[算法]检测空间三角形相交算法(Devillers & Guigue算法)

#pragma once
//GYDevillersTriangle.h
/*      快速检测空间三角形相交算法的代码实现(Devillers & Guigue算法)
博客原地址:http://blog.csdn.net/fourierfeng/article/details/11969915#

Devillers & Guigue算法(简称Devillers 算法) 通过三角形各顶点构成的行列式正负的几何意义来判断三角形中点、线、面之间的相对位置关系,
从而判断两三角形是否相交。其基本原理如下:给定空间四个点：a(ax, ay, az), b = (bx, by, bz), c = (cx, cy, cz), d = (dx, dy, dz), 定义行列式如下：

[a, b, c, d] 采用右手螺旋法则定义了四个空间点的位置关系。
[a, b, c, d] > 0 表示 d 在 a、b、c 按逆时针顺序所组成的三角形的正法线方向(即上方);
[a, b, c, d] < 0 表示 d 在 △abc的下方; [a, b, c, d] = 0 表示四点共面。

        设两个三角形T1和T2，顶点分别为：V10，V11，V12和V20，V21，V22，
    三角形所在的平面分别为π1和π2，其法向量分别为N1和N2.算法先判别三角形和另一个三角形所在的平面的相互位置关系, 提前排除不相交的情况。
    通过计算[V20, V21, V22, V1i].(i = 0, 1, 2)来判断T1和π2的关系：如果所有的行列式的值都不为零且同号，则T1和T2不相交；否则T1和π2相交。
    相交又分为如下几种情况：
        a)如果所有的行列式的值为零，则T1和T2共面，转化为共面的线段相交问题。
        b)如果其中一个行列式的值为零，而其他两个行列式同号，则只有一个点在平面内，测试顶点是否则T2内部，是则相交，否则不相交；
        c)否则T1的顶点位于平面π2两侧(包含T1的一条边在平面π2中的情况)。

        再按照类似的方法对 T 2 和 π 1 作进一步的测试。如果通过测试, 则每个三角形必有确定的一点位于另一个三角形所在平面的一侧,
    而另外两点位于其另一侧。算法分别循环置换每个三角形的顶点, 以使V10(V20)位于π2(π1)的一侧，另两个点位于其另一侧；
    同时对顶点V21，V22(V11, V12)进行交换操作，以确保V10(V20)位于π2(π1)的上方，即正法线方向。
    经过以上的预排除和置换操作，V10的邻边V10V11，V10V12和V20的邻边V20V21和V20V22与两平面的交线L相交于固定形式的点上，
    分别记为i，j，k，l(i<j, k<l), 如图：(参看原博客)
    这些点在L上形成的封闭区间为i1 = [i, j], i2 = [k, l].至此，两个三角形的相交测试问题转换为封闭区间i1，i2的重叠问题。
    若重叠则相交，否则不相交。由于交点形式固定，只需满足条件k <= j且i <= l即表明区间重叠，条件还可进一步缩减为判别式
    (1)是否成立：
                [V10, V11, V20, V21] <= 0 && [V10, V12, V22, V20] <= 0        判别式(1)
*/

typedef float float3[];

enum TopologicalStructure
{
    INTERSECT, NONINTERSECT
};

struct Triangle
{
    //float3 Normal_0;
    float3 Vertex_1, Vertex_2, Vertex_3;
};

/*******************************************************************************************************/
//Devillers算法主函数
TopologicalStructure judge_triangle_topologicalStructure(Triangle* tri1, Triangle* tri2);

//返回bool值
bool isTriangleTntersect(Triangle* tri1, Triangle* tri2)
{
    TopologicalStructure  intersectSt = judge_triangle_topologicalStructure(tri1, tri2);
    if (intersectSt == INTERSECT)
        return true;
    return false;
}

//GYDevillersTriangle.cpp
#include "GYDevillersTriangle.h"
#pragma once

struct point
{
    float x, y;
};

//三维点拷贝为二维点
static void copy_point(point& p, float3 f)
{
    p.x = f[];
    p.y = f[];
}

