小米路由器刷Xiaomi Mi WiFi Mini openwrt

时间:2020-12-05 04:27:43
Current Stable Release - OpenWrt 18.06.1, released on August, 18th 2018.
there is also  PandoraBox  firmware for Xiaomi Mini router.
步骤:
1,保证有外网
2,电脑连上lan口
The next few steps involve first loading the development version of the firmware, then loading a firmware version which provides SSH access with the last step being loading the OpenWRT firmware onto the router
小米路由器MINI(R1CM) can see this in web, MiWiFi 稳定版 2.22.9
开启小米路由器的SSH功能之后用户可以获得root权限
小结:
u盘先格式成fat32,里面不要放任何文件
下载开发固件升级 miwifi.bin ,因为稳定版不能刷ssh固件
  1. 断开小米路由器的电源,将U盘插入USB接口;
  2. 按住reset按钮之后重新接入电源,指示灯变为黄色闪烁状态即可松开reset键;
  3. 等待3-5秒后安装完成之后,小米路由器会自动重启
U盘记得及时拔出来
2,再格式化下u盘,用app连上刷了开发固件的路由器, http://d.miwifi.com/rom/ssh (或者通过 http://www1.miwifi.com/miwifi_open.html的开启ssh工具 下载ssh固件 miwifi_ssh.bin
小米路由器刷Xiaomi Mi WiFi Mini openwrt
  1. 断开小米路由器的电源,将U盘插入USB接口;
  2. 按住reset按钮之后重新接入电源,指示灯变为黄色闪烁状态即可松开reset键;
  3. 等待3-5秒后安装完成之后,小米路由器会自动重启
wait a while
U盘记得及时拔出来
BusyBox v1.19.4 (2018-06-21 09:07:05 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.
-----------------------------------------------------
Welcome to XiaoQiang!
-----------------------------------------------------
$$$$$$\ $$$$$$$\ $$$$$$$$\ $$\ $$\ $$$$$$\ $$\ $$\
$$ __$$\ $$ __$$\ $$ _____| $$ | $$ | $$ __$$\ $$ | $$ |
$$ / $$ |$$ | $$ |$$ | $$ | $$ | $$ / $$ |$$ |$$ /
$$$$$$$$ |$$$$$$$ |$$$$$\ $$ | $$ | $$ | $$ |$$$$$ /
$$ __$$ |$$ __$$< $$ __| $$ | $$ | $$ | $$ |$$ $$<
$$ | $$ |$$ | $$ |$$ | $$ | $$ | $$ | $$ |$$ |\$$\
$$ | $$ |$$ | $$ |$$$$$$$$\ $$$$$$$$$ | $$$$$$ |$$ | \$$\
\__| \__|\__| \__|\________| \_________/ \______/ \__| \__|
are u ok
uname -a
Linux XiaoQiang 2.6.36 #1 MiWiFi-R1CM-2.21.109 Thu Jun 21 09:31:24 UTC 2018 mips GNU/Linux
最后刷openwrt
  • Get the latest firmware, eg: # cd /tmp; wget <link to firmware-image as shown above>
  • Check the MTD layout: # cat /proc/mtd
  • If you find a line “OS1” go ahead with flashing: # mtd -r write <firmware-image you downloaded> OS1

mtd -r write /tmp/openwrt-18.06.1-ramips-mt7620-miwifi-mini-squashfs-sysupgrade.bin OS1
Unlocking OS1 ...
Writing from /tmp/openwrt-18.06.1-ramips-mt7620-miwifi-mini-squashfs-sysupgrade.bin to OS1 ...
Rebooting ...
  After flashing is complete, the router will reboot . When finished you can login using telnet or web-interface on a LAN-connected client to host 192.168.1.1. User: root, no password.
SSH will be enabled after you set a password (using  passwd  or LuCI web interface), telnet will be disabled.
Please note that the OpenWrt binary defaults to the red color of the led instead of the orange/blue during and after finishing the boot.
如果ping 不通192.168.1.1等路由器一直红灯时再重启下即可