文件名称：创建VLAN-CCNA中文版PPT
文件大小：10.75MB
文件格式：PPT
更新时间：2024-05-15 11:39:33
CCNA
1.创建VLAN sw(config)#vlan 2 Sw(config)#name VLAN2 2.将端口加入VLAN sw(config-if)#switchport mode access sw(config-if)#switchport access vlan 2 3.检查的命令 Switch#show vlan 在单台交换机上配置VLAN * Notes: All switches in a VTP domain must run the same VTP version. The password entered with a domain name should be the same for all switches in the domain. If you configure a VTP password, the management domain will not function properly if you do not assign the management domain password to each switch in the domain. A VTP version 2-capable switch can operate in the same VTP domain as a switch running VTP version 1, provided version 2 is disabled on the version 2-capable switch (version 2 is disabled by default). Do not enable VTP version 2 on a switch unless all of the switches in the same VTP domain are version 2-capable. When you enable version 2 on a switch, all of the version 2-capable switches in the domain must have version 2 enabled. If there is a version 1-only switch, it will not exchange VTP information with switches with version 2 enabled. If there are Token Ring networks in your environment, you must enable VTP version 2 for Token Ring VLAN switching to function properly. Enabling or disabling VTP pruning on a VTP server enables or disables VTP pruning for the entire management domain. In the lab, all the switches are set to VTP transparent mode.