环境准备
3台机器，每个机器双网卡，每个机器还需要额外添加1个10GB的磁盘用于测试
机器系统版本是centos6.6
[root@gluster-1-1 ~]# uname -rm
2.6.32-504.el6.x86_64 x86_64
[root@gluster-1-1 ~]# cat /etc/redhat-release
CentOS release 6.6 (Final)
[root@gluster-1-1 ~]#
3台机器对应关系
10.0.1.151 gluster-1-1
10.0.1.152 gluster-1-2
10.0.1.153 gluster-1-3
这里实验都是采用eth0的网络操作的，实际生产中3个gluster节点之间相互通信应该采用eth1
hosts文件添加解析，执行如下命令
cat >>/etc/hosts<<EOF
10.0.1.151 gluster-1-1
10.0.1.152 gluster-1-2
10.0.1.153 gluster-1-3
EOF
下载gluster相关软件包
mkdir -p /tools
cd /tools
wget http://bits.gluster.org/pub/gluster/glusterfs/3.4.2/x86_64/glusterfs-3.4.2-1.el6.x86_64.rpm
wget http://bits.gluster.org/pub/gluster/glusterfs/3.4.2/x86_64/glusterfs-api-3.4.2-1.el6.x86_64.rpm
wget http://bits.gluster.org/pub/gluster/glusterfs/3.4.2/x86_64/glusterfs-cli-3.4.2-1.el6.x86_64.rpm
wget http://bits.gluster.org/pub/gluster/glusterfs/3.4.2/x86_64/glusterfs-fuse-3.4.2-1.el6.x86_64.rpm
wget http://bits.gluster.org/pub/gluster/glusterfs/3.4.2/x86_64/glusterfs-libs-3.4.2-1.el6.x86_64.rpm
wget http://bits.gluster.org/pub/gluster/glusterfs/3.4.2/x86_64/glusterfs-server-3.4.2-1.el6.x86_64.rpm
查看下载的包
[root@gluster-1-1 tools]# ls -al
total 1924
drwxr-xr-x 3 root root 4096 Feb 11 01:20 .
dr-xr-xr-x. 26 root root 4096 Feb 11 01:12 ..
-rw-r--r-- 1 root root 997688 Jan 3 2014 glusterfs-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 56728 Jan 3 2014 glusterfs-api-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 98904 Jan 3 2014 glusterfs-cli-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 80980 Jan 3 2014 glusterfs-fuse-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 217380 Jan 3 2014 glusterfs-libs-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 492268 Jan 3 2014 glusterfs-server-3.4.2-1.el6.x86_64.rpm
安装gluster的rpm包，启动服务
先安装依赖包
yum install rpcbind libaio lvm2-devel -y
安装gluster包
[root@gluster-1-2 tools]# rpm -ivh gluster*.rpm
Preparing... ########################################### [100%]
1:glusterfs-libs ########################################### [ 17%]
2:glusterfs ########################################### [ 33%]
3:glusterfs-cli ########################################### [ 50%]
4:glusterfs-fuse ########################################### [ 67%]
5:glusterfs-server ########################################### [ 83%]
error reading information on service glusterfsd: No such file or directory
6:glusterfs-api ########################################### [100%]
[root@gluster-1-2 tools]#
启动服务gluster
[root@gluster-1-1 tools]# /etc/init.d/glusterd start
Starting glusterd: [ OK ]
[root@gluster-1-1 tools]# /etc/init.d/glusterd status
glusterd (pid 3139) is running...
安装磁盘性能测试监控工具
还需要准备下面工具，方便后期测试磁盘IO等指标
[root@gluster-1-1 tools]# ll
total 3160
-rw-r--r-- 1 root root 112206 Jul 23 2012 atop-1.27-3.x86_64.rpm
-rw-r--r-- 1 root root 274992 Apr 7 2014 fio-2.1.7-1.el6.rf.x86_64.rpm
-rw-r--r-- 1 root root 735060 Feb 10 19:27 iozone-3.394-1.el6.rf.x86_64.rpm
-rw-r--r-- 1 root root 54380 Feb 11 03:07 iperf-2.0.5-11.el6.x86_64.rpm
-rw-r--r-- 1 1001 ftp 47000 Mar 3 2002 postmark-1.51.c
安装工具，atop工具还依赖libibverbs包，需要先安装它
[root@gluster-1-1 tools]# rpm -ivh atop*.rpm
Preparing... ########################################### [100%]
package atop-1.27-3.x86_64 is already installed
[root@gluster-1-1 tools]# rpm -ivh fio*.rpm
warning: fio-2.1.7-1.el6.rf.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 6b8d79e6: NOKEY
error: Failed dependencies:
libibverbs.so.1()(64bit) is needed by fio-2.1.7-1.el6.rf.x86_64
[root@gluster-1-1 tools]# yum install libibverbs -y
安装4个工具，atop，fio，iozone，iperf
rpm -ivh atop*.rpm
rpm -ivh fio*.rpm
rpm -ivh iozone*.rpm
rpm -ivh iperf*.rpm
配置postmark工具
[root@gluster-1-3 tools]# yum install gcc -y
[root@gluster-1-3 tools]# gcc -o postmark postmark-1.51.c
/tmp/cco7XMjr.o: In function `cli_show':
postmark-1.51.c:(.text+0x26f9): warning: the `getwd' function is dangerous and should not be used.
[root@gluster-1-3 tools]# ls
atop-1.27-3.x86_64.rpm glusterfs-fuse-3.4.2-1.el6.x86_64.rpm no_use_rpm
fio-2.1.7-1.el6.rf.x86_64.rpm glusterfs-libs-3.4.2-1.el6.x86_64.rpm postmark
glusterfs-3.4.2-1.el6.x86_64.rpm glusterfs-server-3.4.2-1.el6.x86_64.rpm postmark-1.51.c
glusterfs-api-3.4.2-1.el6.x86_64.rpm iozone-3.394-1.el6.rf.x86_64.rpm
glusterfs-cli-3.4.2-1.el6.x86_64.rpm iperf-2.0.5-11.el6.x86_64.rpm
[root@gluster-1-3 tools]# [root@gluster-1-3 tools]# cp postmark /usr/bin/
[root@gluster-1-3 tools]#
[root@gluster-1-1 tools]# postmark
PostMark v1.51 : 8/14/01
pm>quit
[root@gluster-1-1 tools]#
配置Gluster服务，添加节点
配置时间服务
[root@gluster-1-2 tools]# /etc/init.d/ntpd start
Starting ntpd: [ OK ]
[root@gluster-1-2 tools]# date
Sat Feb 11 03:37:12 CST 2017
[root@gluster-1-2 tools]# date
Fri Feb 10 19:38:13 CST 2017
格式化磁盘并挂载
格式化分区并挂载
echo "mount /dev/sdb /brick1" >>/etc/rc.local
mkdir /brick1
source /etc/rc.local
df -h
环境准备完毕，gluster操作。添加gluster节点服务器
[root@gluster-1-1 tools]# gluster peer probe gluster2
peer probe: failed: Probe returned with unknown errno 107
[root@gluster-1-1 tools]# gluster peer probe gluster-1-2
peer probe: success
[root@gluster-1-1 tools]# gluster peer probe gluster-1-3
peer probe: success
[root@gluster-1-1 tools]#
添加节点之后，检查
在机器1上查看 [root@gluster-1-1 tools]# gluster peer status
Number of Peers: 2 Hostname: gluster-1-2
Port: 24007
Uuid: 34fb23b8-dcb6-4009-abad-14f47a7a9481
State: Peer in Cluster (Connected) Hostname: gluster-1-3
Port: 24007
Uuid: 2b3b3536-0ca8-44a6-908c-e32e4b80f28e
State: Peer in Cluster (Connected)
[root@gluster-1-1 tools]# 在机器2上查看
[root@gluster-1-2 tools]# gluster peer status
Number of Peers: 2 Hostname: 10.0.1.151
Port: 24007
Uuid: 0c058823-7956-4761-b56f-84ba85f528b8
State: Peer in Cluster (Connected) Hostname: gluster-1-3
Uuid: 2b3b3536-0ca8-44a6-908c-e32e4b80f28e
State: Peer in Cluster (Connected) 机器3上查看
[root@gluster-1-3 tools]# gluster peer status
Number of Peers: 2 Hostname: 10.0.1.151
Port: 24007
Uuid: 0c058823-7956-4761-b56f-84ba85f528b8
State: Peer in Cluster (Connected) Hostname: gluster-1-2
Uuid: 34fb23b8-dcb6-4009-abad-14f47a7a9481
State: Peer in Cluster (Connected)
[root@gluster-1-3 tools]#
创建Hash卷
创建卷
这里再gluster-1-3机器上执行的，默认这里创建的是哈希卷
它会自动在gluster下面的brick1下面创建个b1目录
[root@gluster-1-3 tools]# gluster volume create testvol gluster-1-1:/brick1/b1
volume create: testvol: success: please start the volume to access data
[root@gluster-1-3 tools]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.1G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
[root@gluster-1-3 tools]# [root@gluster-1-3 tools]# ls /brick1/
lost+found
[root@gluster-1-3 tools]#
[root@gluster-1-1 tools]# ls /brick1/
b1 lost+found
[root@gluster-1-1 tools]#
查看gluster相关帮助
[root@gluster-1-3 tools]# gluster volume help
volume info [all|<VOLNAME>] - list information of all volumes
volume create <NEW-VOLNAME> [stripe <COUNT>] [replica <COUNT>] [device vg] [transport <tcp|rdma|tcp,rdma>] <NEW-BRICK> ... [force] - create a new volume of specified type with mentioned bricks
volume delete <VOLNAME> - delete volume specified by <VOLNAME>
