1.用easy_install安装的时候
[root@idayuan ~]# easy_install pycurl
Searching for pycurl
Best match: pycurl 7.19.
Adding pycurl 7.19. to easy-install.pth file Using /usr/lib64/python2./site-packages
Processing dependencies for pycurl
Finished processing dependencies for pycurl
2.用pip安装的时候（由于已经安装完成所以只摘取了一些错误）
__main__.ConfigurationError: Could not run curl-config: [Errno ] No such file or directory
解决办法：
[root@idayuan ~]# yum install libcurl-devel
二。安装python-rrdtool时遇到的一些问题。
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no cairo-png.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
---------------------------------------------------------------------------- configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of cairo-png. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libcairo and its header files. If
you have not installed cairo-png, you can get it either from its original home on http://cairographics.org/releases/ You can find also find an archive copy on http://oss.oetiker.ch/rrdtool/pub/libs The last tested version of cairo-png is 1.10.. LIBS=-lm
LDFLAGS=
CPPFLAGS= ---------------------------------------------------------------------------- checking for cairo_svg_surface_create in -lcairo... no
checking for pkg-config... (cached) pkg-config
configure: WARNING:
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no cairo-svg.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
---------------------------------------------------------------------------- configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of cairo-svg. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libcairo and its header files. If
you have not installed cairo-svg, you can get it either from its original home on http://cairographics.org/releases/ You can find also find an archive copy on http://oss.oetiker.ch/rrdtool/pub/libs The last tested version of cairo-svg is 1.10.. LIBS=-lm
LDFLAGS=
CPPFLAGS= ---------------------------------------------------------------------------- checking for cairo_pdf_surface_create in -lcairo... no
checking for pkg-config... (cached) pkg-config
configure: WARNING:
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no cairo-pdf.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
---------------------------------------------------------------------------- configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of cairo-pdf. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libcairo and its header files. If
you have not installed cairo-pdf, you can get it either from its original home on http://cairographics.org/releases/ You can find also find an archive copy on http://oss.oetiker.ch/rrdtool/pub/libs The last tested version of cairo-pdf is 1.10.. LIBS=-lm
LDFLAGS=
CPPFLAGS= ---------------------------------------------------------------------------- checking for cairo_ps_surface_create in -lcairo... no
checking for pkg-config... (cached) pkg-config
configure: WARNING:
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no cairo-ps.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
---------------------------------------------------------------------------- configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of cairo-ps. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libcairo and its header files. If
you have not installed cairo-ps, you can get it either from its original home on http://cairographics.org/releases/ You can find also find an archive copy on http://oss.oetiker.ch/rrdtool/pub/libs The last tested version of cairo-ps is 1.10.. LIBS=-lm
LDFLAGS=
CPPFLAGS= ---------------------------------------------------------------------------- checking for pango_cairo_context_set_font_options in -lpangocairo-1.0... no
checking for pkg-config... (cached) pkg-config
configure: WARNING:
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no pangocairo.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
---------------------------------------------------------------------------- configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of pangocairo. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libpangocairo-1.0 and its header files. If
you have not installed pangocairo, you can get it either from its original home on http://ftp.gnome.org/pub/GNOME/sources/pango/1.28 You can find also find an archive copy on http://oss.oetiker.ch/rrdtool/pub/libs The last tested version of pangocairo is 1.28.. LIBS=-lm
LDFLAGS=
CPPFLAGS= ---------------------------------------------------------------------------- checking for glib_check_version in -lglib-2.0... no
checking for pkg-config... (cached) pkg-config
configure: WARNING:
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no glib-2.0.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
---------------------------------------------------------------------------- configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of glib-2.0. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libglib-2.0 and its header files. If
you have not installed glib-2.0, you can get it either from its original home on ftp://ftp.gtk.org/pub/glib/2.28/ You can find also find an archive copy on http://oss.oetiker.ch/rrdtool/pub/libs The last tested version of glib-2.0 is 2.28.. LIBS=-lm
LDFLAGS=
CPPFLAGS= ---------------------------------------------------------------------------- checking for xmlParseFile in -lxml2... no
checking for pkg-config... (cached) pkg-config
configure: WARNING:
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no libxml-2.0.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
---------------------------------------------------------------------------- configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of libxml-2.0. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libxml2 and its header files. If
you have not installed libxml-2.0, you can get it either from its original home on http://xmlsoft.org/downloads.html You can find also find an archive copy on http://oss.oetiker.ch/rrdtool/pub/libs The last tested version of libxml-2.0 is 2.7.. LIBS=-lm
LDFLAGS=
CPPFLAGS= -I/usr/include/libxml2 ---------------------------------------------------------------------------- configure: error: Please fix the library issues listed above and try again.
