I'm kinda new in asking @*, however it's been the closest thing I have as a Bible (other than Ritchie's C book) specially in these days of final projects for most of my subjects. Anyway, my question is about the libraries needed for an application that communicates with a HID Device and the possibility to do it with C++.
我对@*的提问有点陌生，但是这是我作为圣经(除了Ritchie的C书)的最接近的东西，特别是在我的大部分主题的最终项目中。无论如何，我的问题是关于一个应用程序所需要的库，它与一个隐藏设备进行通信，并且有可能使用c++实现它。
I don't need help with the Firmware, my device is already working the way I expect it to. However my only experience programming HID devices is with C (Windows - VS2010) and right now I am in a final project for Compilers class in wich we send information to a device with a matrix screen to display "stuff". My partner however needs to do something in C++ which can save us a lot of time (something nice considering its due in two days).
我不需要固件的帮助，我的设备已经按照我期望的方式工作了。然而，我唯一的编程经验是使用C (Windows - VS2010)，现在我在维奇的编译器类的最后一个项目中，我们将信息发送到带有矩阵屏幕的设备以显示“东西”。但是我的合作伙伴需要用c++做一些事情，这样可以节省很多时间(考虑到两天内就要交)。
The whole point of this being to ask if it can be done the same way that I already have in C (with its obvious adjustments) and some parts of the code in C++ and still get to be compatible with SetupApi.DLL and HID.DLL
问题的关键在于，它是否可以按照我在C中已经使用过的方式(有明显的调整)和c++中的一些代码，并且仍然能够与SetupApi兼容。DLL和HID.DLL
Any kind of advice, pointers or instructions is deeply appreciated. I include the code I have used so far.
任何建议、指示或指示，我们都非常感激。我包括了到目前为止使用的代码。
Excuse all the comments in spanish and mess I might have
请原谅我的西班牙语评论和混乱
#include <stdio.h>
#include <conio.h>
#include <stdlib.h>
#include <windows.h>
#include <SETUPAPI.H>
//----------------------------------------------
#define RICH_VENDOR_ID 0x0000
#define RICH_USBHID_GENIO_ID 0x2012
#define INPUT_REPORT_SIZE 5
#define OUTPUT_REPORT_SIZE 2
//----------------------------------------------
char c=0x0;
DWORD BytesRead = 0;
DWORD BytesWritten = 0;
unsigned char reporteEntrada[INPUT_REPORT_SIZE+1];
unsigned char reporteSalida[OUTPUT_REPORT_SIZE+1];
int status = 0;
static unsigned char dato = 0x01;
static unsigned char numLED = 1;
unsigned char palabra[192]={0};
int desplegar,valorled;
desplegar=0;
valorled=0;
unsigned char temporal;
//unsigned char ch;
//unsigned int index;
typedef struct _HIDD_ATTRIBUTES {
ULONG Size; // = sizeof (struct _HIDD_ATTRIBUTES)
USHORT VendorID;
USHORT ProductID;
USHORT VersionNumber;
} HIDD_ATTRIBUTES, *PHIDD_ATTRIBUTES;
typedef VOID (__stdcall *PHidD_GetProductString)(HANDLE, PVOID, ULONG);
typedef VOID (__stdcall *PHidD_GetHidGuid)(LPGUID);
typedef BOOLEAN (__stdcall *PHidD_GetAttributes)(HANDLE, PHIDD_ATTRIBUTES);
typedef BOOLEAN (__stdcall *PHidD_SetFeature)(HANDLE, PVOID, ULONG);
typedef BOOLEAN (__stdcall *PHidD_GetFeature)(HANDLE, PVOID, ULONG);
//----------------------------------------------
HINSTANCE hHID = NULL;
PHidD_GetProductString HidD_GetProductString = NULL;
PHidD_GetHidGuid HidD_GetHidGuid = NULL;
PHidD_GetAttributes HidD_GetAttributes = NULL;
PHidD_SetFeature HidD_SetFeature = NULL;
PHidD_GetFeature HidD_GetFeature = NULL;
HANDLE DeviceHandle = INVALID_HANDLE_VALUE;
unsigned int moreHIDDevices=TRUE;
unsigned int HIDDeviceFound=FALSE;