volume start <VOLNAME> [force] - start volume specified by <VOLNAME>
volume stop <VOLNAME> [force] - stop volume specified by <VOLNAME>
volume add-brick <VOLNAME> [<stripe|replica> <COUNT>] <NEW-BRICK> ... [force] - add brick to volume <VOLNAME>
volume remove-brick <VOLNAME> [replica <COUNT>] <BRICK> ... {start|stop|status|commit|force} - remove brick from volume <VOLNAME>
volume rebalance <VOLNAME> [fix-layout] {start|stop|status} [force] - rebalance operations
volume replace-brick <VOLNAME> <BRICK> <NEW-BRICK> {start [force]|pause|abort|status|commit [force]} - replace-brick operations
volume set <VOLNAME> <KEY> <VALUE> - set options for volume <VOLNAME>
volume help - display help for the volume command
volume log rotate <VOLNAME> [BRICK] - rotate the log file for corresponding volume/brick
volume sync <HOSTNAME> [all|<VOLNAME>] - sync the volume information from a peer
volume reset <VOLNAME> [option] [force] - reset all the reconfigured options
volume profile <VOLNAME> {start|info|stop} [nfs] - volume profile operations
volume quota <VOLNAME> <enable|disable|limit-usage|list|remove> [path] [value] - quota translator specific operations
volume top <VOLNAME> {[open|read|write|opendir|readdir [nfs]] |[read-perf|write-perf [nfs|{bs <size> count <count>}]]|[clear [nfs]]} [brick <brick>] [list-cnt <count>] - volume top operations
volume status [all | <VOLNAME> [nfs|shd|<BRICK>]] [detail|clients|mem|inode|fd|callpool] - display status of all or specified volume(s)/brick
volume heal <VOLNAME> [{full | info {healed | heal-failed | split-brain}}] - self-heal commands on volume specified by <VOLNAME>
volume statedump <VOLNAME> [nfs] [all|mem|iobuf|callpool|priv|fd|inode|history]... - perform statedump on bricks
volume list - list all volumes in cluster
volume clear-locks <VOLNAME> <path> kind {blocked|granted|all}{inode [range]|entry [basename]|posix [range]} - Clear locks held on path
[root@gluster-1-3 tools]#
启动卷，查看卷状态
数据以后就存到gluster-1-1的brick1下面的b1下面了
[root@gluster-1-3 tools]# gluster volume start testvol
volume start: testvol: success
[root@gluster-1-3 tools]# gluster volume info testvol Volume Name: testvol
Type: Distribute
Volume ID: ec60d25c-06f6-4174-aa42-b00709d20e19
Status: Started
Number of Bricks: 1
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
[root@gluster-1-3 tools]#
挂载卷操作
有客户端的话，在客户端挂载，没客户端可以一个节点上练习挂载
[root@gluster-1-3 tools]# mount -t glusterfs gluster-1-1:/testvol /mnt
[root@gluster-1-3 tools]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.1G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/testvol 9.8G 23M 9.2G 1% /mnt
[root@gluster-1-3 tools]#
mount看一下
[root@gluster-1-3 tools]# mount
/dev/sda3 on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sda1 on /boot type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
vmware-vmblock on /var/run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)
/dev/sdb on /brick1 type ext4 (rw)
gluster-1-1:/testvol on /mnt type fuse.glusterfs (rw,default_permissions,allow_other,max_read=131072)
[root@gluster-1-3 tools]#
在挂载点新建文件和删除文件，一些正常
[root@gluster-1-3 tools]# cd /mnt/
[root@gluster-1-3 mnt]# ls
[root@gluster-1-3 mnt]# touch ab c
[root@gluster-1-3 mnt]# mkdir ddd
[root@gluster-1-3 mnt]# rm -f c
[root@gluster-1-3 mnt]# ls
ab ddd
[root@gluster-1-3 mnt]#
删除节点操作。节点机器上无法删除自己
[root@gluster-1-3 mnt]# gluster peer detach gluster-1-2
peer detach: success
[root@gluster-1-3 mnt]# gluster peer detach gluster-1-3
peer detach: failed: gluster-1-3 is localhost
[root@gluster-1-3 mnt]# gluster peer status
peer status: No peers present
[root@gluster-1-3 mnt]#
需要在gluster-1-1上操作
[root@gluster-1-1 tools]# gluster peer detach gluster-1-3
peer detach: success
[root@gluster-1-1 tools]# gluster peer status
peer status: No peers present
[root@gluster-1-1 tools]#
卷还存在
[root@gluster-1-1 tools]# gluster volume info Volume Name: testvol
Type: Distribute
Volume ID: ec60d25c-06f6-4174-aa42-b00709d20e19
Status: Started
Number of Bricks: 1
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
[root@gluster-1-1 tools]#
把节点都加回来
[root@gluster-1-1 tools]# gluster peer probe gluster-1-2
peer probe: success
[root@gluster-1-1 tools]# gluster peer probe gluster-1-3
peer probe: success
[root@gluster-1-1 tools]# gluster peer status
Number of Peers: 2 Hostname: gluster-1-2
Port: 24007
Uuid: 34fb23b8-dcb6-4009-abad-14f47a7a9481
State: Peer in Cluster (Connected) Hostname: gluster-1-3
Port: 24007
Uuid: 2b3b3536-0ca8-44a6-908c-e32e4b80f28e
State: Peer in Cluster (Connected)
[root@gluster-1-1 tools]#
增加brick，brick后要有文件夹，否则就行第一行这样failed了
[root@gluster-1-1 tools]# gluster volume add-brick testvol gluster-1-2:/brick1/
volume add-brick: failed:
[root@gluster-1-1 tools]# gluster volume add-brick testvol gluster-1-2:/brick1/b2
volume add-brick: success
[root@gluster-1-1 tools]# gluster volume add-brick testvol gluster-1-3:/brick1/b3
volume add-brick: success
客户侧挂载点的容量就变了
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/testvol 9.8G 23M 9.2G 1% /mnt
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/testvol 30G 68M 28G 1% /mnt
[root@gluster-1-3 mnt]#
客户端创建一个目录，所有节点都会出现
[root@gluster-1-3 mnt]# cd /mnt/
[root@gluster-1-3 mnt]# ls
ab ddd
[root@gluster-1-3 mnt]# mkdir tools
[root@gluster-1-3 mnt]# ls
ab ddd tools
[root@gluster-1-3 mnt]# ls /brick1/b3/
ddd tools
[root@gluster-1-3 mnt]# [root@gluster-1-2 tools]# ls /brick1/b2/
ddd tools
[root@gluster-1-2 tools]# [root@gluster-1-1 tools]# ls /brick1/b1/
ab ddd tools
[root@gluster-1-1 tools]#
复制文件到客户端挂载点内，可以看到文件在3个节点的brick内hash分布了
[root@gluster-1-3 mnt]# cp -rf /tools/* /mnt/tools/
[root@gluster-1-3 mnt]# ll /mnt/tools/
total 3143
-rw-r--r-- 1 root root 112206 Feb 10 20:43 atop-1.27-3.x86_64.rpm
-rw-r--r-- 1 root root 274992 Feb 10 20:43 fio-2.1.7-1.el6.rf.x86_64.rpm
-rw-r--r-- 1 root root 997688 Feb 10 20:43 glusterfs-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 56728 Feb 10 20:43 glusterfs-api-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 98904 Feb 10 20:43 glusterfs-cli-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 80980 Feb 10 20:43 glusterfs-fuse-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 217380 Feb 10 20:43 glusterfs-libs-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 492268 Feb 10 20:43 glusterfs-server-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 1 root root 735060 Feb 10 20:43 iozone-3.394-1.el6.rf.x86_64.rpm
-rw-r--r-- 1 root root 54380 Feb 10 20:43 iperf-2.0.5-11.el6.x86_64.rpm
drwxr-xr-x 2 root root 12288 Feb 10 20:43 no_use_rpm
-rwxr-xr-x 1 root root 34789 Feb 10 20:43 postmark
-rw-r--r-- 1 root root 47000 Feb 10 20:43 postmark-1.51.c 文件在3个节点的brick内hash分布了
[root@gluster-1-3 mnt]# ll /brick1/b3/tools/
total 108
-rw-r--r-- 2 root root 54380 Feb 10 20:43 iperf-2.0.5-11.el6.x86_64.rpm
drwxr-xr-x 2 root root 4096 Feb 10 20:43 no_use_rpm
-rw-r--r-- 2 root root 47000 Feb 10 20:43 postmark-1.51.c
[root@gluster-1-3 mnt]# [root@gluster-1-2 tools]# ll /brick1/b2/tools/
total 2788
-rw-r--r-- 2 root root 274992 Feb 10 20:43 fio-2.1.7-1.el6.rf.x86_64.rpm
