【文件属性】：
文件名称：oracle asm rac
文件大小：5.95MB
文件格式：DOC
更新时间：2017-01-31 09:27:52
oracle
一、安装前准备
磁盘规划
使用iscsi共享磁盘做成raw设备
Vote_OCR /dev/sdb1 /dev/raw/raw1
Vote_OCR /dev/sdb2 /dev/raw/raw2
Vote_OCR /dev/sdb3 /dev/raw/raw3
Vote_OCR /dev/sdb5 /dev/raw/raw4
Vote_OCR /dev/sdb6 /dev/raw/raw5
DATA / dev/sdb7 /dev/raw/raw6
DATA dev/sdb8 /dev/raw/raw7
DATA dev/sdb9 /dev/raw/raw8
FLR dev/sdb10 /dev/raw/raw9
FLR dev/sdb11 /dev/raw/raw10
以下操作如果没有特殊说明在两个节点都做相同操作
网络及主机名规划
#public
192.168.10.10 node1
192.168.10.20 node2
#vip
192.168.10.100 node1vip
192.168.10.200 node2vip
#private
192.168.20.10 node1priv
192.168.20.20 node2priv
#scan
192.168.10.101 scanip
修改/etc/hosts文件添加以上内容
# vi /etc/hosts
192.168.10.10 node1
192.168.10.20 node2
#vip
192.168.10.100 node1vip
192.168.10.200 node2vip
#private
192.168.20.10 node1priv
192.168.20.20 node2priv
#scan
192.168.10.101 scanip
修改以下文件的最后一行
# vi /etc/sysconfig/network
HOSTNAME=node1 ---第二台机器修改为node2
命令行修改
# hostname node1
第二节点修改为 node2
执行
[root@localhost ~]# su -
[root@node1 ~]#
我们在安装虚拟机时添加了两块网卡
在这里我们把 eth0作为对外访问使用
eth1作为对对内访问使用
配置IP地址
使用setup命令修改IP
分别配置eth0和eth1(我们只演示node1的配置，node2也配置成相应的IP)
保存退出
重启使配置生效
3、关闭没必要的服务
chkconfig autofs off
chkconfig acpid off
chkconfig sendmail off
chkconfig cups-config-daemon off
chkconfig cpus off
chkconfig xfs off
chkconfig lm_sensors off
chkconfig gpm off
chkconfig openibd off
chkconfig iiim off
chkconfig pcmcia off
chkconfig cpuspeed off
chkconfig nfslock off
chkconfig ip6tables off
chkconfig rpcidmapd off
chkconfig apmd off
chkconfig sendmail off
chkconfig arptables_jf off
chkconifg microcode_ctl off
chkconfig rpcgssd off
上述服务有不存在的会提示，服务中读取信息时出错：没有那个文件或目录。没问题，忽略。
停用NTP服务
/sbin/service ntpd stop
chkconfig ntpd off
mv /etc/ntp.conf /etc/ntp.conf.bak
重启所有节点
安装yum源规划
在/etc/yum.repos.d/ 目录下添加rhel5.repo文件
[root@node1 yum.repos.d]# pwd
/etc/yum.repos.d
[root@node1 yum.repos.d]# ls
rhel5.repo
[root@node1 yum.repos.d]#
[root@node1 yum.repos.d]# vi rhel5.repo
[Server]
name=server
baseurl=file:///mnt/Server/
enabled=1
gpgcheck=0
[ClusterStorage]
name=server
baseurl=file:///mnt/ClusterStorage/
enabled=1
gpgcheck=0
挂载光驱到/mnt目录
[root@node1 yum.repos.d]# mount /dev/hdc /mnt
mount: block device /dev/hdc is write-protected, mounting read-only
[root@node1 yum.repos.d]# cd /mnt/
[root@node1 mnt]# ls Server ClusterStorage -ld
dr-xr-xr-x 3 root root 8192 2010-03-22 ClusterStorage
dr-xr-xr-x 3 root root 557056 2010-03-22 Server
[root@node1 mnt]#
刷新yum列表
[root@node1 mnt]# yum clean all
Loaded plugins: rhnplugin, security
Cleaning up Everything
[root@node1 mnt]#
4、软件包规划
安装所有依赖包
binutils-*
compat-libstdc++-*
elfutils-libelf-*
elfutils-libelf-devel-*
gcc-*
gcc-c++-*
glibc-*
glibc-common-*
glibc-devel-*
