RHEL6.1上安装parallels extreme workstation 6，没有intel vt－d选项，而在同样的机器上，运行windows 7安装parallels，就有intel vt-d选项
查看dmesg：
Intel-IOMMU: enabled
ioatdma: Intel(R) QuickData Technology Driver 4.00
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 43
ioatdma 0000:00:16.0: setting latency timer to 64
ioatdma 0000:00:16.0: channel error register unreachable
ioatdma 0000:00:16.0: channel enumeration error
ioatdma 0000:00:16.0: Intel(R) I/OAT DMA Engine init failed
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.1: PCI->APIC IRQ transform: INT B -> IRQ 44
ioatdma 0000:00:16.1: setting latency timer to 64
ioatdma 0000:00:16.1: channel error register unreachable
ioatdma 0000:00:16.1: channel enumeration error
ioatdma 0000:00:16.1: Intel(R) I/OAT DMA Engine init failed
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.2: PCI->APIC IRQ transform: INT C -> IRQ 45
ioatdma 0000:00:16.2: setting latency timer to 64
ioatdma 0000:00:16.2: channel error register unreachable
ioatdma 0000:00:16.2: channel enumeration error
ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine init failed
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.3: PCI->APIC IRQ transform: INT D -> IRQ 46
ioatdma 0000:00:16.3: setting latency timer to 64
ioatdma 0000:00:16.3: channel error register unreachable
ioatdma 0000:00:16.3: channel enumeration error
ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.4: PCI->APIC IRQ transform: INT A -> IRQ 43
ioatdma 0000:00:16.4: setting latency timer to 64
ioatdma 0000:00:16.4: channel error register unreachable
ioatdma 0000:00:16.4: channel enumeration error
ioatdma 0000:00:16.4: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.5: PCI->APIC IRQ transform: INT B -> IRQ 44
ioatdma 0000:00:16.5: setting latency timer to 64
ioatdma 0000:00:16.5: channel error register unreachable
ioatdma 0000:00:16.5: channel enumeration error
ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.6: PCI->APIC IRQ transform: INT C -> IRQ 45
ioatdma 0000:00:16.6: setting latency timer to 64
ioatdma 0000:00:16.6: channel error register unreachable
ioatdma 0000:00:16.6: channel enumeration error
ioatdma 0000:00:16.6: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.7: PCI->APIC IRQ transform: INT D -> IRQ 46
ioatdma 0000:00:16.7: setting latency timer to 64
ioatdma 0000:00:16.7: channel error register unreachable
ioatdma 0000:00:16.7: channel enumeration error
ioatdma 0000:00:16.7: Intel(R) I/OAT DMA Engine init failed
/drv/ HypVtd.c:3684 [vtdProcessDmarTable] Can't find DMAR table!
问题可能出在DMAR上，如何解决？
附dmesg完整信息：
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-131.0.15.el6.x86_64 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Tue May 10 15:42:40 EDT 2011
Command line: ro root=UUID=ac375b49-fe31-4773-a2ac-19142731ac05 rd_MD_UUID=4dd85ee1:ffe536c5:08f19243:05c92d74 rd_MD_UUID=e642c519:40f04bd6:b496c2d7:9a0581e5 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us nomodeset rhgb quiet intel_iommu=on
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf78e000 - 00000000bf790000 type 9
BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000640000000 (usable)
DMI present.
