文件名称：HP VxWorks U盘启动盘制作工具HPUSBF.EXE.zip
文件大小：754KB
文件格式：ZIP
更新时间：2022-09-24 13:16:21
U盘相关工具
软件介绍: vxworks可启动的U盘：在WinXP系统上的USB插槽中插入的U盘步骤：Step 1: Format the usb stick with HP's DriveKey utility.( Included in the zip file, but its also available from HP's web site).Step 2: C:\Download\DamascusBoard>vxsysusb E: -ownriskvxsysusb Progress: Original Bootloader and Disk Parameters read from E:vxsysusb Progress: Original Disk parameters checkedvxsysusb Progress: Bootloader createdvxsysusb Progress: Bootloader written to Disk E:vxsysusb Sucess: Done.Step 3:C:\Download\DamascusBoard> copy bootrom.bin E:bootrom.sysStep 4: Copy vxWorks E:\vxWorksStep 5: Take out the USB stick from the windows host machine Step 6: Insert this USB stick on the Damascus Board's usb slot.Step 7: Power Reset or Power recycle to the Damascus Board Step 8: Enter the appropriate set of keys to enter the BIOS of the board.Change the bios settings / bios priority to boot from "USB stick".i.e. after this change, the USB stick should be either the first boot deviceor it should be the only boot device ( preferably).Step 9: Save these changes and reboot the Damascus Board ( allowing it boot from USB stick).Step 10: Now, observe the Damascus Board's serial port console window ( such as tera term)for booting activity. When it boots you would see the vxworks boot prompt.Step 11: Enter the correct boot parameters.
【文件预览】：
hp
----USB_Drive_procedure.txt(3KB)
----vxsysusb.exe(180KB)
----HPUSBF.EXE(440KB)
----bootrom.sys(350KB)