glibc-headers-*
ksh-*
libaio-*
libaio-devel-*
libgcc-*
libstdc++-*
make-*
sysstat-*
expat-*
pdksh-*
unixODBC-*
使用YUM安装
# yum install -y binutils-* compat-libstdc++-* elfutils-libelf-* elfutils-libelf-devel-* gcc-* gcc-c++-* glibc-* glibc-common-* glibc-devel-* glibc-headers-* ksh-* libaio-* libaio-devel-* libgcc-* libstdc++-* make-* sysstat-* expat-* pdksh-* unixODBC-*
5、建立用户和目录
用户及目录规划
/usr/sbin/groupadd -g 501 oinstall
/usr/sbin/groupadd -g 502 dba
/usr/sbin/groupadd -g 504 asmadmin
/usr/sbin/groupadd -g 506 asmdba
/usr/sbin/groupadd -g 507 asmoper
/usr/sbin/useradd -u 501 -g oinstall -G asmadmin,asmdba,asmoper,dba grid
/usr/sbin/useradd -u 502 -g oinstall -G dba,asmdba oracle
# passwd grid
Changing password for user grid.
New UNIX password:
BAD PASSWORD: it is too short
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
[root@node1 /]# passwd oracle
Changing password for user oracle.
New UNIX password:
BAD PASSWORD: it is based on a dictionary word
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
创建grid目录结构
mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01/app/oraInventory
chmod -R 775 /u01/app/oraInventory
mkdir -p /u01/app/grid
chmod -R 775 /u01/app/grid
chown -R grid:oinstall /u01/app/grid
mkdir -p /u01/app/11.2.0/grid
chown -R grid:oinstall /u01/app/11.2.0/grid
chmod -R 775 /u01/app/11.2.0/grid
创建oracle目录结构
mkdir -p /u01/app/oracle
mkdir /u01/app/oracle/cfgtoollogs
chown -R oracle:oinstall /u01/app/oracle
chmod -R 775 /u01/app/oracle
mkdir -p /u01/app/oracle/product/11.2.0/db_1
chown -R oracle:oinstall /u01/app/oracle/product/11.2.0/db_1
chmod -R 775 /u01/app/oracle/product/11.2.0/db_1
mkdir –p /u01/software
chmod -R 775 /u01
iscsi共享存储规划
（分为server端和client端，我们这里是实验环境，为了节省机器，有一台机器既做服务器同时也做客户端，另一台只有客户端。注：node1这个虚拟机尽量内存稍微大一些），下面我们开始配置。
在node1上准备要使用的磁盘,并做成相应的raw设备
我们在配置虚拟机的时候加了一块20G的盘 sdb
安装和配置
Node1+iscsi端：
[root@node1 mnt]# yum install -y *scsi*
[root@node1 /]# vi /etc/tgt/targets.conf
#添加以下几行
#注：红色部分是在我们存储客户端登录的时候需要
backing-store /dev/sdb # Becomes LUN 1
[root@node1 /]# /etc/init.d/tgtd restart
[root@node1 /]# chkconfig tgtd on
[root@node1 /]#cd /etc/rc.d/rc5.d/
[root@node1 rc5.d]# mv S13iscsi S40iscsi
[root@node1 rc5.d]#
[root@node1 ~]# /etc/init.d/iscsi start
[root@node1 ~] iscsiadm -m discovery -t st -p 192.168.10.10 <-----(存储地址)
192.168.10.10:3260,1 iqn.2012-09.com.example:server.target4
[root@node1 ~]#iscsiadm -m node -T iqn.2012-09.com.example:server.target4 -p 192.168.10.10 -l
Logging in to [iface: default, target: iqn.2012-09.com.example:server.target4, portal: 192.168.10.10,3260]
Login to [iface: default, target: iqn.2012-09.com.example:server.target4, portal: 192.168.10.10,3260]: successful