SMBIOS version 2.6 @ 0xFAE90
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x640000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-D3FFF uncachable
D4000-D7FFF write-protect
D8000-DBFFF uncachable
DC000-DFFFF write-protect
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FC00000000 write-back
1 base 0400000000 mask FE00000000 write-back
2 base 0600000000 mask FFC0000000 write-back
3 base 00C0000000 mask FFC0000000 uncachable
4 base 00BF800000 mask FFFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 8GB, type WB
reg 2, base: 24GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 24568M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 8GB, type WB
reg 6, base: 24GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 0080000000 page 1G
0080000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000640000000
0100000000 - 0640000000 page 1G
kernel direct mapping tables up to 640000000 @ 12000-13000
RAMDISK: 7f168000 - 7fffecb2
ACPI: RSDP 0000000000095810 00024 (v02 ACPIAM)
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:543 __early_ioremap+0xe0/0x248() (Not tainted)
Hardware name: X8DTG-D
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.32-131.0.15.el6.x86_64 #1
Call Trace:
[<ffffffff81067137>] ? warn_slowpath_common+0x87/0xc0
[<ffffffff8106718a>] ? warn_slowpath_null+0x1a/0x20
[<ffffffff81bd8055>] ? __early_ioremap+0xe0/0x248
[<ffffffff81bd8356>] ? early_iounmap+0x16f/0x1bf
[<ffffffff81bd81e5>] ? early_ioremap+0x13/0x15
[<ffffffff81bcadfd>] ? __acpi_map_table+0x17/0x19
[<ffffffff814c79c1>] ? acpi_os_map_memory+0x1e/0x20
[<ffffffff81bf0ab4>] ? acpi_tb_parse_root_table+0xae/0x2d3
[<ffffffff814c79a1>] ? acpi_os_unmap_memory+0x1e/0x20
[<ffffffff812de3fa>] ? acpi_find_root_pointer+0xbf/0x15d
[<ffffffff81bf0a04>] ? acpi_initialize_tables+0x57/0x59
[<ffffffff81beee60>] ? acpi_table_init+0x1b/0x99
[<ffffffff81bca73a>] ? acpi_boot_table_init+0x35/0xda
[<ffffffff81bc34bb>] ? setup_arch+0x888/0xad0
[<ffffffff814dad34>] ? printk+0x41/0x45
[<ffffffff81bbdbe7>] ? start_kernel+0xdc/0x429
[<ffffffff81bbd33a>] ? x86_64_start_reservations+0x125/0x129
[<ffffffff81bbd438>] ? x86_64_start_kernel+0xfa/0x109
---[ end trace a7919e7f17c0a725 ]---
ACPI: ÷å÷å 0000000000095733 1AC51AF7 (v197 Å?ÅÚ2Ú 2Ú2Ú2%T% 25542554 T£·£ A3B7A3B7)
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:543 __early_ioremap+0xe0/0x248() (Tainted: G W ---------------- )
Hardware name: X8DTG-D
Modules linked in:
Pid: 0, comm: swapper Tainted: G W ---------------- 2.6.32-131.0.15.el6.x86_64 #1
Call Trace:
[<ffffffff81067137>] ? warn_slowpath_common+0x87/0xc0
[<ffffffff8106718a>] ? warn_slowpath_null+0x1a/0x20
[<ffffffff81bd8055>] ? __early_ioremap+0xe0/0x248
[<ffffffff81bd8356>] ? early_iounmap+0x16f/0x1bf
[<ffffffff812ddada>] ? acpi_tb_print_table_header+0x1e0/0x1f6
[<ffffffff81bd81e5>] ? early_ioremap+0x13/0x15
[<ffffffff81bcadfd>] ? __acpi_map_table+0x17/0x19
[<ffffffff814c79c1>] ? acpi_os_map_memory+0x1e/0x20
[<ffffffff81bf0b69>] ? acpi_tb_parse_root_table+0x163/0x2d3
[<ffffffff814c79a1>] ? acpi_os_unmap_memory+0x1e/0x20
[<ffffffff812de3fa>] ? acpi_find_root_pointer+0xbf/0x15d
[<ffffffff81bf0a04>] ? acpi_initialize_tables+0x57/0x59
[<ffffffff81beee60>] ? acpi_table_init+0x1b/0x99
[<ffffffff81bca73a>] ? acpi_boot_table_init+0x35/0xda
[<ffffffff81bc34bb>] ? setup_arch+0x888/0xad0
[<ffffffff814dad34>] ? printk+0x41/0x45
[<ffffffff81bbdbe7>] ? start_kernel+0xdc/0x429
[<ffffffff81bbd33a>] ? x86_64_start_reservations+0x125/0x129
[<ffffffff81bbd438>] ? x86_64_start_kernel+0xfa/0x109
---[ end trace a7919e7f17c0a726 ]---
No NUMA configuration found
Faking a node at 0000000000000000-0000000640000000
Bootmem setup node 0 0000000000000000-0000000640000000
NODE_DATA [0000000000012000 - 0000000000045fff]
bootmap [0000000000100000 - 00000000001c7fff] pages c8
(7 early reservations) ==> bootmem [0000000000 - 0640000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001f474e4] TEXT DATA BSS ==> [0001000000 - 0001f474e4]
#3 [007f168000 - 007fffecb2] RAMDISK ==> [007f168000 - 007fffecb2]
#4 [0000095800 - 0000100000] BIOS reserved ==> [0000095800 - 0000100000]
#5 [0001f48000 - 0001f4823b] BRK ==> [0001f48000 - 0001f4823b]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880028600000-ffff88003d5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00640000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x00000095
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x00640000
On node 0 totalpages: 6289157
DMA zone: 56 pages used for memmap
DMA zone: 111 pages reserved
DMA zone: 3806 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 75264 pages used for memmap
Normal zone: 5429760 pages, LIFO batch:31
SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
Intel MultiProcessor Specification v1.1
MPTABLE: OEM ID: INTEL
MPTABLE: Product ID: TYLERSBURG
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #2
Processor #18
Processor #20
Processor #32
Processor #34
Processor #50
Processor #52
I/O APIC #4 Version 32 at 0xFEC00000.
