继续上一篇的内容。上一篇的内容为：
Spark中Master源码分析（一） http://www.cnblogs.com/yourarebest/p/5312965.html
4.receive方法，receive方法中消息类型主要分为以下12种情况：
（1）重新选择了新Leader，进行数据的恢复
（2）恢复完毕，重新创建Driver，完成资源的重新分配
（3）触发Leadership的选举
（4）Master注册新的Worker
（5）Master注册新的App,然后重新分配资源
（6）Executor转态发生改变，比如正在运行，执行完毕后会发生的情况
（7）Driver转态发生变化,进行相应的操作
（8）心跳机制，通过该机制master和worker保持联系
（9）master对于app的状态的处理
（10）worker调度状态改变响应
（11）没有注册的app将认为已经完成了并移除
（12）通过worker是否超时，从而判断worker是否dead
12种情况详细代码如下所示：
（1）重新选择了新Leader，进行数据的恢复
case ElectedLeader => {
val (storedApps, storedDrivers, storedWorkers) = persistenceEngine.readPersistedData(rpcEnv)
state = if (storedApps.isEmpty && storedDrivers.isEmpty && storedWorkers.isEmpty) {
RecoveryState.ALIVE
} else {
RecoveryState.RECOVERING
}
logInfo("I have been elected leader! New state: " + state)
if (state == RecoveryState.RECOVERING) {
//恢复数据中
beginRecovery(storedApps, storedDrivers, storedWorkers)
//守护单线程1s后发送一个完成恢复的请求，并异步等待响应
recoveryCompletionTask = forwardMessageThread.schedule(new Runnable {
override def run(): Unit = Utils.tryLogNonFatalError {
self.send(CompleteRecovery)
}
}, WORKER_TIMEOUT_MS, TimeUnit.MILLISECONDS)
}
}
（2）恢复完毕，重新创建Driver，完成资源的重新分配
case CompleteRecovery => completeRecovery()详见下①
①completeRecovery方法如下：
private def completeRecovery() {
if (state != RecoveryState.RECOVERING) { return }
state = RecoveryState.COMPLETING_RECOVERY
//kill所有的不响应的workers和apps
workers.filter(.state == WorkerState.UNKNOWN).foreach(removeWorker)
apps.filter(.state == ApplicationState.UNKNOWN).foreach(finishApplication)
// 重新创建Driver
drivers.filter(_.worker.isEmpty).foreach { d =>
logWarning(s"Driver ${d.id} was not found after master recovery")
if (d.desc.supervise) {
logWarning(s"Re-launching ${d.id}")
relaunchDriver(d)详见下②
} else {
removeDriver(d.id, DriverState.ERROR, None)
logWarning(s"Did not re-launch ${d.id} because it was not supervised")
}
}
②relaunchDriver方法如下,将Driver的转态为RELAUNCHING，添加到即将创建的Driver列表中，然后重新分配资源
private def relaunchDriver(driver: DriverInfo) {
driver.worker = None
driver.state = DriverState.RELAUNCHING
waitingDrivers += driver
//重新分配资源，详见下③
schedule()
}
③schedule的方法如下，该方法主要为等待执行的apps安排可用的资源，每当一个新的app提交或可用资源（worker等）发生变化时调用
private def schedule(): Unit = {
if (state != RecoveryState.ALIVE) { return }
// Drivers优先于executors
// 通过Random.shuffle返回一个新的乱序排序的workers集合
val shuffledWorkers = Random.shuffle(workers)
for (worker <- shuffledWorkers if worker.state == WorkerState.ALIVE) {
for (driver <- waitingDrivers) {
if (worker.memoryFree >= driver.desc.mem && worker.coresFree >= driver.desc.cores) {
//根据worker和driver信息创建worker，详见下④
launchDriver(worker, driver)
waitingDrivers -= driver
}
}
}
//调用和创建workers上的executors
startExecutorsOnWorkers()
}
④ launchDriver方法如下，根据worker和driver信息创建worker
private def launchDriver(worker: WorkerInfo, driver: DriverInfo) {
logInfo("Launching driver " + driver.id + " on worker " + worker.id)
//将worker的资源分配给driver
worker.addDriver(driver)
driver.worker = Some(worker)
//worker将启动driver
worker.endpoint.send(LaunchDriver(driver.id, driver.desc))
//将driver的状态置位RUNNING
driver.state = DriverState.RUNNING
}
（3）触发Leadership的选举
case RevokedLeadership => {
logError("Leadership has been revoked -- master shutting down.")