查看磁盘信息
[root@node1 /]# fdisk -l
Node2端：
[root@node2 ~]# yum install *scsi* -y
[root@node2 ~]# /etc/init.d/iscsi start
[root@node2 ~]# iscsiadm -m discovery -t st -p 192.168.10.10 <-----(存储地址)
192.168.10.10:3260,1 iqn.2012-09.com.example:server.target4
[root@node2 ~]#iscsiadm -m node -T iqn.2012-09.com.example:server.target4 -p 192.168.10.10 -l
Logging in to [iface: default, target: iqn.2012-09.com.example:server.target4, portal: 192.168.10.10,3260]
Login to [iface: default, target: iqn.2012-09.com.example:server.target4, portal: 192.168.10.10,3260]: successful
[root@node2 /]#
查看磁盘信息
# fdisk -l
在其中一个节点上分区
/dev/sdb 分成10个2G大小的分区
Device Boot Start End Blocks Id System
/dev/sdb1 1 1908 1953776 83 Linux
/dev/sdb2 1909 3816 1953792 83 Linux
/dev/sdb3 3817 5724 1953792 83 Linux
/dev/sdb4 5725 20480 15110144 5 Extended
/dev/sdb5 5725 7632 1953776 83 Linux
/dev/sdb6 7633 9540 1953776 83 Linux
/dev/sdb7 9541 11448 1953776 83 Linux
/dev/sdb8 11449 13356 1953776 83 Linux
/dev/sdb9 13357 15264 1953776 83 Linux
/dev/sdb10 15265 17172 1953776 83 Linux
/dev/sdb11 17173 19080 1953776 83 Linux
[root@node2 ~]# fdisk -l /dev/sdb
Disk /dev/sdb: 21.4 GB, 21474836480 bytes
64 heads, 32 sectors/track, 20480 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 1908 1953776 83 Linux
/dev/sdb2 1909 3816 1953792 83 Linux
/dev/sdb3 3817 5724 1953792 83 Linux
/dev/sdb4 5725 20480 15110144 5 Extended
/dev/sdb5 5725 7632 1953776 83 Linux
/dev/sdb6 7633 9540 1953776 83 Linux
/dev/sdb7 9541 11448 1953776 83 Linux
/dev/sdb8 11449 13356 1953776 83 Linux
/dev/sdb9 13357 15264 1953776 83 Linux
/dev/sdb10 15265 17172 1953776 83 Linux
/dev/sdb11 17173 19080 1953776 83 Linux
[root@node2 ~]#
做完分区之后 在两个节点上分别执行以下命令：
# partprobe
配置raw设备（每个节点都操作）
#vi /etc/udev/rules.d/60-raw.rules
ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sdb2", RUN+="/bin/raw /dev/raw/raw2 %N"
ACTION=="add", KERNEL=="sdb3", RUN+="/bin/raw /dev/raw/raw3 %N"
ACTION=="add", KERNEL=="sdb5", RUN+="/bin/raw /dev/raw/raw4 %N"
ACTION=="add", KERNEL=="sdb6", RUN+="/bin/raw /dev/raw/raw5 %N"
ACTION=="add", KERNEL=="sdb7", RUN+="/bin/raw /dev/raw/raw6 %N"
ACTION=="add", KERNEL=="sdb8", RUN+="/bin/raw /dev/raw/raw7 %N"
ACTION=="add", KERNEL=="sdb9", RUN+="/bin/raw /dev/raw/raw8 %N"
ACTION=="add", KERNEL=="sdb10", RUN+="/bin/raw /dev/raw/raw9 %N"
ACTION=="add", KERNEL=="sdb11", RUN+="/bin/raw /dev/raw/raw10 %N"
KERNEL=="raw*", OWNER="grid" GROUP="asmadmin", MODE="0660"
# start_udev
启动 udev：
[确定]
[root@node1 ~]# ll /dev/raw/
总计 0
crw-rw---- 1 grid asmadmin 162, 1 09-29 18:13 raw1
crw-rw---- 1 grid asmadmin 162, 10 09-29 18:13 raw10
crw-rw---- 1 grid asmadmin 162, 2 09-29 18:13 raw2
crw-rw---- 1 grid asmadmin 162, 3 09-29 18:13 raw3
