Eclipse:初始化监视器线程失败:无法建立环回连接

I have Eclipse Indigo installed on Win7 64bit with the ADT plugin and Android SDK's installed.

我在win764bit上安装了Eclipse Indigo插件和Android SDK。

An error occurs when I have my emulator open and I try to launch my test application:

当我打开模拟器并尝试启动测试应用程序时，会出现错误:

Failed to initialize Monitor Thread: Unable to establish loopback connection

I have looked into this error and it most often appears to be a firewall issue but with the firewall turned off I still get the error. Would it have anything to do with me having another Eclipse based IDE installed (Aptana 3)?

我研究过这个错误，它通常看起来是防火墙的问题，但是随着防火墙被关闭，我仍然得到这个错误。它与我安装另一个基于Eclipse的IDE (Aptana 3)有什么关系吗?

Things I have tried so far:

到目前为止我尝试过的事情:

Turn firewall off
关闭防火墙
changed ddms port to 8601
将ddms端口更改为8601
checked localhost is set to 127.0.01
检查localhost设置为127.0.01。

I'm running out of ideas so any help of suggestions would be appreciated.

我的想法都快用完了，所以如果你能给我一些建议，我将不胜感激。

7 个解决方案

#1

No need to disable IPV6. Just force Eclipse to use IPV4. Edit eclipse.ini and add the last line:

不需要禁用IPV6。只需强制Eclipse使用IPV4。eclipse编辑。最后一行:

openFile
-vmargs
-Djava.net.preferIPv4Stack=true

#2

Solution : turn off Teredo Tunneling Pseudo-Interface.

解决方案:关闭Teredo隧道伪接口。

This probably converts IP4 to IPv6 addresses or something, resulting in an IPv6 address for your localhost (strange though, that a PING still results in IP4). Anyway, turning it off (Device manager > View > Show hidden devices > right click on Teredo > disable) solves the problem!

这可能会将IP4转换为IPv6地址或其他地址，从而为本地主机生成IPv6地址(奇怪的是，一个PING仍然会导致IP4)。不管怎样，关闭它(设备管理器>视图>显示隐藏设备>右键点击Teredo >禁用)解决了这个问题!

I found out by doing a ipconfig /all in the NON working situation. It showed :

我通过做一个ipconfig /all在不工作的情况下发现了这一点。它显示:

Tunnel adapter Teredo Tunneling Pseudo-Interface:

隧道适配器Teredo隧道伪接口:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface

Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:####:###:####:####(Preferred)

Link-local IPv6 Address . . . . . : fe80::3c47:###:####:#### (Preferred)

//edit : I guess it's technically a workaround untill Eclipse supports IPv6

//编辑:在Eclipse支持IPv6之前，我认为这在技术上是一个解决方案

#3

Ahah!! Finally fixed this one. It was a problem I believe with my bigfoot killer network

啊! !最后固定。我相信这是我的大脚杀手网络的问题

So, here is what I did.

这就是我所做的。

Open CMD as administrator ( Right click, open as administrator ) Type: "netsh winsock reset"

以管理员身份打开CMD(右击，以管理员身份打开)类型:“netsh winsock reset”

Restart the computer

重新启动计算机

When it comes up saying: "Your LSP is not mapped correctly, would you like to re map it?" Click "NO"

当它出现说:“您的LSP没有正确地映射时，您想要重新映射它吗?”点击“否”

Then all is well..

然后一切都好. .

Only now, I do have it asking me about LSP mapping each time I boot, this f

直到现在，我才让它问我关于LSP映射的问题每次我启动，这个f

#4

Was the same problem, tried everything and only completely deleted Java 7 and installed Java 6 JDK solved problem!

是同样的问题，尝试了一切，只完全删除了Java 7，安装了Java 6 JDK解决了问题!

#5

I had the same problem with my Killer Networks Wireless card N-1103. I found that installing the latest driver from their website cured it

我的杀手网络无线卡N-1103也有同样的问题。我发现，在他们的网站上安装最新的驱动程序后，问题就解决了

#6

It seems that Eclipse is blocked...

似乎Eclipse被阻塞了……

Go to command prompt and to /tools directory and type:

转到命令提示符和/tools目录并输入:

adb kill-server 
adb start-server

Hope this helps...

希望这有助于……

#7

Had the same problem here. My problem was a firewall issue. I use VirtualBox sometimes and found that the virtual machine's network adapter was the roadblock. Disabling the virtual adapter in Windows device manager solved my issue.

这里也有同样的问题。我的问题是防火墙的问题。我有时使用VirtualBox，发现虚拟机的网络适配器是障碍。在Windows设备管理器中禁用虚拟适配器解决了我的问题。

#1