System.exit(0)
}
（4）Master注册新的Worker，然后重新分配资源
case RegisterWorker(
id, workerHost, workerPort, workerRef, cores, memory, workerUiPort, publicAddress) => {
logInfo("Registering worker %s:%d with %d cores, %s RAM".format(
workerHost, workerPort, cores, Utils.megabytesToString(memory)))
if (state == RecoveryState.STANDBY) {
} else if (idToWorker.contains(id)) {
//通知worker注册失效，并退出
workerRef.send(RegisterWorkerFailed("Duplicate worker ID"))
} else {
val worker = new WorkerInfo(id, workerHost, workerPort, cores, memory,
workerRef, workerUiPort, publicAddress)
if (registerWorker(worker)) {
//将新添加的worker信息持久化
persistenceEngine.addWorker(worker)
//worker发送RegisteredWorker消息，并开始向master发送心跳
workerRef.send(RegisteredWorker(self, masterWebUiUrl))
//重新分配资源
schedule()
} else {
val workerAddress = worker.endpoint.address
logWarning("Worker registration failed. Attempted to re-register worker at same " + "address: " + workerAddress)workerRef.send(RegisterWorkerFailed("Attempted to re-register worker at same address: " + workerAddress))
}
}
}
（5）Master注册新的App,然后重新分配资源
case RegisterApplication(description, driver) => {
if (state == RecoveryState.STANDBY) {
} else {
logInfo("Registering app " + description.name)
//根据appdescription和driver创建app
val app = createApplication(description, driver)，详见下①
//注册app
registerApplication(app)，详见下②
logInfo("Registered app " + description.name + " with ID " + app.id)
//将app持久化
persistenceEngine.addApplication(app)
//driver将给AppClient发送RegisteredApplication消息
driver.send(RegisteredApplication(app.id, self))
//重新分配资源
schedule()
}
}
①createApplication方法如下，根据appdescription和driver创建app
private def createApplication(desc: ApplicationDescription, driver: RpcEndpointRef):
ApplicationInfo = {
val now = System.currentTimeMillis()
val date = new Date(now)
//用App的主构造器创建一个App
new ApplicationInfo(now, newApplicationId(date), desc, date, driver, defaultCores)
}
②registerApplication方法如下：
private def registerApplication(app: ApplicationInfo): Unit = {
val appAddress = app.driver.address
if (addressToApp.contains(appAddress)) {
logInfo("Attempted to re-register application at same address: " + appAddress)
return
}
//将app的源信息，比如状态、运行时间、核数注册到metrics系统中
applicationMetricsSystem.registerSource(app.appSource)
apps += app
idToApp(app.id) = app
endpointToApp(app.driver) = app
addressToApp(appAddress) = app
waitingApps += app
}
（6）Executor转态发生改变，比如正在运行，执行完毕后会发生的情况
case ExecutorStateChanged(appId, execId, state, message, exitStatus) => {
val execOption = idToApp.get(appId).flatMap(app => app.executors.get(execId))
execOption match {
case Some(exec) => {
val appInfo = idToApp(appId)
exec.state = state
//如果executor正在执行任务，将retry次数置位0
if (state == ExecutorState.RUNNING) { appInfo.resetRetryCount() } //给appClient发送ExecutorUpdated消息
exec.application.driver.send(ExecutorUpdated(execId, state, message, exitStatus))
//如果Executor执行完了，移除worker和app上的executor
if (ExecutorState.isFinished(state)) {
logInfo(s"Removing executor ${exec.fullId} because it is $state")
//如果一个app已经执行完了，将它的信息反馈在Web UI上