-rw-r--r-- 2 root root 997688 Feb 10 20:43 glusterfs-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 2 root root 80980 Feb 10 20:43 glusterfs-fuse-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 2 root root 217380 Feb 10 20:43 glusterfs-libs-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 2 root root 492268 Feb 10 20:43 glusterfs-server-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 2 root root 735060 Feb 10 20:43 iozone-3.394-1.el6.rf.x86_64.rpm
drwxr-xr-x 2 root root 4096 Feb 10 20:43 no_use_rpm
-rwxr-xr-x 2 root root 34789 Feb 10 20:43 postmark
[root@gluster-1-2 tools]# [root@gluster-1-1 mnt]# ll /brick1/b1/tools/
total 272
-rw-r--r-- 2 root root 112206 Feb 10 20:43 atop-1.27-3.x86_64.rpm
-rw-r--r-- 2 root root 56728 Feb 10 20:43 glusterfs-api-3.4.2-1.el6.x86_64.rpm
-rw-r--r-- 2 root root 98904 Feb 10 20:43 glusterfs-cli-3.4.2-1.el6.x86_64.rpm
drwxr-xr-x 2 root root 4096 Feb 10 20:43 no_use_rpm
[root@gluster-1-1 mnt]#
删除卷会造成一些数据丢失，因为被删除节点有数据
[root@gluster-1-3 mnt]# ll /brick1/b3/tools/
total 108
-rw-r--r-- 2 root root 54380 Feb 10 20:43 iperf-2.0.5-11.el6.x86_64.rpm
drwxr-xr-x 2 root root 4096 Feb 10 20:43 no_use_rpm
-rw-r--r-- 2 root root 47000 Feb 10 20:43 postmark-1.51.c [root@gluster-1-1 mnt]# gluster volume remove-brick testvol gluster-1-3:/brick1/b3
Removing brick(s) can result in data loss. Do you want to Continue? (y/n) y
volume remove-brick commit force: success
[root@gluster-1-1 mnt]# [root@gluster-1-3 mnt]# ls /mnt/tools/
atop-1.27-3.x86_64.rpm glusterfs-libs-3.4.2-1.el6.x86_64.rpm
fio-2.1.7-1.el6.rf.x86_64.rpm glusterfs-server-3.4.2-1.el6.x86_64.rpm
glusterfs-3.4.2-1.el6.x86_64.rpm iozone-3.394-1.el6.rf.x86_64.rpm
glusterfs-api-3.4.2-1.el6.x86_64.rpm no_use_rpm
glusterfs-cli-3.4.2-1.el6.x86_64.rpm postmark
glusterfs-fuse-3.4.2-1.el6.x86_64.rpm
[root@gluster-1-3 mnt]# 查看卷的信息，mount点空间也下降了
[root@gluster-1-1 mnt]# gluster volume info Volume Name: testvol
Type: Distribute
Volume ID: ec60d25c-06f6-4174-aa42-b00709d20e19
Status: Started
Number of Bricks: 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
[root@gluster-1-1 mnt]# [root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 29M 9.2G 1% /brick1
gluster-1-1:/testvol 20G 49M 19G 1% /mnt [root@gluster-1-3 mnt]# gluster volume info Volume Name: testvol
Type: Distribute
Volume ID: ec60d25c-06f6-4174-aa42-b00709d20e19
Status: Started
Number of Bricks: 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
[root@gluster-1-3 mnt]#
把brick加回来时提示失败，因为原先的brick目录下有扩展属性，带有原来的卷的信息
[root@gluster-1-1 mnt]# gluster volume add-brick testvol gluster-1-3:/brick1/b3
volume add-brick: failed:
[root@gluster-1-1 mnt]# 需要删除目录，才能加回来
[root@gluster-1-3 mnt]# rm -rf /brick1/b3/
[root@gluster-1-3 mnt]# ls /brick1/
lost+found
[root@gluster-1-3 mnt]# 添加回来了
[root@gluster-1-1 mnt]# gluster volume add-brick testvol gluster-1-3:/brick1/b3
volume add-brick: success
[root@gluster-1-1 mnt]# gluster volume info Volume Name: testvol
Type: Distribute
Volume ID: ec60d25c-06f6-4174-aa42-b00709d20e19
Status: Started
Number of Bricks: 3
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
Brick3: gluster-1-3:/brick1/b3
[root@gluster-1-1 mnt]#
rebalance操作能够让文件按照之前的规则再分配
做下rebalance，看到新加的节点上分到了文件和目录
现网中rebalance，最好在服务器空闲的时间操作
[root@gluster-1-3 mnt]# ls /brick1/b3/
[root@gluster-1-3 mnt]# gluster volume rebalance testvol start
volume rebalance: testvol: success: Starting rebalance on volume testvol has been successful.
ID: 649f717b-406f-4a32-a385-cc614cda5fbd
[root@gluster-1-3 mnt]# ls /brick1/b3/
ddd tools
[root@gluster-1-3 mnt]# ls /brick1/b3/tools/
atop-1.27-3.x86_64.rpm glusterfs-cli-3.4.2-1.el6.x86_64.rpm
glusterfs-api-3.4.2-1.el6.x86_64.rpm no_use_rpm
[root@gluster-1-3 mnt]#
空间也回来了
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 24M 9.2G 1% /brick1
gluster-1-1:/testvol 20G 54M 19G 1% /mnt
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 24M 9.2G 1% /brick1
gluster-1-1:/testvol 30G 77M 28G 1% /mnt
[root@gluster-1-3 mnt]#
也可以查看平衡状态。
[root@gluster-1-3 mnt]# gluster volume rebalance testvol status
Node Rebalanced-files size scanned failures skipped status run time in secs
--------- ----------- ----------- ----------- ----------- ----------- ------------ --------------
localhost 0 0Bytes 1 0 0 completed 0.00
localhost 0 0Bytes 1 0 0 completed 0.00
localhost 0 0Bytes 1 0 0 completed 0.00
gluster-1-2 0 0Bytes 20 0 0 completed 0.00
volume rebalance: testvol: success:
[root@gluster-1-3 mnt]#
卸载挂载点，停止卷
这个操作很危险，但是卷删除了，下面的数据还在
[root@gluster-1-3 mnt]# umount /mnt -lf
[root@gluster-1-3 mnt]# gluster volume stop testvol
Stopping volume will make its data inaccessible. Do you want to continue? (y/n) y
volume stop: testvol: success
[root@gluster-1-3 mnt]# gluster volume delete testvol
Deleting volume will erase all information about the volume. Do you want to continue? (y/n) y
volume delete: testvol: success
[root@gluster-1-3 mnt]# ls /brick1/b3/tools/
atop-1.27-3.x86_64.rpm glusterfs-cli-3.4.2-1.el6.x86_64.rpm
glusterfs-api-3.4.2-1.el6.x86_64.rpm no_use_rpm
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 24M 9.2G 1% /brick1
[root@gluster-1-3 mnt]#
卷信息也空白了
[root@gluster-1-3 mnt]# gluster volume info
No volumes present
[root@gluster-1-3 mnt]#
想要清除数据，可以登录到每个节点上删除brick下面的数据
[root@gluster-1-3 mnt]# rm -rf /brick1/b3/
[root@gluster-1-3 mnt]# [root@gluster-1-2 tools]# rm -rf /brick1/b2/
[root@gluster-1-2 tools]# [root@gluster-1-1 mnt]# rm -rf /brick1/b1/
[root@gluster-1-1 mnt]#
创建复制卷
操作如下，需要replica 2 表示复制卷
[root@gluster-1-1 mnt]# gluster volume create testvol replica 2 gluster-1-1:/brick1/b1 gluster-1-2:/brick1/b2
volume create: testvol: success: please start the volume to access data
[root@gluster-1-1 mnt]# gluster volume info Volume Name: testvol
Type: Replicate
Volume ID: 1fa96ed0-a062-4ccf-9e4f-07cb9d84296f
Status: Created
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
[root@gluster-1-1 mnt]#
启动卷，查看卷状态
[root@gluster-1-1 mnt]# gluster volume start testvol
volume start: testvol: success
[root@gluster-1-1 mnt]# gluster volume info Volume Name: testvol
Type: Replicate
Volume ID: 1fa96ed0-a062-4ccf-9e4f-07cb9d84296f
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
[root@gluster-1-1 mnt]#
挂载后操作创建文件文件
容量只有一个节点的容量，因为是复制卷
[root@gluster-1-1 mnt]# mount -t glusterfs gluster-1-3:/testvol /mnt
[root@gluster-1-1 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-3:/testvol 9.8G 23M 9.2G 1% /mnt
[root@gluster-1-1 mnt]# touch /mnt/{a,b,c}
[root@gluster-1-1 mnt]# ls /mnt/
a b c
[root@gluster-1-1 mnt]# ls /brick1/b1/
a b c
[root@gluster-1-1 mnt]# 节点2上也一样，这就是复制卷
[root@gluster-1-2 tools]# ls /brick1/b2/
a b c
[root@gluster-1-2 tools]#
模拟误删卷信息故障
删除卷信息，卷信息在下面路径下
[root@gluster-1-2 tools]# ll /var/lib/glusterd/vols/
total 4
drwxr-xr-x 4 root root 4096 Feb 10 21:19 testvol
[root@gluster-1-2 tools]# ll /var/lib/glusterd/vols/testvol/
total 40
drwxr-xr-x 2 root root 4096 Feb 10 21:19 bricks
-rw------- 1 root root 16 Feb 10 21:19 cksum
-rw------- 1 root root 328 Feb 10 21:19 info
-rw------- 1 root root 34 Feb 10 21:19 node_state.info
-rw------- 1 root root 12 Feb 10 21:19 rbstate
