8
query_cache_size = 512M
query_cache_limit = 2M
query_cache_min_res_unit = 2k
default-storage-engine = MyISAM
thread_stack = 192K
transaction_isolation = READ-COMMITTED
tmp_table_size = 246M
max_heap_table_size = 246M
long_query_time = 3
log-slave-updates
log-bin = /data0/mysql/3306/binlog/binlog
binlog_cache_size = 4M
binlog_format = MIXED
max_binlog_cache_size = 8M
max_binlog_size = 1G
relay-log-index = /data0/mysql/3306/relaylog/relaylog
relay-log-info-file = /data0/mysql/3306/relaylog/relaylog
relay-log = /data0/mysql/3306/relaylog/relaylog
expire_logs_days = 30
key_buffer_size = 256M
read_buffer_size = 1M
read_rnd_buffer_size = 16M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_repair_threads = 1
myisam_recover
interactive_timeout = 120
wait_timeout = 120
skip-name-resolve
#master-connect-retry = 10
slave-skip-errors = 1032,1062,126,1114,1146,1048,1396
#master-host = 192.168.1.2
#master-user = username
#master-password = password
#master-port = 3306
server-id = 1
innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 512M
innodb_data_file_path = ibdata1:256M:autoextend
innodb_file_io_threads = 4
innodb_thread_concurrency = 8
innodb_flush_log_at_trx_commit = 2
innodb_log_buffer_size = 16M
innodb_log_file_size = 128M
innodb_log_files_in_group = 3
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
innodb_file_per_table = 0
#log-slow-queries = /data0/mysql/3306/slow.log
#long_query_time = 10
[mysqldump]
quick
max_allowed_packet = 32M
④、创建管理MySQL数据库的shell脚本:
vi /data0/mysql/3306/mysql输入以下内容(这里的用户名admin和密码12345678接下来的步骤会创建):
#!/bin/sh
mysql_port=3306
mysql_username=”admin”
mysql_password=”12345678″
function_start_mysql()
{
printf “Starting MySQL…\n”
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe –defaults-file=/data0/mysql/${mysql_port}/my.cnf 2>&1 > /dev/null &
}
function_stop_mysql()
{
printf “Stoping MySQL…\n”
/usr/local/webserver/mysql/bin/mysqladmin -u ${mysql_username} -p${mysql_password} -S /tmp/mysql.sock shutdown
}
function_restart_mysql()
{
printf “Restarting MySQL…\n”
function_stop_mysql
sleep 5
function_start_mysql
}
function_kill_mysql()
{
kill -9 $(ps -ef | grep ‘bin/mysqld_safe’ | grep ${mysql_port} | awk ‘{printf $2}’)
kill -9 $(ps -ef | grep ‘libexec/mysqld’ | grep ${mysql_port} | awk ‘{printf $2}’)
}
if [ "$1" = "start" ]; then
function_start_mysql
elif [ "$1" = "stop" ]; then
function_stop_mysql
elif [ "$1" = "restart" ]; then
function_restart_mysql
elif [ "$1" = "kill" ]; then
function_kill_mysql
else
printf “Usage: /data0/mysql/${mysql_port}/mysql {start|stop|restart|kill}\n”
fi
⑤、赋予shell脚本可执行权限:
chmod +x /data0/mysql/3306/mysql⑥、启动MySQL:
/data0/mysql/3306/mysql start⑦、通过命令行登录管理MySQL服务器(提示输入密码时直接回车):
/usr/local/webserver/mysql/bin/mysql -u root -p -S /tmp/mysql.sock⑧、输入以下SQL语句,创建一个具有root权限的用户(admin)和密码(12345678):
GRANT ALL PRIVILEGES ON *.* TO ‘admin’@'localhost’ IDENTIFIED BY ’12345678′;GRANT ALL PRIVILEGES ON *.* TO ‘admin’@’127.0.0.1′ IDENTIFIED BY ’12345678′;
⑨、(可选)停止MySQL:
/data0/mysql/3306/mysql stop
3、编译安装PHP(FastCGI模式)
XML/HTML代码- tar zxvf php-5.2.10.tar.gz
- gzip -cd php-5.2.10-fpm-0.5.11.diff.gz | patch -d php-5.2.10 -p1
- cd php-5.2.10/
