iconv VS2008移植工程

【文件属性】：
文件名称：iconv VS2008移植工程
文件大小：2.3MB
文件格式：RAR
更新时间：2014-07-19 03:06:59
iconv vs2008 VC libconv在windows系统的移植，编译，测试工程代码 确实有需要的请下载使用。以下是测试代码 #include //include #include #include //#include //include #include int code_convert(char *from_charset,char *to_charset,char *inbuf,int inlen,char *outbuf,int outlen) { iconv_t cd; char **pin = &inbuf; char **pout = &outbuf; size_t iconv_ret; cd = iconv_open(to_charset,from_charset); if (cd==(iconv_t)-1) { perror("iconv_open():"); exit(0); } memset(outbuf,0,outlen); iconv_ret = iconv(cd,pin,&inlen,pout,&outlen); if (iconv_ret == (size_t)-1) { perror("iconv():"); exit(0); } iconv_close(cd); return 0; } int u2g(char *inbuf,int inlen,char *outbuf,int outlen) //UNICODE码转为GB2312码 { return code_convert("utf-8","gb2312",inbuf,inlen,outbuf,outlen); } int g2u(char *inbuf,size_t inlen,char *outbuf,size_t outlen) //GB2312码转为UNICODE码 { return code_convert("gb2312","utf-8",inbuf,inlen,outbuf,outlen); } /* 这是一个iconv的测试例程： “纵海杯”东南大学第三届嵌入式系统设计邀请赛 */ int main(void) { unsigned char in_utf8[] = {0x20,0xe8,0xbf,0x99,0xe6,0x98,0xaf,0xe4,0xb8,0x80,0xe4,0xb8,0xaa,0x69,0x63,0x6f, 0x6e,0x76,0xe7,0x9a,0x84,0xe6,0xb5,0x8b,0xe8,0xaf,0x95,0xe4,0xbe,0x8b,0xe7,0xa8, 0x8b,0xef,0xbc,0x9a,0x0a,0xe2,0x80,0x9c,0xe7,0xba,0xb5,0xe6,0xb5,0xb7,0xe6,0x9d, 0xaf,0xe2,0x80,0x9d,0xe4,0xb8,0x9c,0xe5,0x8d,0x97,0xe5,0xa4,0xa7,0xe5,0xad,0xa6, 0xe7,0xac,0xac,0xe4,0xb8,0x89,0xe5,0xb1,0x8a,0xe5,0xb5,0x8c,0xe5,0x85,0xa5,0xe5, 0xbc,0x8f,0xe7,0xb3,0xbb,0xe7,0xbb,0x9f,0xe8,0xae,0xbe,0xe8,0xae,0xa1,0xe9,0x82, 0x80,0xe8,0xaf,0xb7,0xe8,0xb5,0x9b,0x00}; //UTF-8编码 char in_gb2312[] =" 这是一个iconv的测试例程：\n\ “纵海杯”东南大学第三届嵌入式系统设计邀请赛"; //GB2312编码 char out[256]; int rc; printf("\r\n------iconv test------\r\n"); printf("\r\n---Start UTF8 to GB2312 convert...\r\n"); rc = u2g(in_utf8,strlen(in_utf8),out,256); printf("%s\n",out); rc = strcmp(in_gb2312,out); if(rc==0) { printf("---End UTF8 to GB2312 convert OK\r\n"); } else { printf("---End UTF8 to GB2312 convert FAIL\r\n"); } printf("\r\n---Start GB2312 to UTF8 convert...\n"); rc = g2u(in_gb2312,strlen(in_gb2312),out,256); printf("%s\n",out); rc = strcmp(in_utf8,out); if(rc==0) { printf("---End GB2312 to UTF8 convert OK\r\n"); } else { printf("---End GB2312 to UTF8 convert FAIL\r\n"); } printf("\r\n------iconv test over------\r\n"); system("pause");; }