drwxr-xr-x 2 root root 4096 Feb 10 21:19 run
-rw------- 1 root root 1302 Feb 10 21:18 testvol-fuse.vol
-rw------- 1 root root 1332 Feb 10 21:18 testvol.gluster-1-1.brick1-b1.vol
-rw------- 1 root root 1332 Feb 10 21:18 testvol.gluster-1-2.brick1-b2.vol
-rw------- 1 root root 1530 Feb 10 21:18 trusted-testvol-fuse.vol
[root@gluster-1-2 tools]# rm -f /var/lib/glusterd/vols/testvol/
rm: cannot remove `/var/lib/glusterd/vols/testvol/': Is a directory
[root@gluster-1-2 tools]# rm -rf /var/lib/glusterd/vols/testvol/ [root@gluster-1-2 tools]# ll /var/lib/glusterd/vols/testvol/
ls: cannot access /var/lib/glusterd/vols/testvol/: No such file or directory
恢复卷信息
把卷信息同步过来，gluster-1-1节点上是正常的
下面操作的all表示同步所有卷信息过来，这里也可以写成testvol
这种卷信息要定期备份
[root@gluster-1-2 tools]# gluster volume sync gluster-1-1 all
Sync volume may make data inaccessible while the sync is in progress. Do you want to continue? (y/n) y
volume sync: success
[root@gluster-1-2 tools]# ll /var/lib/glusterd/vols/testvol/
total 36
drwxr-xr-x 2 root root 4096 Feb 10 21:45 bricks
-rw------- 1 root root 16 Feb 10 21:45 cksum
-rw------- 1 root root 328 Feb 10 21:45 info
-rw------- 1 root root 34 Feb 10 21:45 node_state.info
-rw------- 1 root root 12 Feb 10 21:45 rbstate
-rw------- 1 root root 1302 Feb 10 21:45 testvol-fuse.vol
-rw------- 1 root root 1332 Feb 10 21:45 testvol.gluster-1-1.brick1-b1.vol
-rw------- 1 root root 1332 Feb 10 21:45 testvol.gluster-1-2.brick1-b2.vol
-rw------- 1 root root 1530 Feb 10 21:45 trusted-testvol-fuse.vol
[root@gluster-1-2 tools]#
Gluster设置允许可信任客户端IP
一些参数设置
设置只允许192.168.1.*的访问
[root@gluster-1-1 mnt]# gluster volume set testvol auth.allow 192.168.1.*
volume set: success
[root@gluster-1-1 mnt]# gluster volume info Volume Name: testvol
Type: Replicate
Volume ID: 1fa96ed0-a062-4ccf-9e4f-07cb9d84296f
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
Options Reconfigured:
auth.allow: 192.168.1.*
[root@gluster-1-1 mnt]# 再次mount就失败了
[root@gluster-1-3 mnt]# mount -t glusterfs gluster-1-1:/testvol /mnt
Mount failed. Please check the log file for more details.
改成了all，测试还是无法mount，改成10网段才可以，这里很奇怪
[root@gluster-1-1 mnt]# gluster volume info Volume Name: testvol
Type: Replicate
Volume ID: 1fa96ed0-a062-4ccf-9e4f-07cb9d84296f
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
Options Reconfigured:
auth.allow: all
[root@gluster-1-1 mnt]# gluster volume set testvol auth.allow 10.0.*
volume set: success
[root@gluster-1-1 mnt]# mount -t glusterfs gluster-1-3:/testvol /mnt
[root@gluster-1-1 mnt]#
关于gluster的nfs功能
系统会启动一个nfs进程
[root@gluster-1-1 mnt]# ps -ef | grep nfs
root 31399 1 0 21:19 ? 00:00:00 /usr/sbin/glusterfs -s localhost --volfile-id glusternfs -p /var/lib/glusterd/nfs/run/nfs.pid -l /var/log/glusterfs/nfs.log -S /var/run/f3d908eb4b03aac9575816a.socket
root 31612 2556 0 22:00 pts/0 00:00:00 grep --colour=auto nfs
[root@gluster-1-1 mnt]# 关闭它自带的nfs
[root@gluster-1-1 mnt]# gluster volume set testvol nfs.disable on
volume set: success
[root@gluster-1-1 mnt]# ps -ef | grep nfs
root 31636 2556 0 22:01 pts/0 00:00:00 grep --colour=auto nfs
[root@gluster-1-1 mnt]# 在信息里也能看到是关闭了
[root@gluster-1-1 mnt]# gluster volume info Volume Name: testvol
Type: Replicate
Volume ID: 1fa96ed0-a062-4ccf-9e4f-07cb9d84296f
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
Options Reconfigured:
nfs.disable: on
auth.allow: 10.0.*
[root@gluster-1-1 mnt]#
glusterfs操作复习
系统验证测试
存储配置测试
网络配置测试
卷配置测试
系统性能测试
再创建一个卷
[root@gluster-1-1 mnt]# gluster volume create dhtvol gluster-1-1:/brick1/dht
volume create: dhtvol: success: please start the volume to access data
[root@gluster-1-1 mnt]# gluster volume start dhtvol
volume start: dhtvol: success
[root@gluster-1-1 mnt]# gluster volume info dhtvol Volume Name: dhtvol
Type: Distribute
Volume ID: 7884976b-9470-44df-af40-a3ee8a7bd021
Status: Started
Number of Bricks: 1
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/dht
[root@gluster-1-1 mnt]#
客户端挂载
[root@gluster-1-3 mnt]# mount -t glusterfs gluster-1-1:/dhtvol /mnt
[root@gluster-1-3 mnt]# [root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/dhtvol 9.8G 23M 9.2G 1% /mnt
[root@gluster-1-3 mnt]#
增加卷
[root@gluster-1-3 mnt]# gluster volume add-brick dhtvol gluster-1-2:/brick1/dht
volume add-brick: success
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/dhtvol 9.8G 23M 9.2G 1% /mnt
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/dhtvol 20G 45M 19G 1% /mnt
[root@gluster-1-3 mnt]#
继续增加
[root@gluster-1-3 mnt]# gluster volume add-brick dhtvol gluster-1-3:/brick1/dht
volume add-brick: success
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/dhtvol 20G 45M 19G 1% /mnt
[root@gluster-1-3 mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 23M 9.2G 1% /brick1
gluster-1-1:/dhtvol 30G 68M 28G 1% /mnt
[root@gluster-1-3 mnt]#
查看卷的信息
[root@gluster-1-3 mnt]# gluster volume info dhtvol Volume Name: dhtvol
Type: Distribute
Volume ID: 7884976b-9470-44df-af40-a3ee8a7bd021
Status: Started
Number of Bricks: 3
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/dht
Brick2: gluster-1-2:/brick1/dht
Brick3: gluster-1-3:/brick1/dht
[root@gluster-1-3 mnt]#
glusterfs性能测试工具
在一个节点起服务
[root@gluster-1-1 mnt]# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
客户端连接服务器端，测试网络速度
[root@gluster-1-2 tools]# iperf -c gluster-1-1
------------------------------------------------------------
Client connecting to gluster-1-1, TCP port 5001
TCP window size: 42.5 KByte (default)
------------------------------------------------------------
[ 3] local 10.0.1.152 port 59526 connected with 10.0.1.151 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 6.63 GBytes 5.69 Gbits/sec
[root@gluster-1-2 tools]#
服务端也能查看到信息
因为是虚拟机环境，这里虚高了。
[root@gluster-1-1 mnt]# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 10.0.1.151 port 5001 connected with 10.0.1.152 port 59526
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 6.63 GBytes 5.69 Gbits/sec
你觉得压力不够，可以客户端多个进程一起发包
使用-P参数
客户端结果如下
[root@gluster-1-2 tools]# iperf -c gluster-1-1 -P 4
------------------------------------------------------------
Client connecting to gluster-1-1, TCP port 5001
TCP window size: 19.3 KByte (default)
------------------------------------------------------------
[ 5] local 10.0.1.152 port 59529 connected with 10.0.1.151 port 5001
[ 4] local 10.0.1.152 port 59528 connected with 10.0.1.151 port 5001
[ 3] local 10.0.1.152 port 59527 connected with 10.0.1.151 port 5001
[ 6] local 10.0.1.152 port 59530 connected with 10.0.1.151 port 5001
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-10.0 sec 1.31 GBytes 1.13 Gbits/sec
[ 5] 0.0-10.0 sec 933 MBytes 783 Mbits/sec
[ 4] 0.0-10.0 sec 1.21 GBytes 1.04 Gbits/sec
[ 3] 0.0-10.0 sec 2.64 GBytes 2.27 Gbits/sec
[SUM] 0.0-10.0 sec 6.07 GBytes 5.22 Gbits/sec
[root@gluster-1-2 tools]#
服务端结果如下
[ 5] local 10.0.1.151 port 5001 connected with 10.0.1.152 port 59527
[ 4] local 10.0.1.151 port 5001 connected with 10.0.1.152 port 59528
[ 6] local 10.0.1.151 port 5001 connected with 10.0.1.152 port 59529
[ 7] local 10.0.1.151 port 5001 connected with 10.0.1.152 port 59530