//四点行列式
inline float get_vector4_det(float3 v1, float3 v2, float3 v3, float3 v4)
{
    float a[][];
    for (int i = ; i != ; ++i)
    {
        a[][i] = v1[i] - v4[i];
        a[][i] = v2[i] - v4[i];
        a[][i] = v3[i] - v4[i];
    }

    return a[][] * a[][] * a[][]
        + a[][] * a[][] * a[][]
        + a[][] * a[][] * a[][]
        - a[][] * a[][] * a[][]
        - a[][] * a[][] * a[][]
        - a[][] * a[][] * a[][];
}

//利用叉积计算点p相对线段p1p2的方位
inline double direction(point p1, point p2, point p) {
    return (p.x - p1.x) * (p2.y - p1.y) - (p2.x - p1.x) * (p.y - p1.y);
}

//确定与线段p1p2共线的点p是否在线段p1p2上
inline int on_segment(point p1, point p2, point p) {
    double max = p1.x > p2.x ? p1.x : p2.x;
    double min = p1.x < p2.x ? p1.x : p2.x;
    double max1 = p1.y > p2.y ? p1.y : p2.y;
    double min1 = p1.y < p2.y ? p1.y : p2.y;
    if (p.x >= min && p.x <= max && p.y >= min1 && p.y <= max1)
    {
        return ;
    }
    else
    {
        return ;
    }
}

//判断线段p1p2与线段p3p4是否相交的主函数
inline int segments_intersert(point p1, point p2, point p3, point p4) {
    double d1, d2, d3, d4;
    d1 = direction(p3, p4, p1);
    d2 = direction(p3, p4, p2);
    d3 = direction(p1, p2, p3);
    d4 = direction(p1, p2, p4);
    if (d1 * d2 <  && d3 * d4 < )
    {
        return ;
    }
    else if (d1 ==  && on_segment(p3, p4, p1) == )
    {
        return ;
    }
    else if (d2 ==  && on_segment(p3, p4, p2) == )
    {
        return ;
    }
    else if (d3 ==  && on_segment(p1, p2, p3) == )
    {
        return ;
    }
    else if (d4 ==  && on_segment(p1, p2, p4) == )
    {
        return ;
    }
    return ;
}

//判断同一平面的直线和三角形是否相交
inline bool line_triangle_intersert_inSamePlane(Triangle* tri, float3 f1, float3 f2)
{
    point p1, p2, p3, p4;

    copy_point(p1, f1);

    copy_point(p2, f2);

    copy_point(p3, tri->Vertex_1);

    copy_point(p4, tri->Vertex_2);

    if (segments_intersert(p1, p2, p3, p4))
    {
        return true;
    }

    copy_point(p3, tri->Vertex_2);

    copy_point(p4, tri->Vertex_3);

    if (segments_intersert(p1, p2, p3, p4))
    {
        return true;
    }

    copy_point(p3, tri->Vertex_1);

    copy_point(p4, tri->Vertex_3);

    if (segments_intersert(p1, p2, p3, p4))
    {
        return true;
    }

    return false;
}

inline void get_central_point(float3 centralPoint, Triangle* tri)
{
    centralPoint[] = (tri->Vertex_1[] + tri->Vertex_2[] + tri->Vertex_3[]) / ;

    centralPoint[] = (tri->Vertex_1[] + tri->Vertex_2[] + tri->Vertex_3[]) / ;

    centralPoint[] = (tri->Vertex_1[] + tri->Vertex_2[] + tri->Vertex_3[]) / ;
}

//向量之差
inline void get_vector_diff(float3& aimV, const float3 a, const float3 b)
{
    aimV[] = b[] - a[];

    aimV[] = b[] - a[];

    aimV[] = b[] - a[];
}

//向量内积
inline float Dot(const float3& v1, const float3& v2)
{
    return v1[] * v2[] + v1[] * v2[] + v1[] * v2[];
}

//重心法判断点是否在三角形内部
inline bool is_point_within_triangle(Triangle* tri, float3 point)
{
    float3 v0;
    get_vector_diff(v0, tri->Vertex_1, tri->Vertex_3);
    float3 v1;
    get_vector_diff(v1, tri->Vertex_1, tri->Vertex_2);
    float3 v2;
    get_vector_diff(v2, tri->Vertex_1, point);
    float dot00 = Dot(v0, v0);
    float dot01 = Dot(v0, v1);
    float dot02 = Dot(v0, v2);
    float dot11 = Dot(v1, v1);
    float dot12 = Dot(v1, v2);
    float inverDeno =  / (dot00* dot11 - dot01* dot01);
    float u = (dot11* dot02 - dot01* dot12) * inverDeno;
    if (u <  || u > ) // if u out of range, return directly
    {
        return false;
    }
    float v = (dot00* dot12 - dot01* dot02) * inverDeno;
    if (v <  || v > ) // if v out of range, return directly
    {
        return false;
    }
    return u + v <= ;
}