I/O APIC #6 Version 32 at 0xFEC8A000.
Processors: 8
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000095000 - 0000000000096000
PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000
PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000
PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92504 r8192 d22184 u262144
pcpu-alloc: s92504 r8192 d22184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6199446
Policy zone: Normal
Kernel command line: ro root=UUID=ac375b49-fe31-4773-a2ac-19142731ac05 rd_MD_UUID=4dd85ee1:ffe536c5:08f19243:05c92d74 rd_MD_UUID=e642c519:40f04bd6:b496c2d7:9a0581e5 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us nomodeset rhgb quiet intel_iommu=on
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 24714456k/26214400k available (5014k kernel code, 1057772k absent, 442172k reserved, 6906k data, 1232k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:880
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 251658240 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2400.127 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.25 BogoMIPS (lpj=2400127)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20700 entries in 82 pages
Setting APIC routing to flat
ExtINT not setup in hardware but reported by MP table
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (38395.29 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xfec8a000-0xfec8afff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xfbef8000-0xfbefbfff]
pci 0000:00:16.1: reg 10 64bit mmio: [0xfbef4000-0xfbef7fff]
pci 0000:00:16.2: reg 10 64bit mmio: [0xfbef0000-0xfbef3fff]
pci 0000:00:16.3: reg 10 64bit mmio: [0xfbeec000-0xfbeeffff]
pci 0000:00:16.4: reg 10 64bit mmio: [0xfbee8000-0xfbeebfff]
pci 0000:00:16.5: reg 10 64bit mmio: [0xfbee4000-0xfbee7fff]
pci 0000:00:16.6: reg 10 64bit mmio: [0xfbee0000-0xfbee3fff]
pci 0000:00:16.7: reg 10 64bit mmio: [0xfbedc000-0xfbedffff]
pci 0000:00:1a.0: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:1a.1: reg 20 io port: [0xc880-0xc89f]
pci 0000:00:1a.2: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbeda000-0xfbeda3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f]
pci 0000:00:1d.1: reg 20 io port: [0xc400-0xc41f]
pci 0000:00:1d.2: reg 20 io port: [0xc080-0xc09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbed8000-0xfbed83ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0xb480-0xb487]
pci 0000:00:1f.2: reg 14 io port: [0xc000-0xc003]
pci 0000:00:1f.2: reg 18 io port: [0xbc00-0xbc07]
pci 0000:00:1f.2: reg 1c io port: [0xb880-0xb883]
pci 0000:00:1f.2: reg 20 io port: [0xb800-0xb81f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbed6000-0xfbed67ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbed4000-0xfbed40ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:02:00.0: reg 10 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xd4000000-0xd7ffffff]
pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xf7f80000-0xf7ffffff]
pci 0000:02:00.1: reg 10 32bit mmio: [0xf7f7c000-0xf7f7ffff]
pci 0000:00:03.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:03.0: bridge 32bit mmio: [0xf7f00000-0xf9ffffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xd4000000-0xdfffffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0xfbde0000-0xfbdfffff]
pci 0000:04:00.0: reg 14 32bit mmio: [0xfbdc0000-0xfbddffff]
pci 0000:04:00.0: reg 18 io port: [0xec00-0xec1f]
pci 0000:04:00.0: reg 1c 32bit mmio: [0xfbd9c000-0xfbd9ffff]
pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfbda0000-0xfbdbffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10 32bit mmio: [0xfbd60000-0xfbd7ffff]
pci 0000:04:00.1: reg 14 32bit mmio: [0xfbd40000-0xfbd5ffff]
pci 0000:04:00.1: reg 18 io port: [0xe880-0xe89f]
pci 0000:04:00.1: reg 1c 32bit mmio: [0xfbd1c000-0xfbd1ffff]
pci 0000:04:00.1: reg 30 32bit mmio pref: [0xfbd20000-0xfbd3ffff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:05:01.0: reg 10 32bit mmio pref: [0xf6000000-0xf6ffffff]
pci 0000:05:01.0: reg 14 32bit mmio: [0xfaffc000-0xfaffffff]
pci 0000:05:01.0: reg 18 32bit mmio: [0xfb000000-0xfb7fffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfaf00000-0xfb7fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf6000000-0xf6ffffff]
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:05:01.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3a16]
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI: disabled