Traceback (most recent call last):
File "/bin/easy_install", line , in <module>
load_entry_point('setuptools==20.6.6', 'console_scripts', 'easy_install')()
File "build/bdist.linux-x86_64/egg/setuptools/command/easy_install.py", line , in main File "/usr/lib64/python2.7/distutils/core.py", line , in setup
dist.run_commands()
File "/usr/lib64/python2.7/distutils/dist.py", line , in run_commands
self.run_command(cmd)
File "/usr/lib64/python2.7/distutils/dist.py", line , in run_command
cmd_obj.run()
File "build/bdist.linux-x86_64/egg/setuptools/command/easy_install.py", line , in run File "build/bdist.linux-x86_64/egg/setuptools/command/easy_install.py", line , in easy_install File "build/bdist.linux-x86_64/egg/setuptools/command/easy_install.py", line , in install_item File "build/bdist.linux-x86_64/egg/setuptools/command/easy_install.py", line , in install_eggs File "build/bdist.linux-x86_64/egg/setuptools/command/easy_install.py", line , in build_and_install File "build/bdist.linux-x86_64/egg/setuptools/command/easy_install.py", line , in run_setup File "build/bdist.linux-x86_64/egg/setuptools/sandbox.py", line , in run_setup
File "/usr/lib64/python2.7/contextlib.py", line , in __exit__
self.gen.throw(type, value, traceback)
File "build/bdist.linux-x86_64/egg/setuptools/sandbox.py", line , in setup_context
File "/usr/lib64/python2.7/contextlib.py", line , in __exit__
self.gen.throw(type, value, traceback)
File "build/bdist.linux-x86_64/egg/setuptools/sandbox.py", line , in save_modules
File "build/bdist.linux-x86_64/egg/setuptools/sandbox.py", line , in resume
File "/usr/lib64/python2.7/pickle.py", line , in loads
return Unpickler(file).load()
File "/usr/lib64/python2.7/pickle.py", line , in load
dispatch[key](self)
File "/usr/lib64/python2.7/pickle.py", line , in load_reduce
value = func(*args)
TypeError: __init__() takes at least arguments ( given)
[root@idayuan ~]# yum -y install cairo-devel pango-devel libxml2-devel
Config is DONE!
With MMAP IO: yes
Build rrd_getopt: no
Build rrd_graph: yes
Static programs: no
Perl Modules: perl_piped perl_shared
Perl Binary: /usr/bin/perl
Perl Version: 5.16.
Perl Options: PREFIX=/opt/rrdtool-1.4. LIB=/opt/rrdtool-1.4./lib/perl/5.16.
Ruby Modules:
Ruby Binary: no
Ruby Options: sitedir=/opt/rrdtool-1.4./lib/ruby
Build Lua Bindings: no
Build Tcl Bindings: yes
Build Python Bindings: yes
Build rrdcgi: yes
Build librrd MT: yes
Use gettext: yes
With libDBI: no
With libwrap: no
Libraries: -lxml2 -lglib-2.0 -lcairo -lcairo -lcairo -lm -lcairo -lpng15 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lglib-2.0
Type 'make' to compile the software and use 'make install' to
install everything to: /opt/rrdtool-1.4..
... that wishlist is NO JOKE. If you find RRDtool useful
make me happy. Go to http://tobi.oetiker.ch/wish and
place an order.
-- Tobi Oetiker <tobi@oetiker.ch>
----------------------------------------------------------------
In file included from /usr/include/python2./pyconfig.h::,
from /usr/include/python2./Python.h:,
from rrdtool-1.4./bindings/python/rrdtoolmodule.c::
/usr/include/python2./pyconfig-.h::: warning: "_POSIX_C_SOURCE" redefined [enabled by default]
#define _POSIX_C_SOURCE 200112L
^
In file included from rrdtool-1.4./bindings/python/../../src/rrd_config_bottom.h::,
from rrdtool-1.4./bindings/python/../../rrd_config.h:,
from rrdtool-1.4./bindings/python/rrdtoolmodule.c::
/usr/include/features.h::: note: this is the location of the previous definition
# define _POSIX_C_SOURCE 200809L
^
In file included from /usr/include/python2./pyconfig.h::,
from /usr/include/python2./Python.h:,
from rrdtool-1.4./bindings/python/rrdtoolmodule.c::
/usr/include/python2./pyconfig-.h::: warning: "_XOPEN_SOURCE" redefined [enabled by default]
#define _XOPEN_SOURCE 600
^
In file included from rrdtool-1.4./bindings/python/../../src/rrd_config_bottom.h::,
from rrdtool-1.4./bindings/python/../../rrd_config.h:,
from rrdtool-1.4./bindings/python/rrdtoolmodule.c::
/usr/include/features.h::: note: this is the location of the previous definition
# define _XOPEN_SOURCE
^
/usr/bin/ld: cannot find -lrrd
collect2: error: ld returned exit status
error: Setup script exited with error: command 'gcc' failed with exit status