unsigned int terminaAbruptaEInstantaneamenteElPrograma=0;
void Load_HID_Library (void) {
hHID = LoadLibrary("HID.DLL");
if (!hHID) {
printf("Failed to load HID.DLL\n");
return;
}
HidD_GetProductString = (PHidD_GetProductString) GetProcAddress(hHID, "HidD_GetProductString");
HidD_GetHidGuid = (PHidD_GetHidGuid) GetProcAddress(hHID, "HidD_GetHidGuid");
HidD_GetAttributes = (PHidD_GetAttributes) GetProcAddress(hHID, "HidD_GetAttributes");
HidD_SetFeature = (PHidD_SetFeature) GetProcAddress(hHID, "HidD_SetFeature");
HidD_GetFeature = (PHidD_GetFeature) GetProcAddress(hHID, "HidD_GetFeature");
if ( !HidD_GetProductString
|| !HidD_GetAttributes
|| !HidD_GetHidGuid
|| !HidD_SetFeature
|| !HidD_GetFeature ) {
printf("Couldn't find one or more HID entry points\n");
return;
}
}
int Open_Device(void) {
HDEVINFO DeviceInfoSet;
GUID InterfaceClassGuid;
SP_DEVICE_INTERFACE_DATA DeviceInterfaceData;
PSP_DEVICE_INTERFACE_DETAIL_DATA pDeviceInterfaceDetailData;
HIDD_ATTRIBUTES Attributes;
DWORD Result;
DWORD MemberIndex = 0;
DWORD Required;
//Validar si se "cargó" la biblioteca (DLL)
if (!hHID)
return (0);
//Obtener el Globally Unique Identifier (GUID) para dispositivos HID
HidD_GetHidGuid (&InterfaceClassGuid);
//Sacarle a Windows la información sobre todos los dispositivos HID instalados y activos en el sistema
// ... almacenar esta información en una estructura de datos de tipo HDEVINFO
DeviceInfoSet = SetupDiGetClassDevs(&InterfaceClassGuid, NULL, NULL, DIGCF_PRESENT|DIGCF_INTERFACEDEVICE);
if (DeviceInfoSet == INVALID_HANDLE_VALUE)
return (0);
//Obtener la interfaz de comunicación con cada uno de los dispositivos para preguntarles información específica
DeviceInterfaceData.cbSize = sizeof(SP_DEVICE_INTERFACE_DATA);
while (!HIDDeviceFound) {
// ... utilizando la variable MemberIndex ir preguntando dispositivo por dispositivo ...
moreHIDDevices = SetupDiEnumDeviceInterfaces (DeviceInfoSet, NULL, &InterfaceClassGuid,
MemberIndex,&DeviceInterfaceData);
if (!moreHIDDevices) {
// ... si llegamos al fin de la lista y no encontramos al dispositivo ==> terminar y marcar error
SetupDiDestroyDeviceInfoList(DeviceInfoSet);
return (0); //No more devices found
} else {
//Necesitamos preguntar, a través de la interfaz, el PATH del dispositivo, para eso ...
// ... primero vamos a ver cuántos caracteres se requieren (Required)
Result = SetupDiGetDeviceInterfaceDetail(DeviceInfoSet,&DeviceInterfaceData,NULL,0,&Required,NULL);
pDeviceInterfaceDetailData = (PSP_DEVICE_INTERFACE_DETAIL_DATA)malloc(Required);
if (pDeviceInterfaceDetailData == NULL) {
printf("Error en SetupDiGetDeviceInterfaceDetail\n");
return (0);
}
//Ahora si, ya que el "buffer" fue preparado (pDeviceInterfaceDetailData{DevicePath}), vamos a preguntar PATH
pDeviceInterfaceDetailData->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA);
Result = SetupDiGetDeviceInterfaceDetail (DeviceInfoSet,&DeviceInterfaceData,pDeviceInterfaceDetailData,
Required,NULL,NULL);
if (!Result) {
printf("Error en SetupDiGetDeviceInterfaceDetail\n");
free(pDeviceInterfaceDetailData);
return(0);
}
//Para este momento ya sabemos el PATH del dispositivo, ahora hay que preguntarle ...
