电赛画直线画圆

【文件属性】：

文件名称：电赛画直线画圆

文件大小：87KB

文件格式：ZIP

更新时间：2016-09-02 14:41:22

画圆直线循迹

画圆画直线程序功能：扫描4X4键盘并将键值在1602液晶上显示 ------------------------------------------------ ------------------------------------------------ 测试说明：按动K1~K16按键，观察液晶显示 ************************************************/ #include #include "math.h" #include "Keypad.h" #include "Keypad.c" #include "cry1602.h" #include "cry1602.c" #include "huazhixian.c" #include "suanfa.h" #include "yuan.h" #include "yuan.c" #include "dianji.h" #include "dianji.c" #include "xunji.h" #include "xunji.c" #include "huaxin.h" #include "huaxin1.c" #include "dianjizhixian.h" #include "dianjizhixian.c" //引用外部变量的声明 extern unsigned char key_val; extern unsigned char key_Flag; uchar *kaiji0={">>> WELCOME! <<<"}; uchar *kaiji1={"LOADDOWNING....."}; uchar *table0={"1.Line 2.xinxin"}; uchar *table1={"3.Circu 4.Follow"}; uchar *table3={" Draw a Line "}; uchar *table4={"Draw Circularity"}; uchar *table5={"Follow the Line "}; uchar *table8={"( cm, cm) "}; uchar *table9={" ENTER to Begin "}; uchar *table10={"Executing .... x"}; uchar *table11={"LOVEMD perform. "}; uchar *table12={"(25,25)-(50,25) "}; uchar *table13={"(50,50)-(25,50) "}; uchar *wrong={"Wrong Coordinate"}; uchar *again={"Input Agian! "}; /********************主函数********************/

【文件预览】：
三个传感器 - 副本
----1602xian1()
--------Keypad.c(3KB)
--------main.c(8KB)
--------1602xian.ewd(20KB)
--------settings()
--------cry1602.c(6KB)
--------dianji.c(1KB)
--------yuan.c(3KB)
--------1602xian.ewp(49KB)
--------suanfa.h(789B)
--------dianjizhixian.h(30B)
--------xunji.h(151B)
--------dianji.h(67B)
--------Debug()
--------cry1602.h(512B)
--------dianjizhixian.c(991B)
--------huazhixian.c(5KB)
--------yuan.h(133B)
--------1602xian.dep(4KB)
--------Keypad.h(86B)
--------1602xian.eww(162B)
--------huaxin.h(193B)
--------huaxin1.c(3KB)
--------path.txt(0B)
--------xunji.c(4KB)