1 查看nand分区
root@ubuntu:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00020000 "U-Boot-min"
mtd1: 00240000 00020000 "U-Boot"
mtd2: 00020000 00020000 "U-Boot Env"
mtd3: 00440000 00020000 "Kernel"
mtd4: 1f400000 00020000 "File System"
mtd5: 00540000 00020000 "Reserved"
root@ubuntu:~# cat /proc/partitions
major minor #blocks name
31 0 128 mtdblock0
31 1 2304 mtdblock1
31 2 128 mtdblock2
31 3 4352 mtdblock3
31 4 512000 mtdblock4
31 5 5376 mtdblock5
root@ubuntu:~#
2、查看mtd4的信息
root@ubuntu:~# mtdinfo -m 4 -u
mtd4
Name: File System
Type: nand
Eraseblock size: 131072 bytes, 128.0 KiB
Amount of eraseblocks: 4000 (524288000 bytes, 500.0 MiB)
Minimum input/output unit size: 2048 bytes
Sub-page size: 512 bytes
OOB size: 64 bytes
Character device major/minor: 90:8
Bad blocks are allowed: true
Device is writable: true
Default UBI VID header offset: 512
Default UBI data offset: 2048
Default UBI LEB size: 129024 bytes, 126.0 KiB
Maximum UBI volumes count: 128
root@ubuntu:~# mtdinfo -m 2 -u
或
root@ubuntu:~# mtdinfo /dev/mtd4
mtd2
Name: U-Boot Env
Type: nand
Eraseblock size: 131072 bytes, 128.0 KiB // FLASH物理擦除块大小
Amount of eraseblocks: 1 (131072 bytes, 128.0 KiB)
Minimum input/output unit size: 2048 bytes 1）nor flash:通常是1个字节 2）nand falsh：一个页面
Sub-page size: 512 bytes //对于nand flash来说，子页大小
OOB size: 64 bytes
Character device major/minor: 90:4
Bad blocks are allowed: true
Device is writable: true
Default UBI VID header offset: 512
Default UBI data offset: 2048
Default UBI LEB size: 129024 bytes, 126.0 KiB //逻辑擦除块大小
Maximum UBI volumes count: 128
mtd4大小为500MiB,擦除单元大小(一般即为块大小)为128KiB，名字是"NAND simulator partition 0"。 NandFlash
擦除是以块(block)为单位，读写是以页(page)为单位。
3 root@ubuntu:~# ls -lah /dev/mtd*
crw------- 1 root root 90, 0 Jan 1 00:00 /dev/mtd0 //字符设备
crw------- 1 root root 90, 1 Jan 1 00:00 /dev/mtd0ro
crw------- 1 root root 90, 2 Jan 1 00:00 /dev/mtd1
crw------- 1 root root 90, 3 Jan 1 00:00 /dev/mtd1ro
crw------- 1 root root 90, 4 Jan 1 00:00 /dev/mtd2
crw------- 1 root root 90, 5 Jan 1 00:00 /dev/mtd2ro
crw------- 1 root root 90, 6 Jan 1 00:00 /dev/mtd3
crw------- 1 root root 90, 7 Jan 1 00:00 /dev/mtd3ro
crw------- 1 root root 90, 8 Jan 1 00:00 /dev/mtd4
crw------- 1 root root 90, 9 Jan 1 00:00 /dev/mtd4ro
crw------- 1 root root 90, 10 Jan 1 00:00 /dev/mtd5
crw------- 1 root root 90, 11 Jan 1 00:00 /dev/mtd5ro
brw-rw---- 1 root disk 31, 0 Jan 1 00:00 /dev/mtdblock0 //块设备，与mtd0对应
brw-rw---- 1 root disk 31, 1 Jan 1 00:00 /dev/mtdblock1
brw-rw---- 1 root disk 31, 2 Jan 1 00:00 /dev/mtdblock2
brw-rw---- 1 root disk 31, 3 Jan 1 00:00 /dev/mtdblock3
brw-rw---- 1 root disk 31, 4 Jan 1 00:00 /dev/mtdblock4
brw-rw---- 1 root disk 31, 5 Jan 1 00:00 /dev/mtdblock5
root@ubuntu:~#
4.
关于mtd工具集的安装
sudo apt-get install mtd-utils
UBI文件系统镜像文件的制作
@ubuntu:~$ sudo mkfs.ubifs -r targetfs -m 2048 -e 129024 -c 3900 -o ubifs.img
@ubuntu:~$ sudo ubinize -o ubi.img -m 2048 -p 128KiB -s 512 ubinize.cfg
关于mkfs.ubifs参数的算法
-m minimum I/O unit size
-e, --leb-size=SIZE logical erase block size
-c maximum logical erase block count
-x compression type - "lzo", "favor_lzo", "zlib" or "none" (default: "lzo")
-p size of the physical eraseblock of the flash this UBI image is created for in bytes
wear_level_reserved_blocks is 1% of total blcoks per device
*logical_erase_block_size* is physical erase block size minus 2 pages for UBI
Block size = page_size * pages_per_block
physical blocks on a partition = partition size / block size
Logical blocks on a partition = physical blocks on a partitiion - reserved for wear level
File-system volume = Logical blocks in a partition * Logical erase block size
关于参数可以参考attach的命令输出：
root@ubuntu:~# ubiattach /dev/ubi_ctrl -m 4 -d 0
UBI device number 0, total 4000 LEBs (516096000 bytes, 492.2 MiB), available 0 LEBs (0 bytes), LEB
size 129024 bytes (126.0 KiB)
root@ubuntu:~#
ubinize.cfg文件
[ubifs]
mode=ubi
image=ubifs.img
vol_id=0
vol_size=450MiB
vol_type=dynamic
vol_alignment=1
vol_name=rootfs
vol_flags=autoresize
5. UBI文件系统镜像在Linux下的烧写
flash_eraseall /dev/mtd4
ubiformat /dev/mtd4 -s 512 -f /xxx/ubi.img
6、 UBI文件系统镜像在U-BOOT下的烧写
//load ubi image to RAM
tftp ubi.img
//erase MTD4 nand space
nand erase 0x6c0000 0xc820000
//write image to nand
nand write.i 0x81000000 0x6c0000 0xxxxx(image size)
7. UBI文件系统镜像在Linux下的挂载和卸载
挂载
ubiattach /dev/ubi_ctrl -m 4 -d 0
mount -t ubifs ubi0_0 /mnt/ubi
卸载
umount /mnt/ubi
ubidetach -d 0
8、使用ubi做根文件系统
需要在bootargs中设置如下信息：
root=ubi0:rootfs ubi.mtd=4 rootfstype=ubifs
配置linux内核
配置的时候选上
1)Device Drivers --->Memory Technology Device (MTD) support --->UBI - Unsorted block images --->Enable UBI
2)File systems --->Miscellaneous filesystems --->UBIFS file system support
这样我们的内核就支持UBIFS文件系统了