crw-rw---- 1 grid asmadmin 162, 4 09-29 18:13 raw4
crw-rw---- 1 grid asmadmin 162, 5 09-29 18:13 raw5
crw-rw---- 1 grid asmadmin 162, 6 09-29 18:13 raw6
crw-rw---- 1 grid asmadmin 162, 7 09-29 18:13 raw7
crw-rw---- 1 grid asmadmin 162, 8 09-29 18:13 raw8
crw-rw---- 1 grid asmadmin 162, 9 09-29 18:13 raw9
[root@node1 ~]#
各类参数及所需配置设置
配置内核参数
vi /etc/sysctl.conf
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 6553600
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
# sysctl -p
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
net.ipv4.tcp_syncookies = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
fs.file-max = 6553600
fs.file-max = 6815744
fs.aio-max-nr = 1048576
修改limits文件，添加如下内容
vi /etc/security/limits.conf
grid soft nproc 2047
grid hard nproc 16384
grid soft nofile 1024
grid hard nofile 65536
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
配置hangcheck-timer
# modprobe hangcheck-timer hangcheck_tick=1 hangcheck_margin=10 hangcheck_reboot=1
修改pam文件
#vi /etc/pam.d/login
添加一行
session required pam_limits.so
修改profile文件
#vi /etc/profile
if [ $USER = "oracle" ] || [ $USER = "grid" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
umask 022
fi
配置ssh密钥互认(oracle和grid两个用户)
[root@node1 u01]# su - oracle
[oracle@node1 ~]$
[oracle@node1 ~]$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_rsa):
Created directory '/home/oracle/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_rsa.
Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
The key fingerprint is:
5d:94:12:23:9c:5b:ae:e8:5e:23:fb:ce:65:bc:a6:23 oracle@node1
[oracle@node1 ~]$ cd .ssh/
[oracle@node1 .ssh]$ mv id_rsa.pub authorized_keys
[oracle@node1 .ssh]$ ll
总计 8
-rw-r--r-- 1 oracle oinstall 394 09-27 21:52 authorized_keys
-rw------- 1 oracle oinstall 1675 09-27 21:52 id_rsa
[oracle@node1 .ssh]$ chmod 600 authorized_keys
[oracle@node1 .ssh]$ cd ..
[oracle@node1 ~]$ scp -r .ssh/ 192.168.10.20:/home/oracle
The authenticity of host '192.168.10.20 (192.168.10.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.10.20' (RSA) to the list of known hosts.
oracle@192.168.10.20's password:
id_rsa 100% 1675 1.6KB/s 00:00
authorized_keys 100% 394 0.4KB/s 00:00
known_hosts 100% 395 0.4KB/s 00:00
[oracle@node1 ~]$
[oracle@node1 ~]$ su - grid
口令：
[grid@node1 ~]$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Created directory '/home/grid/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
09:b9:21:44:1e:fc:a1:94:6f:9a:e6:5e:ee:d2:76:e4 grid@node1
[grid@node1 ~]$ cd .ssh/
[grid@node1 .ssh]$ ls
id_rsa id_rsa.pub
[grid@node1 .ssh]$ mv id_rsa.pub authorized_keys
[grid@node1 .ssh]$ chmod 600 authorized_keys
[grid@node1 .ssh]$ cd ..