- ./configure –prefix=/usr/local/webserver/php –with-config-file-path=/usr/local/webserver/php/etc –with-mysql=/usr/local/webserver/mysql –with-mysqli=/usr/local/webserver/mysql/bin/mysql_config –with-iconv-dir=/usr/local –with-freetype-dir –with-jpeg-dir –with-png-dir –with-zlib –with-libxml-dir=/usr –enable-xml –disable-rpath –enable-discard-path –enable-safe-mode –enable-bcmath –enable-shmop –enable-sysvsem –enable-inline-optimization –with-curl –with-curlwrappers –enable-mbregex –enable-fastcgi –enable-fpm –enable-force-cgi-redirect –enable-mbstring –with-mcrypt –with-gd –enable-gd-native-ttf –with-openssl –with-mhash –enable-pcntl –enable-sockets –with-ldap –with-ldap-sasl –with-xmlrpc –enable-zip –enable-soap –without-pear
- make ZEND_EXTRA_LIBS=’-liconv’
- make install
- cp php.ini-dist /usr/local/webserver/php/etc/php.ini
- cd ../
- curl http://pear.php.net/go-pear | /usr/local/webserver/php/bin/php
4、编译安装PHP5扩展模块
XML/HTML代码- tar zxvf memcache-2.2.5.tgz
- cd memcache-2.2.5/
- /usr/local/webserver/php/bin/phpize
- ./configure –with-php-config=/usr/local/webserver/php/bin/php-config
- make
- make install
- cd ../
- tar jxvf eaccelerator-0.9.5.3.tar.bz2
- cd eaccelerator-0.9.5.3/
- /usr/local/webserver/php/bin/phpize
- ./configure –enable-eaccelerator=shared –with-php-config=/usr/local/webserver/php/bin/php-config
- make
- make install
- cd ../
- tar zxvf PDO_MYSQL-1.0.2.tgz
- cd PDO_MYSQL-1.0.2/
- /usr/local/webserver/php/bin/phpize
- ./configure –with-php-config=/usr/local/webserver/php/bin/php-config –with-pdo-mysql=/usr/local/webserver/mysql
- make
- make install
- cd ../
- tar zxvf ImageMagick.tar.gz
- cd ImageMagick-6.5.1-2/
- ./configure
- make
- make install
- cd ../
- tar zxvf imagick-2.2.2.tgz
- cd imagick-2.2.2/
- /usr/local/webserver/php/bin/phpize
- ./configure –with-php-config=/usr/local/webserver/php/bin/php-config
- make
- make install
- cd ../
5、修改php.ini文件
手工修改:查找/usr/local/webserver/php/etc/php.ini中的extension_dir = “./”
修改为extension_dir = “/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/”
并在此行后增加以下几行,然后保存:
extension = “memcache.so”
extension = “pdo_mysql.so”
extension = “imagick.so”
再查找output_buffering = Off
修改为output_buffering = On
自动修改:若嫌手工修改麻烦,可执行以下shell命令,自动完成对php.ini文件的修改:
XML/HTML代码- sed -i ‘s#extension_dir = “./”#extension_dir = “/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/”\nextension = “memcache.so”\nextension = “pdo_mysql.so”\nextension = “imagick.so”\n#’ /usr/local/webserver/php/etc/php.ini
- sed -i ‘s#output_buffering = Off#output_buffering = On#’ /usr/local/webserver/php/etc/php.ini
- sed -i “s#; always_populate_raw_post_data = On#always_populate_raw_post_data = On#g” /usr/local/webserver/php/etc/php.ini
6、配置eAccelerator加速PHP:
XML/HTML代码- mkdir -p /usr/local/webserver/eaccelerator_cache
- vi /usr/local/webserver/php/etc/php.ini
按shift+g键跳到配置文件的最末尾(按两下g回到页首),加上以下配置信息:
XML/HTML代码- [eaccelerator]
- zend_extension=”/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so”
- eaccelerator.shm_size=”64″
- eaccelerator.cache_dir=”/usr/local/webserver/eaccelerator_cache”
- eaccelerator.enable=”1″
- eaccelerator.optimizer=”1″
- eaccelerator.check_mtime=”1″
- eaccelerator.debug=”0″
- eaccelerator.filter=”"
- eaccelerator.shm_max=”0″
- eaccelerator.shm_ttl=”3600″
- eaccelerator.shm_prune_period=”3600″
- eaccelerator.shm_only=”0″
- eaccelerator.compress=”1″
- eaccelerator.compress_level=”9″
7、创建www用户和组,以及供blog.s135.com和www.s135.com两个虚拟主机使用的目录:
