Spark Streaming源码解读之流数据不断接收和全生命周期彻底研究和思考

本节的主要内容：

一、数据接受架构和设计模式

二、接受数据的源码解读

Spark Streaming不断持续的接收数据，具有Receiver的Spark 应用程序的考虑。

Receiver和Driver在不同进程，Receiver接收数据后要不断给Deriver汇报。

因为Driver负责调度，Receiver接收的数据如果不汇报给Deriver，Deriver调度时不会把接收的数据计算入调度系统中（如：数据ID，Block分片）。

思考Spark Streaming接收数据：

不断有循环器接收数据，接收数据要存储数据，将存储数据后需要汇报给Deriver，接收数据和存储数据不应该给同一个对象进行处理。

Spark Streaming接收数据从设计模式来讲是MVC的架构：

V：就是Driver

M：就是Receiver

C：就是ReceiverSupervisor

因为：

Receiver就是接收数据器，例如：可以从socketTextStream中获取数据。

ReceiverSupervisor就是存储数据的控制器，因为Receiver是通过ReceiverSupervisor来启动的，反过来讲Receiver在接收到数据后是通过ReceiverSupervisor来存储数据的。

然后将存储后的元数据汇报给Driver端。

V：就是Driver，操作元数据通过元数据指针，根据指针地址操作其他机器上具体数据内容，并将处理结果展示出来。

所以说：

Spark Streaming数据接收全生命周期可以看成是一个MVC模式，ReceiverSupervisor相当于是控制器（C），Receiver(M)、Driver（V）

源码分析：

1、Receiver类：

/**
 * :: DeveloperApi ::
 * Abstract class of a receiver that can be run on worker nodes to receive external data. A
 * custom receiver can be defined by defining the functions `onStart()` and `onStop()`. `onStart()`
 * should define the setup steps necessary to start receiving data,
 * and `onStop()` should define the cleanup steps necessary to stop receiving data.
 * Exceptions while receiving can be handled either by restarting the receiver with `restart(...)`
 * or stopped completely by `stop(...)` or
 *
 * A custom receiver in Scala would look like this.
 *
 * {{{
 *  class MyReceiver(storageLevel: StorageLevel) extends NetworkReceiver[String](storageLevel) {
 *      def onStart() {
 *          // Setup stuff (start threads, open sockets, etc.) to start receiving data.
 *          // Must start new thread to receive data, as onStart() must be non-blocking.
 *
 *          // Call store(...) in those threads to store received data into Spark's memory.
 *
 *          // Call stop(...), restart(...) or reportError(...) on any thread based on how
 *          // different errors needs to be handled.
 *
 *          // See corresponding method documentation for more details
 *      }
 *
 *      def onStop() {
 *          // Cleanup stuff (stop threads, close sockets, etc.) to stop receiving data.
 *      }
 *  }
 * }}}
 *
 * A custom receiver in Java would look like this.
 *
 * {{{
 * class MyReceiver extends Receiver<String> {
 *     public MyReceiver(StorageLevel storageLevel) {
 *         super(storageLevel);
 *     }
 *
 *     public void onStart() {
 *          // Setup stuff (start threads, open sockets, etc.) to start receiving data.
 *          // Must start new thread to receive data, as onStart() must be non-blocking.
 *
 *          // Call store(...) in those threads to store received data into Spark's memory.
 *
 *          // Call stop(...), restart(...) or reportError(...) on any thread based on how
 *          // different errors needs to be handled.
 *
 *          // See corresponding method documentation for more details
 *     }
 *
 *     public void onStop() {
 *          // Cleanup stuff (stop threads, close sockets, etc.) to stop receiving data.
 *     }
 * }
 * }}}
 */
@DeveloperApi
abstract class Receiver[T](val storageLevel: StorageLevel) extends Serializable {

2、ReceiverSupervisor类：

/**
 * Abstract class that is responsible for supervising a Receiver in the worker.
 * It provides all the necessary interfaces for handling the data received by the receiver.
 */
private[streaming] abstract class ReceiverSupervisor(
    receiver: Receiver[_],
    conf: SparkConf
  ) extends Logging {

ReceiverTracker发送一个个Job，每个Job有一个task，每个task中有一个ReceiverSupervisor，用于启动每个Receiver的，看ReceiverTracker的start方法：

/**
  * 管理receiver的：启动、执行、重新启动
  * 确定所有的输入流记录，有成员记录所有输入来源
  * 需要输入流，为每个输入流启动一个receiver
 * This class manages the execution of the receivers of ReceiverInputDStreams. Instance of
 * this class must be created after all input streams have been added and StreamingContext.start()
 * has been called because it needs the final set of input streams at the time of instantiation.
 *dirver端
 * @param skipReceiverLaunch Do not launch the receiver. This is useful for testing.
 */
private[streaming]
class ReceiverTracker(ssc: StreamingContext, skipReceiverLaunch: Boolean = false) extends Logging {

  private val receiverInputStreams = ssc.graph.getReceiverInputStreams()
  private val receiverInputStreamIds = receiverInputStreams.map { _.id }
  private val receivedBlockTracker = new ReceivedBlockTracker(
    ssc.sparkContext.conf,
    ssc.sparkContext.hadoopConfiguration,
    receiverInputStreamIds,
    ssc.scheduler.clock,
    ssc.isCheckpointPresent,
    Option(ssc.checkpointDir)
  )
  private val listenerBus = ssc.scheduler.listenerBus