[ 5] 0.0-10.0 sec 2.64 GBytes 2.27 Gbits/sec
[ 4] 0.0-10.0 sec 1.21 GBytes 1.03 Gbits/sec
[ 6] 0.0-10.0 sec 933 MBytes 782 Mbits/sec
[ 7] 0.0-10.0 sec 1.31 GBytes 1.13 Gbits/sec
[SUM] 0.0-10.0 sec 6.07 GBytes 5.21 Gbits/sec
gluster volume status这个语句的作用
[root@gluster-1-2 tools]# gluster volume status
Status of volume: testvol
Gluster process Port Online Pid
------------------------------------------------------------------------------
Brick gluster-1-1:/brick1/b1 49153 Y 31387
Brick gluster-1-2:/brick1/b2 N/A N N/A
Self-heal Daemon on localhost N/A Y 31262
Self-heal Daemon on 10.0.1.151 N/A Y 31403
Self-heal Daemon on gluster-1-3 N/A Y 31378 There are no active volume tasks
Status of volume: dhtvol
Gluster process Port Online Pid
------------------------------------------------------------------------------
Brick gluster-1-1:/brick1/dht 49154 Y 31668
Brick gluster-1-2:/brick1/dht 49154 Y 31351
Brick gluster-1-3:/brick1/dht 49154 Y 31667
NFS Server on localhost 2049 Y 31373
NFS Server on gluster-1-3 2049 Y 31677
NFS Server on 10.0.1.151 2049 Y 31705 There are no active volume tasks
也可以指定卷名查看状态
[root@gluster-1-2 tools]# gluster volume status dhtvol
Status of volume: dhtvol
Gluster process Port Online Pid
------------------------------------------------------------------------------
Brick gluster-1-1:/brick1/dht 49154 Y 31668
Brick gluster-1-2:/brick1/dht 49154 Y 31351
Brick gluster-1-3:/brick1/dht 49154 Y 31667
NFS Server on localhost 2049 Y 31373
NFS Server on 10.0.1.151 2049 Y 31705
NFS Server on gluster-1-3 2049 Y 31677 There are no active volume tasks
[root@gluster-1-2 tools]# [root@gluster-1-2 tools]# netstat -antpu | grep 10.0.1.151
tcp 0 0 10.0.1.152:24007 10.0.1.151:1020 ESTABLISHED 3139/glusterd
tcp 0 0 10.0.1.152:1023 10.0.1.151:24007 ESTABLISHED 3139/glusterd
tcp 0 0 10.0.1.152:49153 10.0.1.151:1016 ESTABLISHED 31245/glusterfsd
tcp 0 0 10.0.1.152:1007 10.0.1.151:49154 ESTABLISHED 31373/glusterfs
tcp 0 0 10.0.1.152:1019 10.0.1.151:49153 ESTABLISHED 31262/glusterfs
tcp 0 0 10.0.1.152:49153 10.0.1.151:1015 ESTABLISHED 31245/glusterfsd
tcp 0 0 10.0.1.152:49154 10.0.1.151:1005 ESTABLISHED 31351/glusterfsd
[root@gluster-1-2 tools]#
性能测试
基本性能
dd if=/dev/zero of=dd.dat bs=1M count=1k
dd if=dd.dat of=/dev/null bs=1M count=1k
带宽测试
iozone -r 1m -s 128m -t 4 -i 0 -i 1
IOPS测试
Fio
OPS测试
Postmark
dd工具测试
客户端写入速度和读取速度测试
[root@gluster-1-3 mnt]# dd if=/dev/zero of=dd.dat bs=1M count=1k
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 36.2987 s, 29.6 MB/s [root@gluster-1-3 mnt]# dd if=dd.dat of=/dev/null bs=1M count=1k
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 2.86975 s, 374 MB/s
[root@gluster-1-3 mnt]# ls
a b c dd.dat
[root@gluster-1-3 mnt]# ls -lh
total 1.0G
-rw-r--r-- 1 root root 0 Feb 10 21:26 a
-rw-r--r-- 1 root root 0 Feb 10 21:26 b
-rw-r--r-- 1 root root 0 Feb 10 21:26 c
-rw-r--r-- 1 root root 1.0G Feb 10 23:03 dd.dat
[root@gluster-1-3 mnt]#
再次测试，虚拟机速度不是很稳定
[root@gluster-1-3 mnt]# dd if=/dev/zero of=/mnt/dd.dat1 bs=1M count=1k
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 17.6375 s, 60.9 MB/s
[root@gluster-1-3 mnt]# ls
aaa dd.dat1
[root@gluster-1-3 mnt]# dd if=/mnt/dd.dat1 of=/dev/null bs=1M count=1k
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 3.12335 s, 344 MB/s
[root@gluster-1-3 mnt]#
iozone工具宽带测试
参数解释
-i # Test to run (0=write/rewrite, 1=read/re-read, 2=random-read/write
3=Read-backwards, 4=Re-write-record, 5=stride-read, 6=fwrite/re-fwrite
7=fread/Re-fread, 8=random_mix, 9=pwrite/Re-pwrite, 10=pread/Re-pread
11=pwritev/Re-pwritev, 12=preadv/Re-preadv)
2是随机写 -r # record size in Kb
or -r #k .. size in Kb
or -r #m .. size in Mb
or -r #g .. size in Gb
-s # file size in Kb
or -s #k .. size in Kb
or -s #m .. size in Mb
or -s #g .. size in Gb
-t # Number of threads or processes to use in throughput test
带宽测试
iozone -r 1m -s 128m -t 4 -i 0 -i 1
测试结果
[root@gluster-1-1 mnt]# iozone -r 1m -s 128m -t 4 -i 0 -i 1
Iozone: Performance Test of File I/O
Version $Revision: 3.394 $
Compiled for 64 bit mode.
Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
Al Slater, Scott Rhine, Mike Wisner, Ken Goss
Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer.
Ben England. Run began: Fri Feb 10 23:13:31 2017 Record Size 1024 KB
File size set to 131072 KB
Command line used: iozone -r 1m -s 128m -t 4 -i 0 -i 1
Output is in Kbytes/sec
Time Resolution = 0.000001 seconds.
Processor cache size set to 1024 Kbytes.
Processor cache line size set to 32 bytes.
File stride size set to 17 * record size.
Throughput test with 4 processes
Each process writes a 131072 Kbyte file in 1024 Kbyte records Children see throughput for 4 initial writers = 232821.23 KB/sec
Parent sees throughput for 4 initial writers = 73057.30 KB/sec
Min throughput per process = 25442.28 KB/sec
Max throughput per process = 98973.52 KB/sec
Avg throughput per process = 58205.31 KB/sec
Min xfer = 68608.00 KB Children see throughput for 4 rewriters = 329695.09 KB/sec
Parent sees throughput for 4 rewriters = 104885.55 KB/sec
Min throughput per process = 65601.57 KB/sec
Max throughput per process = 106135.20 KB/sec
Avg throughput per process = 82423.77 KB/sec
Min xfer = 82944.00 KB Children see throughput for 4 readers = 11668653.50 KB/sec
Parent sees throughput for 4 readers = 11282677.82 KB/sec
Min throughput per process = 2576575.00 KB/sec
Max throughput per process = 3230440.75 KB/sec
Avg throughput per process = 2917163.38 KB/sec
Min xfer = 103424.00 KB Children see throughput for 4 re-readers = 9956129.00 KB/sec
Parent sees throughput for 4 re-readers = 9397866.98 KB/sec
Min throughput per process = 1464638.00 KB/sec
Max throughput per process = 3228923.00 KB/sec
Avg throughput per process = 2489032.25 KB/sec
Min xfer = 48128.00 KB iozone test complete.
[root@gluster-1-1 mnt]#
FIO工具
配置文件说明
[global]
ioengine=libaio
direct=1
thread=1
norandommap=1
randrepeat=0
filename=/mnt/fio.dat 文件写到这里
[rr]
stonewall
group_reporting
bs=4k 块大小
rw=randread 随机读
numjobs=8 8个进程
iodepth=4
写一个配置文件，内容是上面文件
[root@gluster-1-3 ~]# vim fio.conf
[root@gluster-1-3 ~]# cat fio.conf
[global]
ioengine=libaio
direct=1
thread=1
norandommap=1
randrepeat=0
filename=/mnt/fio.dat
[rr]
stonewall
group_reporting
bs=4k
rw=randread
numjobs=8
iodepth=4
[root@gluster-1-3 ~]# 这一次运行报错
[root@gluster-1-3 ~]# fio fio.conf
rr: (g=0): rw=randread, bs=4K-4K/4K-4K/4K-4K, ioengine=libaio, iodepth=4
...
fio-2.1.7
Starting 8 threads
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument
rr: you need to specify size=
fio: pid=0, err=22/file:filesetup.c:793, func=total_file_size, error=Invalid argument Run status group 0 (all jobs):
[root@gluster-1-3 ~]#
再次改动配置，如下
加个size=100m
[root@gluster-1-3 ~]# cat fio.conf
[global]
ioengine=libaio
direct=1
thread=1
norandommap=1
randrepeat=0
filename=/mnt/fio.dat
size=100m
[rr]
stonewall
group_reporting
bs=4k
rw=randread
numjobs=8
iodepth=4
[root@gluster-1-3 ~]#
运行。
[root@gluster-1-3 ~]# fio fio.conf
rr: (g=0): rw=randread, bs=4K-4K/4K-4K/4K-4K, ioengine=libaio, iodepth=4
...
