一、安装
yum -y install subversion
二、建立版本库目录
mkdir /var/svn/svnrepos
三、创建svn版本库
svnadmin create /var/svn/svnrepos/versionrepo
四、进入目录，有以下文件
进入config目录，可以看到：
authz：负责账号权限的管理，控制账号是否读写权限
passwd：负责账号和密码的用户名单管理
svnserve.conf：svn服务器配置文件
五、用户密码、权限（重点）
编辑authz , vim authz
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### (''). [aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average [groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe # [/foo/bar]
# harry = rw
# &joe = r
# * = # [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r
[/]
cmingzhen = r
[/]
cmingzhen = r
表示用户只有读的权限
vim passwd
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line. [users]
# harry = harryssecret
# sally = sallyssecret
cmingzhen = 123456
形式就是
账号 = 密码
vim svnserver.conf
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.) ### Visit http://subversion.apache.org/ for more information. [general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
#anon-access = read
anon-access = none
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
realm = /var/svn/svnrepos/versionrepo
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above. Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none [sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256
anon-access = none: 不允许匿名访问
auth-access = write 这个这么写就可以了
password-db = passwd 设置密码文件
authz-db = authz 设置认证文件目录
realm = /var/svn/svnrepos/versionrepo 这个引到你的仓库的地址
六、
关闭防火墙，开启3690端口(这个自行百度)。执行命令：
svnserve -d -r /var/svn/svnrepos
然后就可以通过客户端访问了。先用浏览器测试访问 ip:3690/versionrepo，有东西跑出来就是成功了。接下来就是用客户端连接check out 代码了。
七、check out
svn://ip:3690/versionrepo 就可以导出来，但是现在是空的。
可以在这个文件夹添加自己的东西然后提交。
八、重启
本人一般都是用关了再开的办法：
关： 先找出进程号： ps -aux | grep svn
然后找到对应的进程号，kill -9 进程号