  /** Enumeration to identify current state of the ReceiverTracker */
  object TrackerState extends Enumeration {
    type TrackerState = Value
    val Initialized, Started, Stopping, Stopped = Value
  }
  import TrackerState._

  /** State of the tracker. Protected by "trackerStateLock" */
  @volatile private var trackerState = Initialized

  // endpoint is created when generator starts.
  // This not being null means the tracker has been started and not stopped
  private var endpoint: RpcEndpointRef = null

  private val schedulingPolicy = new ReceiverSchedulingPolicy()

  // Track the active receiver job number. When a receiver job exits ultimately, countDown will
  // be called.
  private val receiverJobExitLatch = new CountDownLatch(receiverInputStreams.size)

  /**
   * Track all receivers' information. The key is the receiver id, the value is the receiver info.
   * It's only accessed in ReceiverTrackerEndpoint.
   */
  private val receiverTrackingInfos = new HashMap[Int, ReceiverTrackingInfo]

  /**
   * Store all preferred locations for all receivers. We need this information to schedule
   * receivers. It's only accessed in ReceiverTrackerEndpoint.
   */
  private val receiverPreferredLocations = new HashMap[Int, Option[String]]

  /** Start the endpoint and receiver execution thread. */
  def start(): Unit = synchronized {
    if (isTrackerStarted) {
      throw new SparkException("ReceiverTracker already started")
    }

    if (!receiverInputStreams.isEmpty) {
      endpoint = ssc.env.rpcEnv.setupEndpoint(
        "ReceiverTracker", new ReceiverTrackerEndpoint(ssc.env.rpcEnv))
      if (!skipReceiverLaunch) launchReceivers()
      logInfo("ReceiverTracker started")
      trackerState = Started
    }
  }
RDD中的元素必须要实现序列化，才能将RDD序列化传输给Executor端，Receiver就实现了Serializable接口，自定义的Receiver也必须实现Serializable接口。
@DeveloperApi
abstract class Receiver[T](val storageLevel: StorageLevel) extends Serializable {
处理Receiver接收到的数据，存储数据并汇报给Driver，Receiver是一条一条的接收数据的。

作用于rdd的function，内部就是一个个Receiver，代码里面需要启动的Receiver是谁，根据你输入的数据来源inputDStreams receiver，socketTextStream

相当于一个引用句柄socketReceiver，我们获得的Receiver是引用的描述，接收的数据其是下面的getReceiver产生的：

/**
 * Get the receivers from the ReceiverInputDStreams, distributes them to the
 * worker nodes as a parallel collection, and runs them.
 */
private def launchReceivers(): Unit = {
  val receivers = receiverInputStreams.map(nis => {
    val rcvr = nis.getReceiver()
    rcvr.setReceiverId(nis.id)
    rcvr
  })

  runDummySparkJob()

  logInfo("Starting " + receivers.length + " receivers")
  endpoint.send(StartAllReceivers(receivers))
}

private[streaming]
class ReceiverTracker(ssc: StreamingContext, skipReceiverLaunch: Boolean = false) extends Logging {
  private val receiverInputStreams = ssc.graph.getReceiverInputStreams()
  private val receiverInputStreamIds = receiverInputStreams.map { _.id }
  private val receivedBlockTracker = new ReceivedBlockTracker(
    ssc.sparkContext.conf,
    ssc.sparkContext.hadoopConfiguration,
    receiverInputStreamIds,
    ssc.scheduler.clock,
    ssc.isCheckpointPresent,
    Option(ssc.checkpointDir)
  )

private[streaming]
class SocketInputDStream[T: ClassTag](
    ssc_ : StreamingContext,
    host: String,
    port: Int,
    bytesToObjects: InputStream => Iterator[T],
    storageLevel: StorageLevel
  ) extends ReceiverInputDStream[T](ssc_) {

  def getReceiver(): Receiver[T] = {
    new SocketReceiver(host, port, bytesToObjects, storageLevel)
  }
}

private[streaming]
class SocketReceiver[T: ClassTag](
    host: String,
    port: Int,
    bytesToObjects: InputStream => Iterator[T],
    storageLevel: StorageLevel
  ) extends Receiver[T](storageLevel) with Logging {

  def onStart() {
    // Start the thread that receives data over a connection
    new Thread("Socket Receiver") {
      setDaemon(true)
      override def run() { receive() }
    }.start()
  }

