文件名称：D11 手册DA11_Manual
文件大小：997KB
文件格式：PDF
更新时间：2016-09-02 10:19:38
D11
Quickstart Guide- Basic Settings To familiarize yourself with the operation of the front panel controls of the DA11, it is advisable to connect the DA11 to AC power before making any other connections, and to perform the following procedure- the Setting example (below). First, here are some basics: All switches on the DA11 are spring-loaded three position toggles, and automatically return to the center (no function) position. They are: (left-right), Exit-Set, Wide-Narrow, and Up-Down. The two switches under the SELECT legend are used to change basic settings. - Click the switch down to enter the Setting mode. A flashing LED appears as a “cursor” to indicate which setting can be changed. The display under the IMAGE legend has changed modes from the >PiC<™ status to displaying setting status. - The switch now moves the cursor left or right as indicated by the arrows. - The right switch toggles the setting at the cursor position “On” or “Off” each time the switch is clicked down in the “set” direction. Clicking more than once is OK! - Click the right switch up towards “exit” to exit the Setting mode. - Setting example- usb input, output “On,” pin 2 Hot for RCA connection