if (!appInfo.isFinished) {
appInfo.removeExecutor(exec)
}
exec.worker.removeExecutor(exec)
val normalExit = exitStatus == Some(0)
// 只要retry次数小于10，那么executor的资源就会不断的调整
if (!normalExit) {
if (appInfo.incrementRetryCount() < ApplicationState.MAX_NUM_RETRY) {
//调整资源
schedule()
} else {
val execs = appInfo.executors.values
if (!execs.exists(_.state == ExecutorState.RUNNING)) {
logError(s"Application ${appInfo.desc.name} with ID ${appInfo.id} failed " +
s"${appInfo.retryCount} times; removing it")
removeApplication(appInfo, ApplicationState.FAILED)
}
}
}
}
}
case None =>
logWarning(s"Got status update for unknown executor $appId/$execId")
}
}
（7）Driver转态发生变化,进行相应的操作
case DriverStateChanged(driverId, state, exception) => {
state match {
case DriverState.ERROR | DriverState.FINISHED | DriverState.KILLED | DriverState.FAILED =>
removeDriver(driverId, state, exception)
case _ =>
throw new Exception(s"Received unexpected state update for driver $driverId: $state")
}
}
（8）心跳机制，通过该机制master和worker保持联系
case Heartbeat(workerId, worker) => {
idToWorker.get(workerId) match {
case Some(workerInfo) =>
//更新worker的最后一次心跳时间
workerInfo.lastHeartbeat = System.currentTimeMillis()
case None =>
if (workers.map(_.id).contains(workerId)) {
logWarning(s"Got heartbeat from unregistered worker $workerId." +
" Asking it to re-register.")
worker.send(ReconnectWorker(masterUrl))
} else {
logWarning(s"Got heartbeat from unregistered worker $workerId." +
" This worker was never registered, so ignoring the heartbeat.")
}
}
}
（9）master对于app的状态的处理
case MasterChangeAcknowledged(appId) => {
idToApp.get(appId) match {
case Some(app) =>
logInfo("Application has been re-registered: " + appId)
app.state = ApplicationState.WAITING
case None =>
logWarning("Master change ack from unknown app: " + appId)
}
if (canCompleteRecovery) { completeRecovery() }
}
（10）worker调度状态改变响应
case WorkerSchedulerStateResponse(workerId, executors, driverIds) => {
idToWorker.get(workerId) match {
case Some(worker) =>
logInfo("Worker has been re-registered: " + workerId)
worker.state = WorkerState.ALIVE
val validExecutors = executors.filter(exec => idToApp.get(exec.appId).isDefined)
for (exec <- validExecutors) {
val app = idToApp.get(exec.appId).get
val execInfo = app.addExecutor(worker, exec.cores, Some(exec.execId))
worker.addExecutor(execInfo)
execInfo.copyState(exec)
}
for (driverId <- driverIds) {
drivers.find(_.id == driverId).foreach { driver =>
driver.worker = Some(worker)
driver.state = DriverState.RUNNING
worker.drivers(driverId) = driver
}
}
case None =>
logWarning("Scheduler state from unknown worker: " + workerId)
}
if (canCompleteRecovery) { completeRecovery() }
}
（11）没有注册的app将认为已经完成了并移除
case UnregisterApplication(applicationId) =>
logInfo(s"Received unregister request from application $applicationId")
idToApp.get(applicationId).foreach(finishApplication)
（12）通过worker是否超时，从而判断worker是否dead
case CheckForWorkerTimeOut => {
//移除Dead worker，如果系统当前时间-Worker超时（1min）>worker最后心跳时间，判断worker为dead并移除
timeOutDeadWorkers()
}