文件名称：ccna实验之NAT，用的是繁荣模拟器
文件大小：9KB
文件格式：RAR
更新时间：2013-01-28 17:16:44
ccna实验
Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#no ip domain-lookup Router(config)#ho r1 r1(config)#line con 0 r1(config-line)#logg sy r1(config-line)#exec-t 00 r1(config-line)#exi r1(config)#int s1/2 r1(config-if)#ip add 12.1.1.1 255.255.255.0 r1(config-if)#no sh r1(config-if)#int lo0 *Mar 1 00:00:57.927: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 1 00:00:58.931: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up *Mar 1 00:00:59.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up r1(config-if)#ip add 1.1.1.1 255.255.255.0 *Mar 1 00:01:24.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down *Mar 1 00:02:04.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up r1(config-if)#exi r1(config)#router os 10 r1(config-router)#router-id 1.1.1.1 r1(config-router)#net 12.1.1.1 0.0.0.0 area 0 r1(config-router)#net 1.1.1.1 0.0.0.0 area 0 *Mar 1 00:03:50.707: %OSPF-5-ADJCHG: Process 10, Nbr 2.2.2.2 on Serial1/2 from LOADING to FULL, Loading Done r1(config-router)#end *Mar 1 00:04:37.359: %SYS-5-CONFIG_I: Configured from console by console r1#ping 3.3.3.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 20/56/100 ms
【文件预览】：
NAT&PAT
----NAT()
--------动态NAT()
--------静态NAT()
----PAT()
--------五句话()
--------四句话()