XML/HTML代码- /usr/sbin/groupadd www
- /usr/sbin/useradd -g www www
- mkdir -p /data0/htdocs/blog
- chmod +w /data0/htdocs/blog
- chown -R www:www /data0/htdocs/blog
- mkdir -p /data0/htdocs/www
- chmod +w /data0/htdocs/www
- chown -R www:www /data0/htdocs/www
8、创建php-fpm配置文件(php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi):
在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件:
- rm -f /usr/local/webserver/php/etc/php-fpm.conf
- vi /usr/local/webserver/php/etc/php-fpm.conf
输入以下内容(如果您安装 Nginx + PHP 用于程序调试,请将以下的<value name=”display_errors”>0</value>改为<value name=”display_errors”>1</value>,以便显示PHP错误信息,否则,Nginx 会报状态为500的空白错误页):
XML/HTML代码- <?xml version=”1.0″ ?>
- <configuration>
- All relative paths in this config are relative to php’s install prefix
- <section name=”global_options”>
- Pid file
- <value name=”pid_file”>/usr/local/webserver/php/logs/php-fpm.pid</value>
- Error log file
- <value name=”error_log”>/usr/local/webserver/php/logs/php-fpm.log</value>
- Log level
- <value name=”log_level”>notice</value>
- When this amount of php processes exited with SIGSEGV or SIGBUS …
- <value name=”emergency_restart_threshold”>10</value>
- … in a less than this interval of time, a graceful restart will be initiated.
- Useful to work around accidental curruptions in accelerator’s shared memory.
- <value name=”emergency_restart_interval”>1m</value>
- Time limit on waiting child’s reaction on signals from master
- <value name=”process_control_timeout”>5s</value>
- Set to ‘no’ to debug fpm
- <value name=”daemonize”>yes</value>
- </section>
- <workers>
- <section name=”pool”>
- Name of pool. Used in logs and stats.
- <value name=”name”>default</value>
- Address to accept fastcgi requests on.
- Valid syntax is ‘ip.ad.re.ss:port’ or just ‘port’ or ‘/path/to/unix/socket’
- <value name=”listen_address”>127.0.0.1:9000</value>
- <value name=”listen_options”>
- Set listen(2) backlog
- <value name=”backlog”>-1</value>
- Set permissions for unix socket, if one used.
- In Linux read/write permissions must be set in order to allow connections from web server.
- Many BSD-derrived systems allow connections regardless of permissions.
- <value name=”owner”></value>
- <value name=”group”></value>
- <value name=”mode”>0666</value>
- </value>
- Additional php.ini defines, specific to this pool of workers.
- <value name=”php_defines”>
- <value name=”sendmail_path”>/usr/sbin/sendmail -t -i</value>
- <value name=”display_errors”>1</value>
- </value>
- Unix user of processes
- <value name=”user”>www</value>
- Unix group of processes
- <value name=”group”>www</value>
- Process manager settings
- <value name=”pm”>
- Sets style of controling worker process count.
- Valid values are ‘static’ and ‘apache-like’
- <value name=”style”>static</value>
- Sets the limit on the number of simultaneous requests that will be served.
- Equivalent to Apache MaxClients directive.
- Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
- Used with any pm_style.
- <value name=”max_children”>128</value>
- Settings group for ‘apache-like’ pm style
- <value name=”apache_like”>
- Sets the number of server processes created on startup.
- Used only when ‘apache-like’ pm_style is selected
- <value name=”StartServers”>20</value>
- Sets the desired minimum number of idle server processes.