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: bridge window [0xd000-0xdfff]
pci 0000:00:03.0: bridge window [0xf7f00000-0xf9ffffff]
pci 0000:00:03.0: bridge window [0xd4000000-0xdfffffff]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: bridge window [0xe000-0xefff]
pci 0000:00:1c.0: bridge window [0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: bridge window [0xc0000000-0xc01fffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [0xfaf00000-0xfb7fffff]
pci 0000:00:1e.0: bridge window [0xf6000000-0xf6ffffff]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xf7f00000-0xf9ffffff]
pci_bus 0000:02: resource 2 pref mem [0xd4000000-0xdfffffff]
pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
pci_bus 0000:04: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 pref mem [0xc0000000-0xc01fffff]
pci_bus 0000:05: resource 1 mem: [0xfaf00000-0xfb7fffff]
pci_bus 0000:05: resource 2 pref mem [0xf6000000-0xf6ffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:05:01.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14939k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1323255173.647:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key C9F0DFBFCE81A817
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 48 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pciee94: HPC vendor_id 8086 device_id 3a40 ss_vid 0 ss_did 0
pciehp 0000:00:1c.0:pciee94: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbeda000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbed8000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI->APIC IRQ transform: INT D -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-131.0.15.el6.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2011-12-07 10:52:56 UTC (1323255176)
Initalizing network drop monitor service
Freeing unused kernel memory: 1232k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1112k freed
Freeing unused kernel memory: 1796k freed
dracut: dracut-004-53.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6100 irq 49
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 49
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 49
ata4: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6280 irq 49
ata5: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6300 irq 49
ata6: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6380 irq 49
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=046b, idProduct=ff10
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Virtual Keyboard and Mouse
usb 4-1: Manufacturer: American Megatrends Inc.
usb 4-1: SerialNumber: serial
usb 4-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1
generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.1-1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input2
generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.1-1/input1
usb 6-2: new full speed USB device using uhci_hcd and address 2
usb 6-2: New USB device found, idVendor=05e3, idProduct=0606
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB Hub 2.0
usb 6-2: Manufacturer: ALCOR
usb 6-2: configuration #1 chosen from 1 choice
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
usb 6-2.1: new low speed USB device using uhci_hcd and address 3
usb 6-2.1: New USB device found, idVendor=093a, idProduct=2510
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.1: Product: USB OPTICAL MOUSE
usb 6-2.1: Manufacturer: PIXART
usb 6-2.1: configuration #1 chosen from 1 choice
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input3
generic-usb 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-2.1/input0
usb 6-2.4: new low speed USB device using uhci_hcd and address 4
usb 6-2.4: New USB device found, idVendor=04d9, idProduct=1603
usb 6-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.4: Product: USB Keyboard
usb 6-2.4: Manufacturer:
usb 6-2.4: configuration #1 chosen from 1 choice
input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input4
generic-usb 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-2.4/input0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.1/input/input5
generic-usb 0003:04D9:1603.0005: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-2.4/input1
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sda:
sdc: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
sda1 sda2 sda3 sda4 < unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
>
sd 0:0:0:0: [sda] Attached SCSI disk
dracut: Autoassembling MD Raid
md: md0 stopped.
