1、配置文件备份
支持SCP, FTP和SFTP协议。可以通过configupload命令将博科交换机的配置以文本格式存到本地。
本次使用的是FTP服务器。ftp服务器使用的FileZilla_Server软件。建议先安装这个软件，然后进行简单的配置。
备份配置文件：
Brocade_5300:admin> configupload
Protocol (scp, ftp, sftp, local) [ftp]: ftp
Server Name or IP Address [host]: 10.77.77.79 【光纤交换机默认管理IP是10.77.77.77。我笔记本配置IP是79】
User Name [user]: test【FTP服务器用户名】
Path/Filename [<home dir>/config.txt]: switch5300.txt
Section (all|chassis|switch [all]): all
Password:（输入FTP服务器密码）
configUpload complete: All selected config parameters are uploaded
Brocade_5300:admin> 2019/06/11-03:06:08, [CONF-1001], 109, FID 128, INFO, Brocade_5300, configUpload completed successfully for all.
Brocade_5300:admin>
备份过程并不会保存以下信息：
-
dnsConfig information
-
Passwords
2、配置文件恢复
Configuration file restoration
1.）Verify that the FTP service is running on the server where the backup configuration file is located.
2.）Connect to the switch and log in using an account assigned to the admin role, and if necessary with the chassis-role
permission.
3.) If there are any changed parameters in the configuration file that do not belong to SNMP,
Fabric Watch, or ACL, disable the switch by entering the switchDisable command.
4.) Enter the configDownload command.
The command becomes interactive and you are prompted for the required information.
5.)At the “Do you want to continue [y/n]” prompt, enter y.
6. )Wait for the configuration to be restored.
7. )If you disabled the switch, enter the switchEnable command when the process is finished.
恢复配置文件：
Brocade_5300:admin>switchdisable 停用交换机
Brocade_5300:admin> configdownload
Protocol (scp, ftp, sftp, local) [ftp]: ftp
Server Name or IP Address [host]: 10.77.77.79
User Name [user]: test
Path/Filename [<home dir>/config.txt]: switch5300.txt 【指定文件名称】
Section (all|chassis|switch [all]): all
*** CAUTION ***
This command is used to download a backed-up configuration
for a specific switch. If using a file from a different
switch, this file\'s configuration settings will override
any current switch settings. Downloading a configuration
file, which was uploaded from a different type of switch,
may cause this switch to fail. A switch reboot might be
required for some parameter changes to take effect.
configDownload operation may take several minutes
to complete for large files.
Do you want to continue [y/n]: y
Password:
duplicate license-key "9cSSeQQSTfx"
duplicate license-key "cQecdRfdeB"
duplicate license-key "cQecdQQRjdeD"
duplicate license-key "cQecdQQdhfdeP"
duplicate license-key "RQFBHTgGr9BrZgPZRg3GEYgMBS7DF"
duplicate license-key "GBfGZNJAAFBaCM3tgYA3fXGXBAE7N"
failed to save value of authspec mode to config database
Doing configDownload on switch ...
configDownload complete: All selected config parameters are downloaded
2019/06/11-03:09:59, [CONF-1000], 110, FID 128, INFO, Brocade_5300, configDownload completed successfully for all.
显示恢复成功。
Brocade_5300:admin>switchEnable
参考文档：Brocade Switch Cookbook.pdf