[grid@node1 ~]$ scp -r .ssh/ 192.168.10.20:/home/grid
The authenticity of host '192.168.10.20 (192.168.10.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.10.20' (RSA) to the list of known hosts.
grid@192.168.10.20's password:
id_rsa 100% 1671 1.6KB/s 00:00
authorized_keys 100% 392 0.4KB/s 00:00
known_hosts 100% 395 0.4KB/s 00:00
[grid@node1 ~]$
测试：
#su - oracle
[oracle@node1 ~]$ ssh node2 date
The authenticity of host 'node2 (192.168.10.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:57:17 CST
[oracle@node1 ~]$ ssh node2priv date
The authenticity of host 'node2priv (192.168.20.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2priv,192.168.20.20' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:57:28 CST
[oracle@node1 ~]$ ssh node1 date
The authenticity of host 'node1 (192.168.10.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1,192.168.10.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:57:45 CST
[oracle@node1 ~]$ ssh node1priv date
The authenticity of host 'node1priv (192.168.20.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1priv,192.168.20.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:58:02 CST
[oracle@node1 ~]$
[oracle@node1 ~]$ ssh node2
[oracle@node2 ~]$ id
uid=502(oracle) gid=501(oinstall) groups=501(oinstall),502(dba),506(asmdba)
[oracle@node2 ~]$ ssh node2 date
The authenticity of host 'node2 (192.168.10.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:58:41 CST
[oracle@node2 ~]$ ssh node2priv date
The authenticity of host 'node2priv (192.168.20.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2priv,192.168.20.20' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:58:49 CST
[oracle@node2 ~]$ ssh node1 date
The authenticity of host 'node1 (192.168.10.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1,192.168.10.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:59:01 CST
[oracle@node2 ~]$ ssh node1priv date
The authenticity of host 'node1priv (192.168.20.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1priv,192.168.20.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:59:12 CST
[oracle@node2 ~]$
[root@node1 /]# su - grid
[grid@node1 ~]$ ssh node1 date
The authenticity of host 'node1 (192.168.10.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1,192.168.10.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:59:53 CST
[grid@node1 ~]$ ssh node1priv date
The authenticity of host 'node1priv (192.168.20.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1priv,192.168.20.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 21:59:59 CST
[grid@node1 ~]$ ssh node2 date
The authenticity of host 'node2 (192.168.10.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 22:00:09 CST
[grid@node1 ~]$ ssh node2priv date
The authenticity of host 'node2priv (192.168.20.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)?
Host key verification failed.
[grid@node1 ~]$ ssh node2priv date
The authenticity of host 'node2priv (192.168.20.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2priv,192.168.20.20' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 22:00:16 CST
[grid@node1 ~]$ ssh node2
[grid@node2 ~]$ ssh node2 date
The authenticity of host 'node2 (192.168.10.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 22:00:29 CST
[grid@node2 ~]$ ssh node2priv date
The authenticity of host 'node2priv (192.168.20.20)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2priv,192.168.20.20' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 22:00:38 CST
[grid@node2 ~]$ ssh node1 date
The authenticity of host 'node1 (192.168.10.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1,192.168.10.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 22:00:49 CST
[grid@node2 ~]$ ssh node1priv date
The authenticity of host 'node1priv (192.168.20.10)' can't be established.
RSA key fingerprint is 95:ed:6d:87:61:00:27:ed:38:17:6c:e9:6c:c3:8a:1d.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1priv,192.168.20.10' (RSA) to the list of known hosts.