fio-2.1.7
Starting 8 threads
rr: Laying out IO file(s) (1 file(s) / 100MB)
Jobs: 8 (f=8): [rrrrrrrr] [16.2% done] [1878KB/0KB/0KB /s] [469/0/0 iops] [eta 06m:03s] Jobs: 8 (f=8): [rrrrrrrr] [16.6% done] [1828KB/0KB/0KB /s] [457/0/0 iops] [eta 06m:02s]
Jobs: 8 (f=8): [rrrrrrrr] [16.9% done] [2125KB/0KB/0KB /s] [531/0/0 iops] [eta 06m:00s]
Jobs: 8 (f=8): [rrrrrrrr] [17.6% done] [2097KB/0KB/0KB /s] [524/0/0 iops] [eta 05m:56s]
Jobs: 8 (f=8): [rrrrrrrr] [18.1% done] [1784KB/0KB/0KB /s] [446/0/0 iops] [eta 05m:53s] Jobs: 8 (f=8): [rrrrrrrr] [18.3% done] [1850KB/0KB/0KB /s] [462/0/0 iops] [eta 05m:52s] Jobs: 8 (f=8): [rrrrrrrr] [18.6% done] [2031KB/0KB/0KB /s] [507/0/0 iops] [eta 05m:51s] 先用ctrl+c终止掉 ^Cbs: 8 (f=8): [rrrrrrrr] [44.7% done] [2041KB/0KB/0KB /s] [510/0/0 iops] [eta 04m:00s]
fio: terminating on signal 2 rr: (groupid=0, jobs=8): err= 0: pid=31821: Fri Feb 10 23:29:04 2017
read : io=375372KB, bw=1937.8KB/s, iops=484, runt=193716msec
slat (usec): min=334, max=266210, avg=16504.09, stdev=19351.15
clat (usec): min=1, max=324872, avg=49528.02, stdev=33714.50
lat (msec): min=2, max=352, avg=66.03, stdev=39.05
clat percentiles (msec):
| 1.00th=[ 4], 5.00th=[ 10], 10.00th=[ 15], 20.00th=[ 22],
| 30.00th=[ 29], 40.00th=[ 36], 50.00th=[ 43], 60.00th=[ 51],
| 70.00th=[ 61], 80.00th=[ 74], 90.00th=[ 95], 95.00th=[ 115],
| 99.00th=[ 159], 99.50th=[ 180], 99.90th=[ 225], 99.95th=[ 245],
| 99.99th=[ 281]
bw (KB /s): min= 106, max= 488, per=12.51%, avg=242.37, stdev=54.98
lat (usec) : 2=0.01%, 4=0.01%, 10=0.01%
lat (msec) : 2=0.04%, 4=0.96%, 10=4.39%, 20=12.12%, 50=42.19%
lat (msec) : 100=32.04%, 250=8.21%, 500=0.04%
cpu : usr=0.01%, sys=0.35%, ctx=93892, majf=0, minf=48
IO depths : 1=0.1%, 2=0.1%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
issued : total=r=93843/w=0/d=0, short=r=0/w=0/d=0
latency : target=0, window=0, percentile=100.00%, depth=4 Run status group 0 (all jobs):
READ: io=375372KB, aggrb=1937KB/s, minb=1937KB/s, maxb=1937KB/s, mint=193716msec, maxt=193716msec
[root@gluster-1-3 ~]#
读测试
[root@gluster-1-3 ~]# cat fio.conf
[global]
ioengine=libaio
direct=1
thread=1
norandommap=1
randrepeat=0
filename=/mnt/fio.dat
size=100m
[rr]
stonewall
group_reporting
bs=4k
rw=read
numjobs=8
iodepth=4
[root@gluster-1-3 ~]# 这是顺序读的
[root@gluster-1-3 ~]# fio fio.conf
rr: (g=0): rw=read, bs=4K-4K/4K-4K/4K-4K, ioengine=libaio, iodepth=4
...
fio-2.1.7
Starting 8 threads
fio: pid=31840, err=9/file:ioengines.c:395, func=io commit, error=Bad file descriptor
Jobs: 7 (f=7): [RRXRRRRR] [97.0% done] [19752KB/0KB/0KB /s] [4938/0/0 iops] [eta 00m:01s]
rr: (groupid=0, jobs=8): err= 9 (file:ioengines.c:395, func=io commit, error=Bad file descriptor): pid=31838: Fri Feb 10 23:30:55 2017
read : io=716800KB, bw=23025KB/s, iops=5756, runt= 31131msec
slat (usec): min=372, max=63173, avg=1198.24, stdev=1656.16
clat (usec): min=2, max=71395, avg=3602.91, stdev=3045.37
lat (usec): min=517, max=73189, avg=4801.87, stdev=3615.83
clat percentiles (usec):
| 1.00th=[ 2008], 5.00th=[ 2352], 10.00th=[ 2448], 20.00th=[ 2608],
| 30.00th=[ 2704], 40.00th=[ 2800], 50.00th=[ 2896], 60.00th=[ 2992],
| 70.00th=[ 3120], 80.00th=[ 3344], 90.00th=[ 3984], 95.00th=[ 9792],
| 99.00th=[18304], 99.50th=[23424], 99.90th=[32640], 99.95th=[37632],
| 99.99th=[49408]
bw (KB /s): min= 1840, max= 6016, per=14.42%, avg=3321.34, stdev=374.60
lat (usec) : 4=0.01%, 750=0.01%, 1000=0.01%
lat (msec) : 2=0.97%, 4=89.11%, 10=5.00%, 20=4.18%, 50=0.73%
lat (msec) : 100=0.01%
cpu : usr=0.24%, sys=2.07%, ctx=179303, majf=0, minf=38
IO depths : 1=0.1%, 2=0.1%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.1%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
issued : total=r=179201/w=0/d=0, short=r=0/w=0/d=0
latency : target=0, window=0, percentile=100.00%, depth=4 Run status group 0 (all jobs):
READ: io=716800KB, aggrb=23025KB/s, minb=23025KB/s, maxb=23025KB/s, mint=31131msec, maxt=31131msec
[root@gluster-1-3 ~]#
改成写的运行，这都是虚拟机虚高的，一般sata磁盘是80MB左右，sas盘 150MB左右。
[root@gluster-1-3 ~]# cat fio.conf
[global]
ioengine=libaio
direct=1
thread=1
norandommap=1
randrepeat=0
filename=/mnt/fio.dat
size=100m
[rr]
stonewall
group_reporting
bs=4k
rw=write
numjobs=8
iodepth=4
[root@gluster-1-3 ~]# fio fio.conf
rr: (g=0): rw=write, bs=4K-4K/4K-4K/4K-4K, ioengine=libaio, iodepth=4
...
fio-2.1.7
Starting 8 threads
^Cbs: 5 (f=5): [W_W_W_WW] [8.5% done] [0KB/27744KB/0KB /s] [0/6936/0 iops] [eta 01m:48s]
fio: terminating on signal 2 rr: (groupid=0, jobs=8): err= 0: pid=31851: Fri Feb 10 23:32:42 2017
write: io=401704KB, bw=49036KB/s, iops=12259, runt= 8192msec
slat (usec): min=42, max=2211.3K, avg=555.55, stdev=22865.93
clat (usec): min=1, max=3136.8K, avg=1671.44, stdev=43867.76
lat (usec): min=47, max=3138.5K, avg=2227.89, stdev=51372.35
clat percentiles (usec):
| 1.00th=[ 139], 5.00th=[ 141], 10.00th=[ 143], 20.00th=[ 149],
| 30.00th=[ 165], 40.00th=[ 183], 50.00th=[ 199], 60.00th=[ 223],
| 70.00th=[ 258], 80.00th=[ 338], 90.00th=[ 442], 95.00th=[ 556],
| 99.00th=[17280], 99.50th=[28032], 99.90th=[60160], 99.95th=[528384],
| 99.99th=[2211840]
bw (KB /s): min= 2, max=61688, per=23.77%, avg=11655.21, stdev=20767.75
lat (usec) : 2=0.01%, 4=0.01%, 50=0.01%, 100=0.01%, 250=68.15%
lat (usec) : 500=25.00%, 750=3.28%, 1000=0.20%
lat (msec) : 2=0.16%, 4=0.49%, 10=1.02%, 20=0.88%, 50=0.67%
lat (msec) : 100=0.08%, 750=0.01%, 2000=0.03%, >=2000=0.01%
cpu : usr=0.55%, sys=4.00%, ctx=301450, majf=0, minf=7
IO depths : 1=0.1%, 2=0.1%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
issued : total=r=0/w=100426/d=0, short=r=0/w=0/d=0
latency : target=0, window=0, percentile=100.00%, depth=4 Run status group 0 (all jobs):
WRITE: io=401704KB, aggrb=49036KB/s, minb=49036KB/s, maxb=49036KB/s, mint=8192msec, maxt=8192msec
[root@gluster-1-3 ~]#
postmark工具
参数解释
set size 1k 每个文件1k
set number 10000 写1万个文件
set location /mnt/
set subdirectories 100 分成100个目录写
set read 1k
set write 1k
run 60 运行60秒
运行200秒，让它自动退出
[root@gluster-1-3 ~]# cat postmark.conf
set size 1k
set number 10000
set location /mnt/
set subdirectories 100
set read 1k
set write 1k
run 200
quit
[root@gluster-1-3 ~]# 新开一个窗口可以看到创建的目录，创建100个目录，每个目录下面创建100个文件
[root@gluster-1-3 mnt]# ls
aaa s11 s17 s22 s28 s33 s39 s44 s5 s55 s60 s66 s71 s77 s82 s88 s93 s99
dd.dat1 s12 s18 s23 s29 s34 s4 s45 s50 s56 s61 s67 s72 s78 s83 s89 s94
fio.dat s13 s19 s24 s3 s35 s40 s46 s51 s57 s62 s68 s73 s79 s84 s9 s95
s0 s14 s2 s25 s30 s36 s41 s47 s52 s58 s63 s69 s74 s8 s85 s90 s96
s1 s15 s20 s26 s31 s37 s42 s48 s53 s59 s64 s7 s75 s80 s86 s91 s97
s10 s16 s21 s27 s32 s38 s43 s49 s54 s6 s65 s70 s76 s81 s87 s92 s98
[root@gluster-1-3 mnt]#
可以查看帮助
[root@gluster-1-3 ~]# postmark
PostMark v1.51 : 8/14/01
pm>help
set size - Sets low and high bounds of files
set number - Sets number of simultaneous files
set seed - Sets seed for random number generator
set transactions - Sets number of transactions
set location - Sets location of working files
set subdirectories - Sets number of subdirectories
set read - Sets read block size
set write - Sets write block size
set buffering - Sets usage of buffered I/O
set bias read - Sets the chance of choosing read over append
set bias create - Sets the chance of choosing create over delete
set report - Choose verbose or terse report format
run - Runs one iteration of benchmark
load - Read configuration file
show - Displays current configuration
help - Prints out available commands
quit - Exit program
pm>
也可以在这里一行行的输入命令然后执行
pm>set size 1k
pm>set number 10000
pm>set location /mnt
pm>set subdirectories 100
pm>run 200
Creating subdirectories...Done
Creating files...
