RabbitMQ 配置
一、RabbitMQ 配置修改方式
1、修改环境变量
2、修改配置文件（只介绍这个）
3、修改运行时参数和政策
locate rabbitmq
vi /var/log/rabbitmq/rabbit@10-10-43-207.log-20160918
说明我尚未添加配置文件，采用的默认配置启动的 RabbitMQ
还有一个地方可以看到有无添加配置文件（rabbitmq_management，见下图）
二、配置项
| Key | Documentation |
|---|---|
| tcp_listeners | List of ports on which to listen for AMQP connections (without SSL). Can contain integers (meaning "listen on all interfaces") or tuples such as {"127.0.0.1", 5672} to listen on one or more interfaces.
Default: [5672] |
| num_tcp_acceptors | Number of Erlang processes that will accept connections for the TCP listeners.
Default: 10 |
| handshake_timeout | Maximum time for AMQP 0-8/0-9/0-9-1 handshake (after socket connection and SSL handshake), in milliseconds.
Default: 10000 |
| ssl_listeners | As above, for SSL connections.
Default: [] |
| num_ssl_acceptors | Number of Erlang processes that will accept connections for the SSL listeners.
Default: 1 |
| ssl_options | SSL configuration. See the SSL documentation.
Default: [] |
| ssl_handshake_timeout | SSL handshake timeout, in milliseconds.
Default: 5000 |
| vm_memory_high_watermark | Memory threshold at which the flow control is triggered. See the memory-based flow control documentation.
Default: 0.4 |
| vm_memory_high_watermark_paging_ratio | Fraction of the high watermark limit at which queues start to page messages out to disc to free up memory. See thememory-based flow control documentation.
Default: 0.5 |
| disk_free_limit | Disk free space limit of the partition on which RabbitMQ is storing data. When available disk space falls below this limit, flow control is triggered. The value may be set relative to the total amount of RAM (e.g.{mem_relative, 1.0}). The value may also be set to an integer number of bytes. Or, alternatively, in information units (e.g "50MB"). By default free disk space must exceed 50MB. See the Disk Alarms documentation.
Default: 50000000 |
| log_levels | Controls the granularity of logging. The value is a list of log event category and log level pairs.
The level can be one of 'none' (no events are logged), 'error' (only errors are logged), 'warning' (only errors and warning are logged), 'info' (errors, warnings and informational messages are logged), or 'debug' (errors, warnings, informational messages and debugging messages are logged). At present there are four categories defined. Other, currently uncategorised, events are always logged. The categories are:
Default: [{connection, info}] |
| frame_max | Maximum permissible size of a frame (in bytes) to negotiate with clients. Setting to 0 means "unlimited" but will trigger a bug in some QPid clients. Setting a larger value may improve throughput; setting a smaller value may improve latency.
Default: 131072 |
| channel_max | Maximum permissible number of channels to negotiate with clients. Setting to 0 means "unlimited". Using more channels increases memory footprint of the broker.
Default: 0 |
| channel_operation_timeout | Channel operation timeout in milliseconds (used internally, not directly exposed to clients due to messaging protocol differences and limitations).
Default: 15000 |
| heartbeat | Value representing the heartbeat delay, in seconds, that the server sends in the connection.tune frame. If set to 0, heartbeats are disabled. Clients might not follow the server suggestion, see the AMQP reference for more details. Disabling heartbeats might improve performance in situations with a great number of connections, but might lead to connections dropping in the presence of network devices that close inactive connections.
Default: 60 (580 prior to release 3.5.5) |
| default_vhost | Virtual host to create when RabbitMQ creates a new database from scratch. The exchange amq.rabbitmq.logwill exist in this virtual host.
Default: <<"/">> |
| default_user | User name to create when RabbitMQ creates a new database from scratch.
Default: <<"guest">> |
| default_pass | Password for the default user.
Default: <<"guest">> |
| default_user_tags | Tags for the default user.
Default: [administrator] |
| default_permissions |
Permissions to assign to the default user when creating it.