md: bind<sdc>
md: bind<sdb>
md: bind<sda>
dracut: mdadm: Container /dev/md0 has been assembled with 3 drives
md: md127 stopped.
md: bind<sdc>
md: bind<sdb>
md: bind<sda>
md: raid0 personality registered for level 0
bio: create slab <bio-1> at 1
md/raid0:md127: looking at sda
md/raid0:md127: comparing sda(976768000) with sda(976768000)
md/raid0:md127: END
md/raid0:md127: ==> UNIQUE
md/raid0:md127: 1 zones
md/raid0:md127: looking at sdb
md/raid0:md127: comparing sdb(976768000) with sda(976768000)
md/raid0:md127: EQUAL
md/raid0:md127: looking at sdc
md/raid0:md127: comparing sdc(976768000) with sda(976768000)
md/raid0:md127: EQUAL
md/raid0:md127: FINAL 1 zones
md/raid0:md127: done.
md/raid0:md127: md_size is 2930302976 sectors.
******* md127 configuration *********
zone0=[sda/sdb/sdc/]
zone offset=0kb device offset=0kb size=1465152000kb
**********************************
md127: detected capacity change from 0 to 1500315123712
dracut: mdadm: Started /dev/md127 with 3 devices
md127: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
EXT4-fs (md127p7): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/md127p7
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1323255180.872:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: æ æ³å 蜜çç¥ïŒ 没æé£äžªæ件æç®åœ
dracut: Switching root
prl_hypervisor: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
/drv/ HypVtx.c:186 CPU is Intel
/drv/ HypLowCache.c:193 Low cache initialized (0 kB for 0 VMs on 24153 MB)
/drv/ HypApic.c:224 Host APIC phy 0xFEE00000 lin 0xffffc90003d92000 ver 0x15
/drv/ HypVtd.c:3939 [vtdInit]
/drv/ HypAcpi.c:162 map: addr = 0x95800, size = 1024
/drv/ HypAcpi.c:338 [_acpiFindTableBySig] Can't map RSDT/XSDT table!
/drv/ HypVtd.c:3684 [vtdProcessDmarTable] Can't find DMAR table!
/drv/ HypVtd.c:3978 [vtdInit] No VT-d hardware
/drv/ lin_ipi_driver.c:95 Interrupt 13 success.
/drv/ HypIoApic.c:49 Host index register = 42
/drv/ HypModule.c:183 Parallels IPI irq = 13 ipi = 61(0x3d)
/drv/ lin_timer.c:128 Using timer System
/drv/ HypModule.c:193 Parallels Hypervisor 6.0.13852.680648 loaded.
readahead: starting
PVTD: 6.0.13852.680648 loaded.
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 May 10 2011
md: export_rdev(sdc)
md: export_rdev(sdb)
md: export_rdev(sda)
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 43
ioatdma 0000:00:16.0: setting latency timer to 64
ioatdma 0000:00:16.0: channel error register unreachable
ioatdma 0000:00:16.0: channel enumeration error
ioatdma 0000:00:16.0: Intel(R) I/OAT DMA Engine init failed
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.1: PCI->APIC IRQ transform: INT B -> IRQ 44
ioatdma 0000:00:16.1: setting latency timer to 64
ioatdma 0000:00:16.1: channel error register unreachable
ioatdma 0000:00:16.1: channel enumeration error
ioatdma 0000:00:16.1: Intel(R) I/OAT DMA Engine init failed
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.2: PCI->APIC IRQ transform: INT C -> IRQ 45
ioatdma 0000:00:16.2: setting latency timer to 64
ioatdma 0000:00:16.2: channel error register unreachable
ioatdma 0000:00:16.2: channel enumeration error
ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine init failed
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.3: PCI->APIC IRQ transform: INT D -> IRQ 46
ioatdma 0000:00:16.3: setting latency timer to 64
ioatdma 0000:00:16.3: channel error register unreachable
ioatdma 0000:00:16.3: channel enumeration error
ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.4: PCI->APIC IRQ transform: INT A -> IRQ 43
ioatdma 0000:00:16.4: setting latency timer to 64
ioatdma 0000:00:16.4: channel error register unreachable
ioatdma 0000:00:16.4: channel enumeration error
ioatdma 0000:00:16.4: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.5: PCI->APIC IRQ transform: INT B -> IRQ 44
ioatdma 0000:00:16.5: setting latency timer to 64
ioatdma 0000:00:16.5: channel error register unreachable
ioatdma 0000:00:16.5: channel enumeration error
ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.6: PCI->APIC IRQ transform: INT C -> IRQ 45
ioatdma 0000:00:16.6: setting latency timer to 64
ioatdma 0000:00:16.6: channel error register unreachable
ioatdma 0000:00:16.6: channel enumeration error
ioatdma 0000:00:16.6: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:16.7: PCI->APIC IRQ transform: INT D -> IRQ 46
ioatdma 0000:00:16.7: setting latency timer to 64
ioatdma 0000:00:16.7: channel error register unreachable
ioatdma 0000:00:16.7: channel enumeration error
ioatdma 0000:00:16.7: Intel(R) I/OAT DMA Engine init failed
Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
Copyright (c) 2007-2011 Intel Corporation.