//判断同一平面内的三角形是否相交
inline bool triangle_intersert_inSamePlane(Triangle* tri1, Triangle* tri2)
{
    if (line_triangle_intersert_inSamePlane(tri2, tri1->Vertex_1, tri1->Vertex_2))
    {
        return true;
    }
    else if (line_triangle_intersert_inSamePlane(tri2, tri1->Vertex_2, tri1->Vertex_3))
    {
        return true;
    }
    else if (line_triangle_intersert_inSamePlane(tri2, tri1->Vertex_1, tri1->Vertex_3))
    {
        return true;
    }
    else
    {
        float3 centralPoint1, centralPoint2;

        get_central_point(centralPoint1, tri1);

        get_central_point(centralPoint2, tri2);

        if (is_point_within_triangle(tri2, centralPoint1) || is_point_within_triangle(tri1, centralPoint2))
        {
            return true;
        }

        return false;
    }
}

//Devillers算法主函数
TopologicalStructure judge_triangle_topologicalStructure(Triangle* tri1, Triangle* tri2)
{
    //设tri1所在的平面为p1,tri2所在的平面为p2
    float p1_tri2_vertex1 = get_vector4_det(tri1->Vertex_1, tri1->Vertex_2, tri1->Vertex_3, tri2->Vertex_1);

    float p1_tri2_vertex2 = get_vector4_det(tri1->Vertex_1, tri1->Vertex_2, tri1->Vertex_3, tri2->Vertex_2);

    float p1_tri2_vertex3 = get_vector4_det(tri1->Vertex_1, tri1->Vertex_2, tri1->Vertex_3, tri2->Vertex_3);

    if (p1_tri2_vertex1 >  && p1_tri2_vertex2 >  && p1_tri2_vertex3 > )
    {
        return NONINTERSECT;
    }

    if (p1_tri2_vertex1 <  && p1_tri2_vertex2 <  && p1_tri2_vertex3 < )
    {
        return NONINTERSECT;
    }

    if (p1_tri2_vertex1 ==  && p1_tri2_vertex2 ==  && p1_tri2_vertex3 == )
    {
        if (triangle_intersert_inSamePlane(tri1, tri2))
        {
            return INTERSECT;
        }
        else
        {
            return NONINTERSECT;
        }
    }

    if (p1_tri2_vertex1 ==  && p1_tri2_vertex2 * p1_tri2_vertex3 > )
    {
        if (is_point_within_triangle(tri1, tri2->Vertex_1))
        {
            return INTERSECT;
        }
        else
        {
            return NONINTERSECT;
        }
    }
    else if (p1_tri2_vertex2 ==  && p1_tri2_vertex1 * p1_tri2_vertex3 > )
    {
        if (is_point_within_triangle(tri1, tri2->Vertex_2))
        {
            return INTERSECT;
        }
        else
        {
            return NONINTERSECT;
        }
    }
    else if (p1_tri2_vertex3 ==  && p1_tri2_vertex1 * p1_tri2_vertex2 > )
    {
        if (is_point_within_triangle(tri1, tri2->Vertex_3))
        {
            return INTERSECT;
        }
        else
        {
            return NONINTERSECT;
        }
    }

    float p2_tri1_vertex1 = get_vector4_det(tri2->Vertex_1, tri2->Vertex_2, tri2->Vertex_3, tri1->Vertex_1);

    float p2_tri1_vertex2 = get_vector4_det(tri2->Vertex_1, tri2->Vertex_2, tri2->Vertex_3, tri1->Vertex_2);

    float p2_tri1_vertex3 = get_vector4_det(tri2->Vertex_1, tri2->Vertex_2, tri2->Vertex_3, tri1->Vertex_3);

    if (p2_tri1_vertex1 >  && p2_tri1_vertex2 >  && p2_tri1_vertex3 > )
    {
        return NONINTERSECT;
    }