Default: [<<".*">>, <<".*">>, <<".*">>] |
| loopback_users | List of users which are only permitted to connect to the broker via a loopback interface (i.e. localhost).
If you wish to allow the default guest user to connect remotely, you need to change this to []. Default: [<<"guest">>] |
| cluster_nodes | Set this to cause clustering to happen automatically when a node starts for the very first time. The first element of the tuple is the nodes that the node will try to cluster to. The second element is either disc or ram and determines the node type.
Default: {[], disc} |
| server_properties | List of key-value pairs to announce to clients on connection.
Default: [] |
| collect_statistics | Statistics collection mode. Primarily relevant for the management plugin. Options are:
You probably don't want to change this yourself. Default: none |
| collect_statistics_interval | Statistics collection interval in milliseconds. Primarily relevant for the management plugin.
Default: 5000 |
| auth_mechanisms |
SASL authentication mechanisms to offer to clients.
Default: ['PLAIN', 'AMQPLAIN'] |
| auth_backends |
List of authentication / authorisation backends to use. This list can contain names of modules (in which case the same module is used for both authentication and authorisation), or 2-tuples like {ModN, ModZ} in which caseModN is used for authentication and ModZ is used for authorisation. In the 2-tuple case, ModZ can be replaced by a list, all the elements of which must confirm each authorisation query, e.g. {ModN, [ModZ1, ModZ2]}. This allows authorisation plugins to mix-in and provide additional security constraints. Other databases than rabbit_auth_backend_internal are available through plugins. Default: [rabbit_auth_backend_internal] |
| reverse_dns_lookups | Set to true to have RabbitMQ perform a reverse DNS lookup on client connections, and present that information through rabbitmqctl and the management plugin.
Default: false |
| delegate_count | Number of delegate processes to use for intra-cluster communication. On a machine which has a very large number of cores and is also part of a cluster, you may wish to increase this value.
Default: 16 |
| trace_vhosts | Used internally by the tracer. You shouldn't change this.
Default: [] |
| tcp_listen_options | Default socket options. You probably don't want to change this.
Default: [{backlog, 128},
|
| hipe_compile | Set to true to precompile parts of RabbitMQ with HiPE, a just-in-time compiler for Erlang. This will increase server throughput at the cost of increased startup time.
You might see 20-50% better performance at the cost of a few minutes delay at startup. These figures are highly workload- and hardware-dependent. HiPE support may not be compiled into your Erlang installation. If it is not, enabling this option will just cause a warning message to be displayed and startup will proceed as normal. For example, Debian / Ubuntu users will need to install the erlang-base-hipe package. HiPE is not available at all on some platforms, notably including Windows. HiPE has known issues in Erlang/OTP versions prior to 17.5. Using a recent Erlang/OTP version is highly recommended for HiPE. Default: false |
| cluster_partition_handling | How to handle network partitions. Available modes are:
See the documentation on partitions for more information. Default: ignore |
| cluster_keepalive_interval | How frequently nodes should send keepalive messages to other nodes (in milliseconds). Note that this is not the same thing as net_ticktime; missed keepalive messages will not cause nodes to be considered down.
Default: 10000 |
| queue_index_embed_msgs_below | Size in bytes of message below which messages will be embedded directly in the queue index. You are advised to read the persister tuning documentation before changing this.
Default: 4096 |
| msg_store_index_module | Implementation module for queue indexing. You are advised to read the persister tuning documentation before changing this.
Default: rabbit_msg_store_ets_index |
| backing_queue_module | Implementation module for queue contents. You probably don't want to change this.
Default: rabbit_variable_queue |
| msg_store_file_size_limit | Tunable value for the persister. You almost certainly should not change this.
Default: 16777216 |
| mnesia_table_loading_timeout | Timeout used when waiting for Mnesia tables in a cluster to become available.
Default: 30000 |
| queue_index_max_ journal_entries | Tunable value for the persister. You almost certainly should not change this.
Default: 65536 |
| queue_master_locator | Queue master location strategy. Available strategies are:
See the documentation on queue master location for more information. Default: <<"client-local">> |