文件名称：msp430g2553官方例程C语言.zip
文件大小：211KB
文件格式：ZIP
更新时间：2023-05-29 17:12:02
msp430g2533
官方例程，包含uart，iic，ad10等具体例子。msp430g2x13_ca_01.c Comp_A, Output Reference Voltages on P1.1 msp430g2x13_ca_02.c Comp_A, Detect Threshold, Set P1.0 if P1.1 > 0.25*Vcc msp430g2x13_ca_03.c Comp_A, Simple 2.2V Low Battery Detect msp430g2x33_adc10_01.c ADC10, Sample A0, Set P1.0 if A0 > 0.5*AVcc msp430g2x33_adc10_02.c ADC10, Sample A1, 1.5V Ref, Set P1.0 if A1 > 0.2V msp430g2x33_adc10_03.c ADC10, ADC10, Sample A10 Temp, Set P1.0 if Temp ++ ~2C msp430g2x33_adc10_04.c ADC10, ADC10, Sample A1, Signed, Set P1.0 if A1 > 0.5*AVcc msp430g2x33_adc10_05.c ADC10, ADC10, Sample A11, Lo_Batt, Set P1.0 if AVcc < 2.3V msp430g2x33_adc10_06.c ADC10, ADC10, Output Internal Vref on P1.4 & ADCCLK on P1.3 msp430g2x33_adc10_07.c ADC10, DTC Sample A1 32x, AVcc, Repeat Single, DCO msp430g2x33_adc10_08.c ADC10, ADC10, DTC Sample A1 32x, 1.5V, Repeat Single, DCO msp430g2x33_adc10_09.c ADC10, ADC10, DTC Sample A10 32x, 1.5V, Repeat Single, DCO msp430g2x33_adc10_10.c ADC10, ADC10, DTC Sample A3-01, AVcc, Single Sequence, DCO msp430g2x33_adc10_11.c ADC10, ADC10, Sample A1, 1.5V, TA1 Trig, Set P1.0 if > 0.5V msp430g2x33_adc10_12.c ADC10, Sample A7, 1.5V, TA1 Trig, Ultra-Low Pwr msp430g2x33_adc10_13.c ADC10, DTC Sample A1 32x, AVcc, TA0 Trig, DCO msp430g2x33_adc10_14.c ADC10, DTC Sample A1-0 16x, AVcc, Repeat Seq, DCO msp430g2x33_adc10_16.c ADC10, ADC10, DTC Sample A0 -> TA1, AVcc, DCO msp430g2x33_adc10_temp.c ADC10, Sample A10 Temp and Convert to oC and oF msp430g2xx3_1.c Software Toggle P1.0 msp430g2xx3_1_vlo.c Software Toggle P1.0, MCLK = VLO/8 msp430g2xx3_clks.c Basic Clock, Output Buffered SMCLK, ACLK and MCLK/10 msp430g2xx3_dco_calib.c Basic Clock with preloaded DCO calibration constants msp430g2xx3_dco_flashcal.c DCO Calibration Constants Programmer msp430g2xx3_flashwrite_01.c Flash In-System Programming, Copy SegC to SegD msp430g2xx3_LFxtal_nmi.c LFXT1 Oscillator Fault Detection msp430g2xx3_lpm3.c Basic Clock, LPM3 Using WDT ISR, 32kHz ACLK msp430g2xx3_lpm3_vlo.c Basic Clock, LPM3 Using WDT ISR, VLO ACLK msp430g2xx3_nmi.c Basic Clock, Configure RST/NMI as NMI msp430g2xx3_P1_01.c Software Poll P1.4, Set P1.0 if P1.4 = 1 msp430g2xx3_P1_02.c Software Port Interrupt Service on P1.4 from LPM4 msp430g2xx3_P1_03.c Poll P1 With Software with Internal Pull-up msp430g2xx3_P1_04.c P1 Interrupt from LPM4 with Internal Pull-up msp430g2xx3_pinosc_01.c Capacitive Touch, Pin Oscillator Method, 1 button msp430g2xx3_pinosc_02.c Capacitive Touch, Pin Oscillator Method, 4-buttons msp430g2xx3_pinosc_03.c Capacitive Touch, Pin Oscillator Method, 4-buttons, ACLK for CCR msp430g2xx3_pinosc_04.c Capacitive Touch, Pin Oscillator Method, 8 buttons, UART msp430g2xx3_ta_01.c Timer_A, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK msp430g2xx3_ta_02.c Timer_A, Toggle P1.0, CCR0 Up Mode ISR, DCO SMCLK msp430g2xx3_ta_03.c Timer_A, Toggle P1.0, Overflow ISR, DCO SMCLK msp430g2xx3_ta_04.c Timer_A, Toggle P1.0, Overflow ISR, 32kHz ACLK msp430g2xx3_ta_05.c Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz ACLK msp430g2xx3_ta_06.c Timer_A, Toggle P1.0, CCR1 Cont. Mode ISR, DCO SMCLK msp430g2xx3_ta_07.c Timer_A, Toggle P1.0-2, Cont. Mode ISR, DCO SMCLK msp430g2xx3_ta_08.c Timer_A, Toggle P1.0-2, Cont. Mode ISR, 32kHz ACLK msp430g2xx3_ta_10.c Timer_A, Toggle P1.1/TA0, Up Mode, DCO SMCLK msp430g2xx3_ta_11.c Timer_A, Toggle P1.1/TA0, Up Mode, 32kHz ACLK msp430g2xx3_ta_13.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, DCO SMCLK msp430g2xx3_ta_14.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, 32kHz ACLK msp430g2xx3_ta_16.c Timer_A, PWM TA1-2, Up Mode, DCO SMCLK msp430g2xx3_ta_17.c