运行完，它会在当前目录下生成一个时间为名字的报告文件，比如这里是200
[root@gluster-1-3 ~]# cat 200
Time:
35 seconds total
1 seconds of transactions (500 per second) Files:
10258 created (293 per second)
Creation alone: 10000 files (400 per second)
Mixed with transactions: 258 files (258 per second)
244 read (244 per second)
0 appended (0 per second)
10258 deleted (293 per second)
Deletion alone: 10016 files (1112 per second)
Mixed with transactions: 242 files (242 per second) Data:
0.24 kilobytes read (0.01 kilobytes per second)
10.02 kilobytes written (0.29 kilobytes per second)
Time:
33 seconds total
1 seconds of transactions (500 per second) Files:
10258 created (310 per second) #每秒创建多少
Creation alone: 10000 files (416 per second)
Mixed with transactions: 258 files (258 per second)
244 read (244 per second)
0 appended (0 per second)
10258 deleted (310 per second) #每秒删除多少
Deletion alone: 10016 files (1252 per second)
Mixed with transactions: 242 files (242 per second) Data:
0.24 kilobytes read (0.01 kilobytes per second)
10.02 kilobytes written (0.30 kilobytes per second)
[root@gluster-1-3 ~]#
系统监控
系统负载
存储空间
GlusterFS状态
系统日志
atop工具
可以查看系统当前实时的一些指标
PRC | sys 4m19s | user 48.84s | #proc 140 | #tslpu 0 | #zombie 0 | #exit 0 |
CPU | sys 1% | user 0% | irq 0% | idle 398% | wait 1% | curscal ?% |
cpu | sys 0% | user 0% | irq 0% | idle 99% | cpu000 w 0% | curscal ?% |
cpu | sys 0% | user 0% | irq 0% | idle 99% | cpu003 w 0% | curscal ?% |
cpu | sys 0% | user 0% | irq 0% | idle 100% | cpu002 w 0% | curscal ?% |
cpu | sys 0% | user 0% | irq 0% | idle 100% | cpu001 w 0% | curscal ?% |
CPL | avg1 0.00 | avg5 0.00 | avg15 0.00 | csw 6281744 | intr 4782073 | numcpu 4 |
MEM | tot 1.9G | free 1.1G | cache 376.0M | dirty 0.0M | buff 96.3M | slab 118.6M |
SWP | tot 4.0G | free 4.0G | | | vmcom 618.2M | vmlim 5.0G |
PAG | scan 119296 | steal 116494 | stall 0 | | swin 0 | swout 0 |
DSK | sda | busy 1% | read 42778 | write 27793 | MBw/s 0.03 | avio 2.56 ms |
DSK | sdb | busy 0% | read 556 | write 2746 | MBw/s 0.02 | avio 6.05 ms |
NET | transport | tcpi 1136211 | tcpo 1329001 | udpi 657 | udpo 848 | tcpao 1507 |
NET | network | ipi 1141696 | ipo 1329910 | ipfrw 0 | deliv 1142e3 | icmpo 23 |
NET | eth0 0% | pcki 2815911 | pcko 3522252 | si 1127 Kbps | so 1275 Kbps | erro 0 |
NET | eth1 0% | pcki 1000 | pcko 14 | si 0 Kbps | so 0 Kbps | erro 0 |
NET | lo ---- | pcki 258711 | pcko 258711 | si 21 Kbps | so 21 Kbps | erro 0 |
*** system and process activity since boot ***
PID TID RUID THR SYSCPU USRCPU VGROW RGROW RDDSK WRDSK ST EXC S CPUNR CPU CMD 1/16
31779 - root 7 2m07s 15.85s 296.0M 46900K 1016K 400K N- - S 0 1% glusterfs
19 - root 1 46.08s 0.00s 0K 0K 0K 0K N- - S 0 0% events/0
1390 - root 2 19.36s 20.70s 172.9M 7740K 3952K 24K N- - S 3 0% vmtoolsd
31667 - root 8 16.96s 0.81s 471.9M 26964K 12K 41104K N- - S 0 0% glusterfsd
1569 - root 3 4.92s 8.32s 199.2M 5232K 896K 16K N- - S 1 0% ManagementAgen
1863 - root 1 5.37s 0.63s 18372K 720K 0K 4K N- - S 0 0% irqbalance
36 - root 1 4.87s 0.00s 0K 0K 0K 0K N- - S 2 0% kblockd/2
21 - root 1 3.47s 0.00s 0K 0K 0K 0K N- - S 2 0% events/2
330 - root 1 3.41s 0.00s 0K 0K 0K 38820K N- - S 3 0% jbd2/sda3-8
可以先运行postmark，然后这边使用atop监控，对照
GlusterFS配置信息和日志
3.2.x版本
配置信息： /etc/glusterd/
日志： /var/log/glusterfs
3.4版本
配置信息： /var/lib/glusterd
日志： /var/log/glusterfs
查看日志
[root@gluster-1-3 ~]# cd /var/log/glusterfs/
[root@gluster-1-3 glusterfs]# ls
bricks cli.log etc-glusterfs-glusterd.vol.log glustershd.log mnt.log nfs.log testvol-rebalance.log
[root@gluster-1-3 glusterfs]# cd bricks/
[root@gluster-1-3 bricks]# ls
brick1-b3.log brick1-dht.log 下面的大写字母 I 表示info级别的日志
[root@gluster-1-3 bricks]# tail -10 brick1-dht.log +------------------------------------------------------------------------------+
[2017-02-10 14:44:32.137312] I [server-handshake.c:567:server_setvolume] 0-dhtvol-server: accepted client from gluster-1-3-31676-2017/02/10-14:44:32:63735-dhtvol-client-2-0 (version: 3.4.2)
[2017-02-10 14:44:33.227536] I [server-handshake.c:567:server_setvolume] 0-dhtvol-server: accepted client from gluster-1-2-31372-2017/02/10-14:44:33:130279-dhtvol-client-2-0 (version: 3.4.2)
[2017-02-10 14:44:33.349065] I [server-handshake.c:567:server_setvolume] 0-dhtvol-server: accepted client from gluster-1-3-31632-2017/02/10-14:42:40:76203-dhtvol-client-2-2 (version: 3.4.2)
[2017-02-10 14:44:33.358599] I [server-handshake.c:567:server_setvolume] 0-dhtvol-server: accepted client from gluster-1-1-31704-2017/02/10-14:44:33:289254-dhtvol-client-2-0 (version: 3.4.2)
[2017-02-10 15:06:44.426731] I [server-handshake.c:567:server_setvolume] 0-dhtvol-server: accepted client from gluster-1-3-31777-2017/02/10-15:06:44:351469-dhtvol-client-2-0 (version: 3.4.2)
[2017-02-10 15:06:48.693234] I [server.c:762:server_rpc_notify] 0-dhtvol-server: disconnecting connectionfrom gluster-1-3-31632-2017/02/10-14:42:40:76203-dhtvol-client-2-2
[2017-02-10 15:06:48.693299] I [server-helpers.c:729:server_connection_put] 0-dhtvol-server: Shutting down connection gluster-1-3-31632-2017/02/10-14:42:40:76203-dhtvol-client-2-2
[2017-02-10 15:06:48.693351] I [server-helpers.c:617:server_connection_destroy] 0-dhtvol-server: destroyed connection of gluster-1-3-31632-2017/02/10-14:42:40:76203-dhtvol-client-2-2
[root@gluster-1-3 bricks]#
glusterfs集群典型故障处理
1、复制卷数据不一致
故障现象：双副本卷数据出现不一致
故障模拟：删除其中一个brick数据
修复方法
触发自修复：遍历并访问文件
find /mnt -type f -print0 | xargs -0 head -c1
挂载复制卷
[root@gluster-1-3 bricks]# mkdir /rep