// ... su VID y PID, para ver si es con quien nos interesa comunicarnos
printf("Found? ==> ");
printf("Device: %s\n",pDeviceInterfaceDetailData->DevicePath);
//Obtener un "handle" al dispositivo
DeviceHandle = CreateFile (pDeviceInterfaceDetailData->DevicePath,
GENERIC_READ|GENERIC_WRITE,
FILE_SHARE_READ|FILE_SHARE_WRITE,
(LPSECURITY_ATTRIBUTES)NULL,
OPEN_EXISTING,
0,
NULL);
if (DeviceHandle == INVALID_HANDLE_VALUE) {
printf("¡¡¡Error en el CreateFile!!!\n");
} else {
//Preguntar por los atributos del dispositivo
Attributes.Size = sizeof(Attributes);
Result = HidD_GetAttributes (DeviceHandle,&Attributes);
if (!Result) {
printf("Error en HIdD_GetAttributes\n");
CloseHandle(DeviceHandle);
free(pDeviceInterfaceDetailData);
return(0);
}
//Analizar los atributos del dispositivo para verificar el VID y PID
printf("MemberIndex=%d,VID=%04x,PID=%04x\n",MemberIndex,Attributes.VendorID,Attributes.ProductID);
if ((Attributes.VendorID == RICH_VENDOR_ID) && (Attributes.ProductID == RICH_USBHID_GENIO_ID)) {
printf("USB/HID GenIO ==> ");
printf("Device: %s\n",pDeviceInterfaceDetailData->DevicePath);
HIDDeviceFound=TRUE;
} else
CloseHandle(DeviceHandle);
}
MemberIndex++;
free(pDeviceInterfaceDetailData);
if (HIDDeviceFound) {
printf("Dispositivo HID solicitado ... ¡¡¡localizado!!!, presione <ENTER>\n");
getchar();
}
}
}
return(1);
}
void Close_Device (void) {
if (DeviceHandle != NULL) {
CloseHandle(DeviceHandle);
DeviceHandle = NULL;
}
}
int chToIndex(unsigned char ch){
if((ch>='0')&&(ch<='9')){
return ch-48;
}else if((ch>='A')&&(ch<='Z')){
return ch-55;
}else if((ch>='a')&&(ch<='z')){
return ch-61;
}else{
switch (ch){
case '*': return 62;
// break;
case '+': return 63;
// break;
case '-': return 64;
//break;
case '/': return 65;
//break;
case '=': return 66;
// break;
case '>': return 67;
// break;
case '<': return 68;
// break;
case '!': return 69;
// break;
case '.': return 70;
// break;
case '&': return 71;
// break;
case '^': return 72;
// break;
case '(': return 73;
// break;
case ')': return 74;
// break;
case '[': return 75;
// break;
case ']': return 76;
// break;
case ',': return 77;
// break;
case ';': return 78;
// break;
case ':': return 79;
// break;
case 0x20: return 80;
default: return 81;
// break;
}
}
}
int Touch_Device (void) {
int z;
int index;
int col,lin;
unsigned char ch;
if (DeviceHandle == NULL) //Validar que haya comunicacion con el dispositivo
return 0;
if(c != '27' )
{
printf("Selecciona accion:\n1) Limpiar Pantalla\n2) Imprimir todos caracteres\n3) Escribir caracter\n4) Escribir string\n5) Salir\n");
desplegar=getch();
desplegar=getch();
if((desplegar=='5')||(desplegar==(char)'27')){
terminaAbruptaEInstantaneamenteElPrograma=1;
}
else if(desplegar=='4'){
lin=0;
col=0;
index=0;
printf("Escribe texto (termina con Enter):\n");
scanf("%s",palabra);
while(palabra[index]!='\0'){
z++;
}
printf("Longitud de palabra: %d",z);
while((palabra[index]!='\0')){
if((palabra[index]==NULL)&&(palabra[index+1]!=NULL))
palabra[index]=0x20;
reporteSalida[0]=0x00;
reporteSalida[1]=0x04;
reporteSalida[2]=(char)chToIndex(palabra[index]);
reporteSalida[3]=(char)lin;
reporteSalida[4]=(char)col;
status = WriteFile(DeviceHandle,reporteSalida,INPUT_REPORT_SIZE+1,&BytesWritten,NULL);
if (!status)
printf("Error en el WriteFile %d %d\n",GetLastError(),BytesWritten);
else
printf("Se enviaron %d bytes al dispositivo (posX=%d, posY=%d, dato=%d)\n",BytesWritten,reporteSalida[4],reporteSalida[3],reporteSalida[2]);
if(col>=23){
lin++;
col=0;
}
if(lin>=7){
lin=0;
}
col++;
index++;
}
}
else if (desplegar=='3'){
reporteSalida[0]=0x00;
reporteSalida[1]=0x04;
printf("Que caracter deseas desplegar: ");
ch=getch();
printf("\n");
z=chToIndex(ch);
reporteSalida[2]=(char)z;
do{
printf("En que renglon en y (0-7): ");
scanf("%d",&desplegar);
printf("\n");
}while((desplegar<0)&&(desplegar>7));
