Wallys|wifi6 Qualcomm IPQ8072A 4T4R support QCN9074/QCN6024 MOUDLE OPENWRT 802.11AX 10GE port 10G SF

时间:2022-12-14 10:55:02


DR8072 V01

Network SBC based on Qualcomm IPQ8072A communication processor with two 10GbE interfaces. One of these interfaces is implemented through an SFP rack and the other is based on an RJ45 connector. In addition, the SBC has four gigabit Ethernet ports that provide WiFi 6 connectivity (AX3700) at 4x4 MIMO.

SoC -- Qualcomm Atheros IPQ8072A quad-core Arm Cortex-A53@ 2.2GHz Qualcomm Networking Pro 1200 Platform

System Memory - 512MB DDR4 2400 MHZ 16-bit interface (up to 2GB RAM is optional)

Storage -- 8MB NOR flash, 256MB NAND flash

network

wireless

Onboard 4×4 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax with a maximum of 17dBm per chain and up to 1147Mbps

Onboard 4×4 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax with a maximum of 17dBm per chain and up to 2475Mbps

Frequency -- 2.412 to 2.472 GHz and 5.150 to 5.825 GHz

Modulation technology OFDMA, BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

8x U.L antenna connector

The cable

1x 10Gbps Ethernet RJ45 port

1x 10Gbps SFP rack

4x Gigabit Ethernet RJ45 port

USB - Two USB 3.0 ports

Expansion - 1x MiniPCIe slot and PCIe 3.0

Debugging - 20 pin JTAG connector, 4 pin serial connector

Others -- 1x software reset button, 2x RGB LED

Power supply - Provides 12V power through a DC jack

The temperature ranges from -20oC to 70oC. Storage: -40oC to 90oC

Support WiFi 6E Card,802.11ax,QCN9074

IPQ8072 4x4 2.4G & 5G 802.11ax

Features

■ Qualcomm Atheros IPQ8072A AR Quad Core CPU

■ On-board 5GHz radio, up to 2475 Mbps physical data rate,On-board 2.4GHz radio, up to 1147Mbps physical data rate

■ 8 MB NOR Flash, 256MB NAND Flash(NAND Flash can be up to 1GB as optional)

■ Support 11ax TX Beamforming,Support 11ac/ax MU-MIMO DL and UL,Support OFDMA DL and UL

■ Supports Dynamic Frequency Selection (DFS)

■ DDR 1GB DDR3L(Support DDR3L can be up to 2GB as optional)

■ M.2 connector can support QCN9074 production

Wallys|wifi6 Qualcomm IPQ8072A 4T4R support QCN9074/QCN6024 MOUDLE OPENWRT 802.11AX 10GE port 10G SF

DR9074-6E(PN02.7)

QCN9074 802.11ax 4x4 MU-MIMO 6GHz wifi6E

QCN9074 supports 4x4MIMO, and the maximum speed can reach 4804Mbps in theory when the bandwidth is set to 160MHz. If you use 2x2MMO, you can support 4096-QAM with a theoretical maximum rate of 2882Mbps.

QCN9074 11ax 4x4 6G M.2

Features

■ Qualcomm Atheros QCN9074

■ 6GHz, max 23dBm per chain, up to 4949Mbps

■ Single Band 6GHz 4x4 WiFi 6E (802.11ax)

■ 4 spatial streams (4SS)

■ M.2 E Key Interface

■ PCI Express 3.0 Interface

Wallys|wifi6 Qualcomm IPQ8072A 4T4R support QCN9074/QCN6024 MOUDLE OPENWRT 802.11AX 10GE port 10G SF

  •  Absolute Maximum Rating

  • Parameter

    Rating

    Unit

    Operating Temperature Range

    -20 to +70

    ºC

    Storage Temperature Range

    -40 to +90

    ºC

    Operating Humidity Range

    5 to +95 (non-condensing)

    %

    Storage Humidity Range

    0 to +90 (non-condensing)

    %

  • Hardware Specifications

  • Symbol

    Parameter

    CPU

    Qualcomm Atheros Quad Core ARM Cortex 64-bit A53 Processor iPQ8072A 2.2GHz CPU

    CPU Frequency

    Derived from Qualcomm Atheros AP.HK09

    System Memory

    1x 512MB, DDR4 2400MHz 16-bit interface(RAM can be up to 2GB as optional)

    Frequency Range

    2.412~2.472GHz, 

    5.150~5.825GHz

    M.2 Slot

    1x M.2 Slot with PCIe 3.0

    Modulation Techniques

    OFDMA: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

    Environmental Temperature

    Operating: -20ºC to 70ºC, 

    Storage: -40ºC to 90ºC

    Flash

    NOR Flash: 8 MB 

    NAND Flash: 256MB(1GB optional)

    Wireless

    On-board 4x4 2.4GHz MU-MIMO OFDMA 802.11b/802.11g/802.11n/802.11ax, max 17dBm per chain 

    On-board 4x4 5GHz MU-MIMO OFDMA 802.11a/802.11n/80.211ac/802.11AX, max 17dBm per chain 

    8x U.FL Connectors

    Reset Buttons

    1x S/W Reset Button

    DC Jack Input

    1x DC Jack Connector: 12V

     

    Interface

    4x 1Gbps Ethernet Port, 

    1x 10Gbps Ethernet Port 

    1x 10Gbps SFP

    2x USB 3.0 Port 

    1x JTAG 20 Pin Connector 

    1x Serial Port 4 Pin Connector

    LED

    2x RGB LED Indicators

    Power Consumption

    TBD