    if (p2_tri1_vertex1 <  && p2_tri1_vertex2 <  && p2_tri1_vertex3 < )
    {
        return NONINTERSECT;
    }

    if (p2_tri1_vertex1 ==  && p2_tri1_vertex2 * p2_tri1_vertex3 > )
    {
        if (is_point_within_triangle(tri2, tri1->Vertex_1))
        {
            return INTERSECT;
        }
        else
        {
            return NONINTERSECT;
        }
    }

    if (p2_tri1_vertex2 ==  && p2_tri1_vertex1 * p2_tri1_vertex3 > )
    {
        if (is_point_within_triangle(tri2, tri1->Vertex_2))
        {
            return INTERSECT;
        }
        else
        {
            return NONINTERSECT;
        }
    }

    if (p2_tri1_vertex3 ==  && p2_tri1_vertex1 * p2_tri1_vertex2 > )
    {
        if (is_point_within_triangle(tri2, tri1->Vertex_3))
        {
            return INTERSECT;
        }
        else
        {
            return NONINTERSECT;
        }
    }

    float* tri1_a = tri1->Vertex_1, *tri1_b = tri1->Vertex_2, *tri1_c = tri1->Vertex_3
        , *tri2_a = tri2->Vertex_1, *tri2_b = tri2->Vertex_2, *tri2_c = tri2->Vertex_3;

    float* m;

    float im;

    if (p2_tri1_vertex2 * p2_tri1_vertex3 >=  && p2_tri1_vertex1 != )
    {
        if (p2_tri1_vertex1 < )
        {
            m = tri2_b;
            tri2_b = tri2_c;
            tri2_c = m;

            im = p1_tri2_vertex2;
            p1_tri2_vertex2 = p1_tri2_vertex3;
            p1_tri2_vertex3 = im;
        }
    }
    else if (p2_tri1_vertex1 * p2_tri1_vertex3 >=  && p2_tri1_vertex2 != )
    {
        m = tri1_a;
        tri1_a = tri1_b;
        tri1_b = tri1_c;
        tri1_c = m;

        if (p2_tri1_vertex2 < )
        {
            m = tri2_b;
            tri2_b = tri2_c;
            tri2_c = m;

            im = p1_tri2_vertex2;
            p1_tri2_vertex2 = p1_tri2_vertex3;
            p1_tri2_vertex3 = im;
        }
    }
    else if (p2_tri1_vertex1 * p2_tri1_vertex2 >=  && p2_tri1_vertex3 != )
    {
        m = tri1_a;

        tri1_a = tri1_c;

        tri1_c = tri1_b;

        tri1_b = m;

        if (p2_tri1_vertex3 < )
        {
            m = tri2_b;
            tri2_b = tri2_c;
            tri2_c = m;

            im = p1_tri2_vertex2;
            p1_tri2_vertex2 = p1_tri2_vertex3;
            p1_tri2_vertex3 = im;
        }
    }

    if (p1_tri2_vertex2 * p1_tri2_vertex3 >=  && p1_tri2_vertex1 != )
    {
        if (p1_tri2_vertex1 < )
        {
            m = tri1_b;
            tri1_b = tri1_c;
            tri1_c = m;
        }
    }
    else if (p1_tri2_vertex1 * p1_tri2_vertex3 >=  && p1_tri2_vertex2 != )
    {
        m = tri2_a;

        tri2_a = tri2_b;

        tri2_b = tri2_c;

        tri2_c = m;

        if (p1_tri2_vertex2 < )
        {
            m = tri1_b;
            tri1_b = tri1_c;
            tri1_c = m;
        }
    }
    else if (p1_tri2_vertex1 * p1_tri2_vertex2 >=  && p1_tri2_vertex3 != )
    {
        m = tri2_a;

        tri2_a = tri2_c;

        tri2_c = tri2_b;

        tri2_b = m;

        if (p1_tri2_vertex3 < )
        {
            m = tri1_b;
            tri1_b = tri1_c;
            tri1_c = m;
        }
    }

    if (get_vector4_det(tri1_a, tri1_b, tri2_a, tri2_b) <=  && get_vector4_det(tri1_a, tri1_c, tri2_c, tri2_a) <= )
    {
        return INTERSECT;
    }
    else
    {
        return NONINTERSECT;
    }
}