igb 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
igb 0000:04:00.0: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 50 for MSI/MSI-X
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 51 for MSI/MSI-X
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 55 for MSI/MSI-X
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.0: irq 58 for MSI/MSI-X
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:22:e6:60
igb 0000:04:00.0: eth0: PBA No: 0010FF-0FF
igb 0000:04:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:04:00.1: PCI->APIC IRQ transform: INT B -> IRQ 17
igb 0000:04:00.1: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
igb 0000:04:00.1: irq 67 for MSI/MSI-X
igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:22:e6:61
igb 0000:04:00.1: eth1: PBA No: 0010FF-0FF
igb 0000:04:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 18
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
HDA Intel 0000:02:00.1: PCI->APIC IRQ transform: INT B -> IRQ 17
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:02:00.1: setting latency timer to 64
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
EXT4-fs (md127p9): mounted filesystem with ordered data mode
Adding 5119864k swap on /dev/md127p8. Priority:-1 extents:1 across:5119864k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
8021q: adding VLAN 0 to HW filter on device eth0
8021q: adding VLAN 0 to HW filter on device eth1
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.2 (Mar 28, 2011)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
usbcore: registered new interface driver prl_usb_connect
device vnic0 entered promiscuous mode
device vnic1 entered promiscuous mode
/drv/ HypIoctls.c:771 Ioctl VT-d status: 0
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
Ebtables v2.0 registered
lo: Disabled Privacy Extensions
libfcoe_device_notification: NETDEV_UNREGISTER lo
eth1: no IPv6 routers present
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
vnic0: no IPv6 routers present
vnic1: no IPv6 routers present
fuse init (API version 7.13)
device eth1 entered promiscuous mode
/drv/ HypHPC.c:217 Hyperswitch[0]. pBuf=ffffc9000403d000,piDbgFunc=ffffc9000403d096
/mon/ Current CPU features : uMaxCount=11 uMaxExtCount=0x80000008
/mon/ Current CPU features : 0xbfebfbff,0x029ee3ff,0x00000001,0x2c100800,0x00000100,0x00003028
/mon/ Current CPU features MASK: 0x0f8bfbff,0x02982203,0x00000001,0x20100800,0x00000100,0x00000000,0xfffff800
/mon/ VPID base for this VM is 0x1
/mon/ DMM size = 4530917 MB
/mon/ DMM size = 4530917 MB
/mon/ [Init] Mon (fffff00000000000,92 mb) (bin=7 mb, 2 vcpu, 4128 mb swap)
/mon/ [Init] frame (00000000e8000000..00000000eac00000), lowMad (00000000ea000000..00000000ea200000) stubframe (00000000e8000000..00000000ea000000), re(00000000ea400000..00000000eac00000)
/mon/ [MonBufGetTotalVmmPageCount] total page count=23499
/drv/ HypIoctls.c:662 Parallels hypervisor inited (cpus=8 hvt=VTX hvt status=Enabled vtd=NO phy=PAE lin=x64 mem=24153)
/mon/ [rvi] Forcibly turning RVI off
/mon/ VMX-preemption timer: rate=18750000 Hz (X=7), period=53333 picosec
/mon/ [ept] EPT started up (EPTP is edb0401e)
/mon/ [LoadMonitor] Monitor started( ipi vector=61 )
/drv/ HypVMManager.c:272 Monitor quited successfully
device eth1 left promiscuous mode