- Used only when ‘apache-like’ pm_style is selected
- <value name=”MinSpareServers”>5</value>
- Sets the desired maximum number of idle server processes.
- Used only when ‘apache-like’ pm_style is selected
- <value name=”MaxSpareServers”>35</value>
- </value>
- </value>
- The timeout (in seconds) for serving a single request after which the worker process will be terminated
- Should be used when ‘max_execution_time’ ini option does not stop script execution for some reason
- ’0s’ means ‘off’
- <value name=”request_terminate_timeout”>0s</value>
- The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
- ’0s’ means ‘off’
- <value name=”request_slowlog_timeout”>0s</value>
- The log file for slow requests
- <value name=”slowlog”>logs/slow.log</value>
- Set open file desc rlimit
- <value name=”rlimit_files”>65535</value>
- Set max core size rlimit
- <value name=”rlimit_core”>0</value>
- Chroot to this directory at the start, absolute path
- <value name=”chroot”></value>
- Chdir to this directory at the start, absolute path
- <value name=”chdir”></value>
- Redirect workers’ stdout and stderr into main error log.
- If not set, they will be redirected to /dev/null, according to FastCGI specs
- <value name=”catch_workers_output”>yes</value>
- How much requests each process should execute before respawn.
- Useful to work around memory leaks in 3rd party libraries.
- For endless request processing please specify 0
- Equivalent to PHP_FCGI_MAX_REQUESTS
- <value name=”max_requests”>102400</value>
- Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
- Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
- Makes sense only with AF_INET listening socket.
- <value name=”allowed_clients”>127.0.0.1</value>
- Pass environment variables like LD_LIBRARY_PATH
- All $VARIABLEs are taken from current environment
- <value name=”environment”>
- <value name=”HOSTNAME”>$HOSTNAME</value>
- <value name=”PATH”>/usr/local/bin:/usr/bin:/bin</value>
- <value name=”TMP”>/tmp</value>
- <value name=”TMPDIR”>/tmp</value>
- <value name=”TEMP”>/tmp</value>
- <value name=”OSTYPE”>$OSTYPE</value>
- <value name=”MACHTYPE”>$MACHTYPE</value>
- <value name=”MALLOC_CHECK_”>2</value>
- </value>
- </section>
- </workers>
- </configuration>
9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为200(如果服务器内存小于3GB,可以只开启64个进程),用户为www:
XML/HTML代码- ulimit -SHn 65535
- /usr/local/webserver/php/sbin/php-fpm start
注:/usr/local/webserver/php/sbin/php-fpm还有其他参数,包括:start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件使用reload。
三、安装Nginx 0.8.15
1、安装Nginx所需的pcre库:
- tar zxvf pcre-7.9.tar.gz
- cd pcre-7.9/
- ./configure
- make && make install
- cd ../
2、安装Nginx
tar zxvf nginx-0.8.15.tar.gzcd nginx-0.8.15/
./configure –user=www –group=www –prefix=/usr/local/webserver/nginx –with-http_stub_status_module –with-http_ssl_module
make && make install
cd ../
3、创建Nginx日志目录
mkdir -p /data1/logschmod +w /data1/logs
chown -R www:www /data1/logs
4、创建Nginx配置文件
①、在/usr/local/webserver/nginx/conf/目录中创建nginx.conf文件:
vi /usr/local/webserver/nginx/conf/nginx.conf
输入以下内容:
引用user www www;
worker_processes 8;
error_log /data1/logs/nginx_error.log crit;
pid /usr/local/webserver/nginx/nginx.pid;
#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 65535;
events
{
use epoll;
worker_connections 65535;
}
http
{
include mime.types;
default_type application/octet-stream;
#charset gb2312;
server_names_hash_bucket_size 128;
client_header_buffer_size 32k;