【文件预览】：
msp430g2553官方例程C语言
----msp430g2xx3_flashwrite_01.c(6KB)
----msp430g2xx3_wdt_07.c(4KB)
----msp430g2xx3_uscib0_i2c_08.c(6KB)
----msp430g2x33_adc10_04.c(4KB)
----msp430g2xx3_wdt_02.c(4KB)
----!Readme.txt(9KB)
----msp430g2xx3_usci_spi_standard_master.c(12KB)
----msp430g2x33_adc10_12.c(6KB)
----msp430g2xx3_uscib0_i2c_04.c(6KB)
----msp430g2xx3_uscib0_i2c_10.c(6KB)
----msp430g2xx3_uscib0_i2c_11.c(7KB)
----msp430g2xx3_uscia0_uart_01_9600.c(5KB)
----msp430g2x33_adc10_01.c(4KB)
----msp430g2x33_adc10_10.c(5KB)
----msp430g2xx3_ta_01.c(4KB)
----msp430g2xx3_dco_calib.c(5KB)
----msp430g2xx3_ta_10.c(4KB)
----msp430g2xx3_ta_07.c(5KB)
----msp430g2xx3_ta_05.c(4KB)
----msp430g2xx3_uscia0_uart_01_19200.c(5KB)
----msp430g2xx3_ta_08.c(5KB)
----msp430g2xx3_uscia0_irda_02.c(9KB)
----msp430g2xx3_lpm3.c(4KB)
----msp430g2x13_ca_01.c(4KB)
----msp430g2xx3_ta_uart2400.c(7KB)
----msp430g2xx3_uscia0_uart_07_9600.c(5KB)
----msp430g2xx3_ta_11.c(4KB)
----msp430g2xx3_dco_flashcal.c(7KB)
----msp430g2x33_adc10_09.c(5KB)
----msp430g2x33_adc10_06.c(5KB)
----msp430g2xx3_uscib0_i2c_01.c(7KB)
----msp430g2xx3_ta_19.c(4KB)
----msp430g2xx3_uscia0_irda_03.c(11KB)
----msp430g2x13_ca_03.c(4KB)
----msp430g2xx3_wdt_01.c(4KB)
----msp430g2xx3_usci_i2c_standard_master.c(13KB)
----msp430g2xx3_uscia0_spi_10.c(5KB)
----msp430g2xx3_ta_06.c(4KB)
----msp430g2xx3_clks.c(4KB)
----msp430g2xx3_usci_uart_standard_transceiver.c(6KB)
----msp430g2xx3_ta_02.c(4KB)
----msp430g2xx3_uscia0_uart_01_115k_lpm.c(5KB)
----msp430g2xx3_LFxtal_nmi.c(5KB)
----msp430g2xx3_1.c(3KB)
----msp430g2x33_adc10_05.c(4KB)
----msp430g2xx3_uscia0_uart_01_115k.c(5KB)
----msp430g2xx3_uscia0_uart_05_9600.c(5KB)
----msp430g2xx3_nmi.c(4KB)
----msp430g2x13_ca_02.c(4KB)
----msp430g2x33_adc10_14.c(5KB)
----msp430g2xx3_P1_01.c(3KB)
----msp430g2xx3_ta_14.c(4KB)
----msp430g2xx3_ta_16.c(4KB)
----msp430g2xx3_uscib0_i2c_06.c(6KB)
----msp430g2xx3_wdt_05.c(4KB)
----msp430g2x33_adc10_08.c(5KB)
----msp430g2xx3_ta_21.c(7KB)
----msp430g2x33_adc10_16.c(5KB)
----msp430g2xx3_wdt_06.c(4KB)
----msp430g2x33_adc10_13.c(5KB)
----msp430g2xx3_lpm3_vlo.c(4KB)
----msp430g2xx3_ta_17.c(4KB)
----msp430g2xx3_ta_13.c(4KB)
----msp430g2xx3_P1_03.c(4KB)
----msp430g2xx3_usci_spi_standard_slave.c(11KB)
----msp430g2x33_adc10_02.c(5KB)
----msp430g2xx3_uscib0_i2c_07.c(5KB)
----msp430g2xx3_uscib0_i2c_05.c(5KB)
----msp430g2xx3_ta_uart9600.c(12KB)
----msp430g2xx3_uscia0_spi_09.c(6KB)
----msp430g2xx3_uscib0_i2c_03.c(7KB)
----msp430g2xx3_ta_03.c(4KB)
----msp430g2xx3_P1_02.c(4KB)
----msp430g2xx3_uscia0_uart_06_9600.c(5KB)
----msp430g2xx3_P1_04.c(4KB)
----msp430g2xx3_uscib0_i2c_09.c(6KB)
----msp430g2xx3_uscib0_i2c_12.c(9KB)
----msp430g2xx3_uscib0_i2c_13.c(8KB)
----msp430g2xx3_ta_20.c(4KB)
----msp430g2xx3_wdt_04.c(4KB)
----msp430g2x33_adc10_11.c(5KB)
----msp430g2xx3_ta_04.c(4KB)
----msp430g2xx3_1_vlo.c(4KB)
----msp430g2x33_adc10_03.c(6KB)
----msp430g2xx3_uscib0_i2c_02.c(6KB)
----msp430g2xx3_uscia0_irda_01.c(6KB)
----msp430g2xx3_usci_i2c_standard_slave.c(12KB)
----msp430g2x33_adc10_07.c(5KB)
----msp430g2x33_adc10_temp.c(5KB)
----msp430g2xx3_uscia0_uart_08_9600.c(6KB)