文件名称：树莓派LCD驱动
文件大小：163KB
文件格式：GZ
更新时间：2022-03-18 08:43:10
树莓派驱动
树莓派LCD驱动/2.8/3.2/3.5/3.97/4.3/5/7等！ You can focus on the following GitHub web site, for the latest lcd drivers: https://github.com/goodtft/LCD-show =============================================================================================================== "LCD-show-170315.tar.gz" just for Raspbian (Release date:2017-03-02) or later, DO NOT use it for the Raspbian version before 2017-03-02. ================================================================================================================ "LCD-show-160701.tar.gz" support Raspbian version before Raspbian-2017-02-16,such as(2017-02-16,2017-01-11, 2016-11-25,2016-09-23,2016-05-27,2016-05-10,2016-03-18,or earlier). And This Driver also tesed on "kali-2.1.2" ,"ubuntu-mate-16.04-beta2" ================================================================================================================ How to Install: 1.)Step1, Install Raspbian official mirror a)Download Raspbian official mirror: https://www.raspberrypi.org/downloads/ b)Use“SDFormatter.exe”to Format your TF Card c)Use“Win32DiskImager.exe” Burning mirror to TF Card 2.) Step2, Clone my repo onto your pi git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ 3.)Step3, According to your LCD's type, excute: In case of 2.8" LCD sudo ./LCD28-show In case of 3.2" LCD sudo ./LCD32-show In case of 3.5" LCD sudo ./LCD35-show In case of 3.97" LCD sudo ./LCD397-show In case of 4.3" LCD sudo ./LCD43-show In case of 5" LCD sudo ./LCD5-show In case of 7inch(B)-800X480 RPI LCD sudo ./LCD7B-show In case of 7inch(C)-1024X600 RPI LCD sudo ./LCD7C-show If you need to switch back to the traditional HDMI display sudo ./LCD-hdmi Wait a few minutes,the system will restart automaticall , enjoy with your LCD.
【文件预览】：
usr
----bcm2709-rpi-2-b.dtb(15KB)
----99-calibration.conf-43(204B)
----modules-HDMI(923B)
----cmdline.txt(168B)
----tft9341-overlay.dtb(2KB)
----99-fbturbo.conf-HDMI(609B)
----99-calibration.conf-32(204B)
----99-calibration.conf-397(204B)
----99-fbturbo.conf(609B)
----99-calibration.conf-35(204B)
----qddpi24.dtb(779B)
----99-calibration.conf-28(204B)
----99-calibration.conf-5(204B)
----99-calibration.conf-3508(204B)
----tft35a-overlay.dtb(3KB)
----bcm2710-rpi-3-b.dtb(16KB)
----inittab(2KB)
MPI3508_960_640-show
LCD7C-show
xinput-calibrator_0.7.5-1_armhf.deb
LCD5-show
LCD397-show
MPI3508_720_480-show
boot
----config-nomal.txt(2KB)
----config-35.txt(2KB)
----config-43.txt(2KB)
----config-7C-1024x600.txt(2KB)
----config-397.txt(2KB)
----config-32.txt(2KB)
----config-35DPI.txt(2KB)
----config-35-600X400.txt(2KB)
----config-35-960X640.txt(2KB)
----config-5.txt(2KB)
----config-35-720X480.txt(2KB)
----config-35-810X540.txt(2KB)
----config-7B-800x480.txt(2KB)
----config-28.txt(2KB)
----config-35-480X320.txt(2KB)
LCD-hdmi
MPI3510-show
xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
LCD32-show
MPI3508_600_400-show
README.md
MPI3508_480_320-show
LCD35-show
LCD28-show
LCD43-show
MPI3508_810_540-show
LCD7B-show