2012年 09月 27日 星期四 22:00:58 CST
[grid@node2 ~]$
最后 在每个节点的 oracle用户 grid用户都执行一个命令
$ ssh node1 date && ssh node1priv date && ssh node2 date && ssh node2priv date
$ id
uid=501(grid) gid=501(oinstall) groups=501(oinstall),502(dba),504(asmadmin),506(asmdba),507(asmoper)
最后是这个效果：
[grid@node2 ~]$ ssh node1 date && ssh node1priv date && ssh node2 date && ssh node2priv date
2012年 09月 27日 星期四 22:04:03 CST
2012年 09月 27日 星期四 22:04:03 CST
2012年 09月 27日 星期四 22:04:00 CST
2012年 09月 27日 星期四 22:04:01 CST
[grid@node2 ~]$ su - oracle
口令：
[oracle@node2 ~]$ ssh node1 date && ssh node1priv date && ssh node2 date && ssh node2priv date
2012年 09月 27日 星期四 22:04:14 CST
2012年 09月 27日 星期四 22:04:14 CST
2012年 09月 27日 星期四 22:04:11 CST
2012年 09月 27日 星期四 22:04:12 CST
[oracle@node2 ~]$ ssh node1
[oracle@node1 ~]$ ssh node1 date && ssh node1priv date && ssh node2 date && ssh node2priv date
2012年 09月 27日 星期四 22:04:22 CST
2012年 09月 27日 星期四 22:04:22 CST
2012年 09月 27日 星期四 22:04:19 CST
2012年 09月 27日 星期四 22:04:20 CST
[oracle@node1 ~]$ su - grid
口令：
[grid@node1 ~]$ ssh node1 date && ssh node1priv date && ssh node2 date && ssh node2priv date
2012年 09月 27日 星期四 22:04:45 CST
2012年 09月 27日 星期四 22:04:45 CST
2012年 09月 27日 星期四 22:04:42 CST
2012年 09月 27日 星期四 22:04:42 CST
[grid@node1 ~]$
8、配置远程图形界面管理
可以使用xmanager，也可以使用vnc。对于远程链接跨越互联网的建议用vnc，如果在局域网中我们使用xmanager即可。
Xmanager配置说明：
配置文件位置：
vi /usr/share/gdm/defaults.conf找到下面内容修改配置选项：
[xdmcp]
DisplaysPerHost=10
Enable=true //257行
Port=177 //284行
[security]
AllowRemoteRoot =true //214行
/etc/inittab文件最后一行添加
x:5:respawn:/usr/sbin/gdm
使用命令
# gdm-restart
重启gdm；
查看gdm监听端口开启成功
netstat -nltpu | grep 177
[root@node1 /]# netstat -nltpu | grep 177
udp 0 0 0.0.0.0:177 0.0.0.0:* 3184/gdm-binary
[root@node1 /]#
安装前检测
将软件上传到服务器中的我们之前建好的/u01/software 中并解压
[root@node1 /]# chown –R grid.oinstall /u01/software/
#su -grid
#cd /u01/software/grid
#./runcluvfy.sh stage -pre crsinst -n node1,node2 -fixup -verbose > check.txt
最后查看check.txt文件，如果有错误，可以尝试使用root身份运行/tmp/CVU_11.2.0.1.0_grid/runfixup.sh。最后我们可能看到关于NTP的错误，我们忽略。
二、图形界面开始安装clusterware
[root@node1 ~]# su – grid
[grid@node1 ~]$ cd /u01/software/grid
[grid@node1 grid]$ ls
check1.txt doc response runcluvfy.sh sshsetup welcome.html
check.txt install rpm runInstaller stage
[grid@node1 grid]$ ./runInstaller
选择语言支持
配置集群名称，第二行的“SCAN名称”要和hosts文件里面的scan那项要对应
添加修改节点信息，一定要和hosts文件中的名字对应。在此步骤可以配置ssh互信。因为我们事先已经配置好，这里就不需要修改了。
网络配置
选择磁盘管理方式，我们选择ASM表决盘管理
创建ASM磁盘组
搜索路径
选择需要的盘
设置密码
选择“是”
不使用
使用默认用户即可
设置grid的base和home目录
设置日志目录
检查环境
这项可以忽略
摘要
开始安装
将两个脚本分别在两个节点上以root身份运行
每个脚本等node1执行完了，在去下一个节点执行
执行完成之后点击确定
等待完成，clusterware安装成功。
三、安装数据库软件
#su - oracle
$cd /u01/software/database
$ cd database/
$ ls
doc install response rpm runInstaller sshsetup stage welcome.html
$ ./runInstaller
关闭电子邮件接收
选择是
仅安装数据库软件
选择RAC数据库安装
选择语言支持
企业版安装
选择安装目录
选择操作组
点击完成，直到安装结束。
建库（dbca）
以oracle用户身份执行dbca
点击完成直到结束。