reporteSalida[3]=(char)desplegar;
do{
printf("En que columna en x (0-23): ");
scanf("%d",&desplegar);
printf("\n");
}while((desplegar<0)&&(desplegar>23));
reporteSalida[4]=(char)desplegar;
printf("ReporteSalida: %02X %02X %02X %02X %02X \n",(unsigned char)reporteSalida[0],
(unsigned char)reporteSalida[1],
(unsigned char)reporteSalida[2],
(unsigned char)reporteSalida[3],
(unsigned char)reporteSalida[4]);
status = WriteFile(DeviceHandle,reporteSalida,INPUT_REPORT_SIZE+1,&BytesWritten,NULL);
if (!status)
printf("Error en el WriteFile %d %d\n",GetLastError(),BytesWritten);
else
printf("Se enviaron %d bytes al dispositivo (posX=%d, posY=%d, dato=%d)\n",BytesWritten,reporteSalida[4],reporteSalida[3],reporteSalida[2]);
}
else if (desplegar=='2'){
lin=0;
col=0;
for (index=0;index<=80;index++){
reporteSalida[0]=0x00;
reporteSalida[1]=0x04;
reporteSalida[2]=(char)index;
reporteSalida[3]=(char)lin;
reporteSalida[4]=(char)col;
status = WriteFile(DeviceHandle,reporteSalida,INPUT_REPORT_SIZE+1,&BytesWritten,NULL);
if (!status)
printf("Error en el WriteFile %d %d\n",GetLastError(),BytesWritten);
else
printf("Se enviaron %d bytes al dispositivo (posX=%d, posY=%d, dato=%d)\n",BytesWritten,reporteSalida[4],reporteSalida[3],reporteSalida[2]);
if(col>=23){
lin++;
col=0;
}
if(lin>=7){
lin=0;
}
col++;
}
}
else if(desplegar=='1'){
printf("Limpiando pantalla ...\n");
reporteSalida[0]=0x00;
reporteSalida[1]=0x03;
reporteSalida[2]=0;
status = WriteFile(DeviceHandle,reporteSalida,INPUT_REPORT_SIZE+1,&BytesWritten,NULL);
if (!status)
printf("Error en el WriteFile %d %d\n",GetLastError(),BytesWritten);
else
printf("Escritos %d\n",BytesWritten);
}
else{
Touch_Device();
}
}
return status;
}
void main () {
Load_HID_Library();
if (Open_Device()) {
printf("Vamos bien\n");
while ((c=getch()!=27)
&&(!terminaAbruptaEInstantaneamenteElPrograma)) {
Touch_Device();
Sleep(500);
}
} else {
printf(">:(\n");
}
Close_Device();
}
2 个解决方案
#1
0
By and large, you can compile any C code as C++. Have you tried to compile it as C++ and did you get any errors?
总的来说，您可以将任何C代码编译为c++。你试过把它编译成c++吗?有什么错误吗?
The answer to your question is that, yes, you can use SETUPAPI.DLL and HID.DLL from C++ exactly as you would with C.
你的问题的答案是，是的，你可以用SETUPAPI。DLL,藏。从c++的DLL，就像你对C一样。
#2
0
Change your C source file into C++. If you are using VS, it could be as easy as change the file extension (.c -> .cpp) and fix some warning issues.
将您的C源文件更改为c++。如果您正在使用VS，那么只需更改文件扩展名(。并修正一些警告问题。
C++ programs can use setupapi.dll (C library) because APIs are declared like below.
c++程序可以使用setupapi。dll (C库)，因为api被声明如下。
(In the header file)
(头文件)
#ifdef __cplusplus
extern "C" {
#endif
int declaration_of_c_function(...);
#ifdef __cplusplus
}
#endif
extern "C" is the new syntax introduced in C++ to enable C/C++ integration.
外部“C”是在c++中引入的新语法，用于支持C/ c++的集成。
That is, it not simple if you don't know C++.
也就是说，如果你不知道c++的话，这并不简单。
#1
0
By and large, you can compile any C code as C++. Have you tried to compile it as C++ and did you get any errors?
总的来说，您可以将任何C代码编译为c++。你试过把它编译成c++吗?有什么错误吗?
The answer to your question is that, yes, you can use SETUPAPI.DLL and HID.DLL from C++ exactly as you would with C.
你的问题的答案是，是的，你可以用SETUPAPI。DLL,藏。从c++的DLL，就像你对C一样。
#2
0
Change your C source file into C++. If you are using VS, it could be as easy as change the file extension (.c -> .cpp) and fix some warning issues.
将您的C源文件更改为c++。如果您正在使用VS，那么只需更改文件扩展名(。并修正一些警告问题。
C++ programs can use setupapi.dll (C library) because APIs are declared like below.
c++程序可以使用setupapi。dll (C库)，因为api被声明如下。
(In the header file)
(头文件)
#ifdef __cplusplus
extern "C" {
#endif
int declaration_of_c_function(...);
#ifdef __cplusplus
}
#endif
extern "C" is the new syntax introduced in C++ to enable C/C++ integration.
外部“C”是在c++中引入的新语法，用于支持C/ c++的集成。
That is, it not simple if you don't know C++.
也就是说，如果你不知道c++的话，这并不简单。