[root@gluster-1-3 bricks]# mount -t glusterfs gluster-1-1:/testvol /rep
[root@gluster-1-3 bricks]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 35G 4.2G 30G 13% /
tmpfs 996M 0 996M 0% /dev/shm
/dev/sda1 380M 33M 327M 10% /boot
/dev/sdb 9.8G 62M 9.2G 1% /brick1
gluster-1-1:/dhtvol 30G 3.3G 25G 12% /mnt
gluster-1-1:/testvol 9.8G 2.2G 7.1G 24% /rep
[root@gluster-1-3 bricks]#
模拟问题。在gluster-1-1机器上删除文件
[root@gluster-1-1 ~]# cd /brick1/b1/
[root@gluster-1-1 b1]# ls
a b c dd.dat
[root@gluster-1-1 b1]# rm -f a
[root@gluster-1-1 b1]# ls
b c dd.dat
[root@gluster-1-1 b1]#
gluster-1-2机器上有文件
[root@gluster-1-2 ~]# ls /brick1/b2/
a b c dd.dat
[root@gluster-1-2 ~]# 访问文件可以触发文件的自动修复
[root@gluster-1-3 bricks]# ls /rep/
a b c dd.dat
[root@gluster-1-3 bricks]# cat /rep/a
[root@gluster-1-3 bricks]# cat /rep/a
[root@gluster-1-3 bricks]#
自动修复了
[root@gluster-1-1 b1]# ls
b c dd.dat
[root@gluster-1-1 b1]# ls
a b c dd.dat
[root@gluster-1-1 b1]#
通过遍历挂载点，访问文件也可以触发，下面这种是批量遍历。不过我通过下面命令测试没成功
find /rep -type f -print0 | xargs -0 head -c1
2、glusterfs集群节点配置信息不正确
故障模拟
删除server2部分配置信息
配置信息位置： /var/lib/glusterd/
修复方法
触发自修复：通过Gluster工具同步配置信息
Gluster volume sync server1 all
恢复复制卷 brick
故障现象：双副本卷中一个brick损坏
恢复流程
1、重新建立故障brick目录
setfattr -n trusted.gfid -v
0x00000000000000000000000000000001 /data2
setfattr -n trusted.glusterfs.dht -v
0x000000010000000000000000ffffffff /data2
setfattr -n trusted.glusterfs.volume-id -v
0xcc51d546c0af4215a72077ad9378c2ac /data2
-v 的参数设置成你的值
2、设置扩展属性(参考另一个复制 brick)
3、重启 glusterd服务
4、触发数据自修复
find /mntpoint -type f -print0 | xargs -0 head -c1 >/dev/null
模拟删除brick的操作
[root@gluster-1-1 b1]# gluster volume info testvol Volume Name: testvol
Type: Replicate
Volume ID: 1fa96ed0-a062-4ccf-9e4f-07cb9d84296f
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster-1-1:/brick1/b1
Brick2: gluster-1-2:/brick1/b2
Options Reconfigured:
nfs.disable: on
auth.allow: 10.0.* [root@gluster-1-2 ~]# ls /brick1/b2/
a b c dd.dat
[root@gluster-1-2 ~]# rm -rf /brick1/b2/
[root@gluster-1-2 ~]# ls /brick1/b2
ls: cannot access /brick1/b2: No such file or directory
[root@gluster-1-2 ~]#
1、节点1上操作，获取扩展属性
[root@gluster-1-1 b1]# cd /brick1/
[root@gluster-1-1 brick1]# getfattr -d -m . -e hex b1/
# file: b1/
trusted.afr.testvol-client-0=0x000000000000000000000000
trusted.afr.testvol-client-1=0x000000000000000000000001
trusted.gfid=0x00000000000000000000000000000001
trusted.glusterfs.dht=0x000000010000000000000000ffffffff
trusted.glusterfs.volume-id=0x1fa96ed0a0624ccf9e4f07cb9d84296f [root@gluster-1-1 brick1]#
2、重新建立故障brick目录
恢复操作，扩展属性可以从gluster-1-1机器上获取的复制，执行顺序没关系
[root@gluster-1-2 brick1]# mkdir b2
[root@gluster-1-2 brick1]# getfattr -d -m . -e hex b2
[root@gluster-1-2 brick1]# setfattr -n trusted.glusterfs.volume-id -v 0x1fa96ed0a0624ccf9e4f07cb9d84296f b2
[root@gluster-1-2 brick1]# getfattr -d -m . -e hex b2
# file: b2
trusted.glusterfs.volume-id=0x1fa96ed0a0624ccf9e4f07cb9d84296f [root@gluster-1-2 brick1]# setfattr -n trusted.gfid -v 0x00000000000000000000000000000001 b2
[root@gluster-1-2 brick1]# setfattr -n trusted.glusterfs.dht -v 0x000000010000000000000000ffffffff b2
[root@gluster-1-2 brick1]# getfattr -d -m . -e hex b2
# file: b2
trusted.gfid=0x00000000000000000000000000000001
trusted.glusterfs.dht=0x000000010000000000000000ffffffff
trusted.glusterfs.volume-id=0x1fa96ed0a0624ccf9e4f07cb9d84296f [root@gluster-1-2 brick1]# 重启服务
[root@gluster-1-2 brick1]# /etc/init.d/glusterd restart
Starting glusterd: [ OK ]
[root@gluster-1-2 brick1]# ls /brick1/b2/
[root@gluster-1-2 brick1]# ls /brick1/b2/
3、我这边测试重启服务都没生效。在挂载点cat文件，gluster-1-2机器也没出现gluster-1-1机器上的文件
最后是重启testvol服务解决的
[root@gluster-1-2 b2]# gluster volume stop testvol
Stopping volume will make its data inaccessible. Do you want to continue? (y/n) y
volume stop: testvol: success
[root@gluster-1-2 b2]# gluster volume start testvol
volume start: testvol: success
[root@gluster-1-2 b2]# ls
44 a b c f
[root@gluster-1-2 b2]#
glusterfs集群生产场景调优精要
系统关键考虑
性能需求
Read/Write
吞吐量/IOPS/可用性
Workload
什么应用？
大文件？
小文件？
除了吞吐量之外的需求？ 系统规模和架构
性能理论上由硬件配置决定
CPU/Mem/Disk/Network
系统规模由性能和容量需求决定
2U/4U存储服务器和JBOD适合构建Brick
三种典型应用部署
容量需求应用
2U/4U存储服务器+多个JBOD
CPU/RAM/Network要求低
性能和容量混合需求应用
2U/4U存储服务器+少数JBOD
高 CPU/RAM，低Network
性能需求应用
1U/2U存储服务器(无JBOD)
高 CPU/RAM，快DISK/Network 系统配置
根据Workload选择适当的 Volume类型
Volume类型
DHT – 高性能，无冗余
AFR – 高可用，读性能高
STP – 高并发读，写性能低，无冗余
协议/性能
Native – 性能最优
NFS – 特定应用下可获得最优性能
CIFS – 仅Windows平台使用
数据流
不同访问协议的数据流差异 hash+复制是生产必须的
mount 系统硬件配置
节点和集群配置
多 CPU－支持更多的并发线程
多 MEM－支持更大的 Cache
多网络端口－支持更高的吞吐量
专用后端网络用于集群内部通信
NFS/CIFS协议访问需要专用后端网络
推荐至少10GbE
Native协议用于内部节点通信 性能相关经验
GlusterFS性能很大程度上依赖硬件
充分理解应用基础上进行硬件配置
缺省参数主要用于通用目的
GlusterFS存在若干性能调优参数
性能问题应当优先排除磁盘和网络故障 建议6到8个磁盘最做一个raid 系统调优
关键调优参数
Performance.write-behind-window-size 65535 (字节)
Performance.cache-refresh-timeout 1 (秒)
Performance.cache-size 1073741824 (字节)
Performance.read-ahead off (仅1GbE)
Performance.io-thread-count 24 (CPU核数)
Performance.client-io-threads on (客户端)
performance.write-behind on
performance.flush-behind on
cluster.stripe-block-size 4MB (缺省 128KB)
Nfs.disable off (缺省打开)
缺省参数设置适用于混合workloads
不同应用调优
理解硬件/固件配置及对性能的影响
如CPU频率、 IB、 10GbE、 TCP offload KVM优化
使用 QEMU-GlusterFS(libgfapi)整合方案
gluster volume set <volume> group virt
tuned-adm profile rhs-virtualization
KVM host: tuned-adm profile virtual-host
Images和应用数据使用不同的 volume
每个gluster节点不超过2个KVM Host (16 guest/host)
提高响应时间
减少/sys/block/vda/queue/nr_request
Server/Guest： 128/8 (缺省企值256/128)
提高读带宽
提高 /sys/block/vda/queue/read_ahead_kb
VM readahead： 4096 (缺省值128)