如果Receiver RDD为空，则默认创建一个RDD,主要处理Receiver 接收到的数据，将接收数据给ReceiverSupervisor存储数据，并将元数据汇报给ReceiverTracker，Receiver 接收数据是一条条的，从抽象讲，是while循环获取一条条数据。接收数据，合并成buffer，放入block队列，在ReceiverSupervisorImpl启动会调用BlockGenerator对象的start方法。

override protected def onStart() {
  registeredBlockGenerators.foreach { _.start() }
}

/**
 * Generates batches of objects received by a
 * [[org.apache.spark.streaming.receiver.Receiver]] and puts them into appropriately
 * named blocks at regular intervals. This class starts two threads,
 * one to periodically start a new batch and prepare the previous batch of as a block,
 * the other to push the blocks into the block manager.
 *
 * Note: Do not create BlockGenerator instances directly inside receivers. Use
 * `ReceiverSupervisor.createBlockGenerator` to create a BlockGenerator and use it.
 */
private[streaming] class BlockGenerator(
    listener: BlockGeneratorListener,
    receiverId: Int,
    conf: SparkConf,
    clock: Clock = new SystemClock()
  ) extends RateLimiter(conf) with Logging {

  private case class Block(id: StreamBlockId, buffer: ArrayBuffer[Any])

  /**
   * The BlockGenerator can be in 5 possible states, in the order as follows.
   *
   *  - Initialized: Nothing has been started
   *  - Active: start() has been called, and it is generating blocks on added data.
   *  - StoppedAddingData: stop() has been called, the adding of data has been stopped,
   *                       but blocks are still being generated and pushed.
   *  - StoppedGeneratingBlocks: Generating of blocks has been stopped, but
   *                             they are still being pushed.
   *  - StoppedAll: Everything has stopped, and the BlockGenerator object can be GCed.
   */
  private object GeneratorState extends Enumeration {
    type GeneratorState = Value
    val Initialized, Active, StoppedAddingData, StoppedGeneratingBlocks, StoppedAll = Value
  }
  import GeneratorState._

  private val blockIntervalMs = conf.getTimeAsMs("spark.streaming.blockInterval", "200ms")
  require(blockIntervalMs > 0, s"'spark.streaming.blockInterval' should be a positive value")

  private val blockIntervalTimer =
    new RecurringTimer(clock, blockIntervalMs, updateCurrentBuffer, "BlockGenerator")
  private val blockQueueSize = conf.getInt("spark.streaming.blockQueueSize", 10)
  private val blocksForPushing = new ArrayBlockingQueue[Block](blockQueueSize)
  private val blockPushingThread = new Thread() { override def run() { keepPushingBlocks() } }

  @volatile private var currentBuffer = new ArrayBuffer[Any]
  @volatile private var state = Initialized

  /** Start block generating and pushing threads. */
  def start(): Unit = synchronized {
    if (state == Initialized) {
      state = Active
      blockIntervalTimer.start()
      blockPushingThread.start()
      logInfo("Started BlockGenerator")
    } else {
      throw new SparkException(
        s"Cannot start BlockGenerator as its not in the Initialized state [state = $state]")
    }
  }
BlockGenerator类是用来干什么的？从上述的源码注释可以说明该类来把一个Receiver接收到的数据合并到一个Block然后写入到BlockManager对象中。
该类内部有两个线程，一个是周期性把数据生成一批对象，然后把先前的一批数据封装成Block。另一个线程时把Block写入到BlockManager进行存储。

override def createBlockGenerator(
    blockGeneratorListener: BlockGeneratorListener): BlockGenerator = {
  // Cleanup BlockGenerators that have already been stopped
  registeredBlockGenerators --= registeredBlockGenerators.filter{ _.isStopped() }

  val newBlockGenerator = new BlockGenerator(blockGeneratorListener, streamId, env.conf)
  registeredBlockGenerators += newBlockGenerator
  newBlockGenerator
}

BlockGenerator类继承自ReateLimiter类，说明我们不能限定接收数据的速度，但是可以限定存储数据的速度，转过来就限定流动的速度。

BlockGenerator类有一个定时器（默认每200ms将接收到的数据合并成block）和一个线程(把block写入到BlockManager)，200ms会产生一个Block，即1秒钟生成5个Partition。太小则生成的数据片中数据太小，导致一个Task处理的数据少，性能差。实际经验得到不要低于50msprivate val blockIntervalMs = conf.getTimeAsMs("spark.streaming.blockInterval", "200ms")

require(blockIntervalMs > 0, s"'spark.streaming.blockInterval' should be a positive value")
private val blockIntervalTimer =
  new RecurringTimer(clock, blockIntervalMs, updateCurrentBuffer, "BlockGenerator")
private val blockQueueSize = conf.getInt("spark.streaming.blockQueueSize", 10)
private val blocksForPushing = new ArrayBlockingQueue[Block](blockQueueSize)
private val blockPushingThread = new Thread() { override def run() { keepPushingBlocks() } }

微信公众号：DT_Spark

博客：http://blog.sina.com.cn/ilovepains

手机：[phone]

QQ：1740415547

邮箱：[e-mail]

Spark发行版笔记10