large_client_header_buffers 4 32k;
client_max_body_size 8m;
sendfile on;
tcp_nopush on;
keepalive_timeout 60;
tcp_nodelay on;
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 128k;
gzip on;
gzip_min_length 1k;
gzip_buffers 4 16k;
gzip_http_version 1.0;
gzip_comp_level 2;
gzip_types text/plain application/x-javascript text/css application/xml;
gzip_vary on;
#limit_zone crawler $binary_remote_addr 10m;
server
{
listen 80;
server_name blog.s135.com;
index index.html index.htm index.php;
root /data0/htdocs/blog;
#limit_conn crawler 20;
location ~ .*\.(php|php5)?$
{
#fastcgi_pass unix:/tmp/php-cgi.sock;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
{
expires 30d;
}
location ~ .*\.(js|css)?$
{
expires 1h;
}
log_format access ’$remote_addr – $remote_user [$time_local] “$request” ‘
‘$status $body_bytes_sent “$http_referer” ‘
‘”$http_user_agent” $http_x_forwarded_for’;
access_log /data1/logs/access.log access;
}
server
{
listen 80;
server_name www.s135.com;
index index.html index.htm index.php;
root /data0/htdocs/www;
location ~ .*\.(php|php5)?$
{
#fastcgi_pass unix:/tmp/php-cgi.sock;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
log_format wwwlogs ’$remote_addr – $remote_user [$time_local] “$request” ‘
‘$status $body_bytes_sent “$http_referer” ‘
‘”$http_user_agent” $http_x_forwarded_for’;
access_log /data1/logs/wwwlogs.log wwwlogs;
}
server
{
listen 80;
server_name status.blog.s135.com;
location / {
stub_status on;
access_log off;
}
}
}
②、在/usr/local/webserver/nginx/conf/目录中创建fcgi.conf文件:
vi /usr/local/webserver/nginx/conf/fcgi.conf输入以下内容:
引用fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with –enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;
5、启动Nginx
ulimit -SHn 65535/usr/local/webserver/nginx/sbin/nginx
四、配置开机自动启动Nginx + PHP
vi /etc/rc.local
在末尾增加以下内容:
引用ulimit -SHn 65535
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/webserver/nginx/sbin/nginx
五、优化Linux内核参数
vi /etc/sysctl.conf
在末尾增加以下内容:
引用# Add
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_recycle = 1
#net.ipv4.tcp_tw_len = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
#net.ipv4.tcp_fin_timeout = 30
#net.ipv4.tcp_keepalive_time = 120
net.ipv4.ip_local_port_range = 1024 65535
使配置立即生效:
/sbin/sysctl -p
六、在不停止Nginx服务的情况下平滑变更Nginx配置
1、修改/usr/local/webserver/nginx/conf/nginx.conf配置文件后,请执行以下命令检查配置文件是否正确:
/usr/local/webserver/nginx/sbin/nginx -t
如果屏幕显示以下两行信息,说明配置文件正确:
the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok
the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully
2、这时,输入以下命令查看Nginx主进程号:
ps -ef | grep “nginx: master process” | grep -v “grep” | awk -F ‘ ‘ ‘{print $2}’屏幕显示的即为Nginx主进程号,例如:
6302
这时,执行以下命令即可使修改过的Nginx配置文件生效:
或者无需这么麻烦,找到Nginx的Pid文件:
kill -HUP `cat /usr/local/webserver/nginx/nginx.pid`
七、编写每天定时切割Nginx日志的脚本
1、创建脚本/usr/local/webserver/nginx/sbin/cut_nginx_log.sh
vi /usr/local/webserver/nginx/sbin/cut_nginx_log.sh
输入以下内容:
引用#!/bin/bash
# This script run at 00:00
# The Nginx logs path
logs_path=”/usr/local/webserver/nginx/logs/”
mkdir -p ${logs_path}$(date -d “yesterday” +”%Y”)/$(date -d “yesterday” +”%m”)/
mv ${logs_path}access.log ${logs_path}$(date -d “yesterday” +”%Y”)/$(date -d “yesterday” +”%m”)/access_$(date -d “yesterday” +”%Y%m%d”).log
kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`
2、设置crontab,每天凌晨00:00切割nginx访问日志
crontab -e输入以下内容:
引用00 00 * * * /bin/bash /usr/local/webserver/nginx/sbin/cut_nginx_log.sh