工作中要使用锐捷的AP和AC进行组网。记录一下RG-AP220-E配置成瘦AP的方法。
使用console口连接，baudrate rate: 9600, 8n1
瘦AP：console密码是ruijie，enable密码是apdebug
胖AP：console密码是admin，没有默认enable密码。
User Access Verification
Password:
Ruijie>enable
Password:
Ruijie#ap-m ?
fat Fat mode
fit Fit mode
Ruijie#ap-m fit
apmode will change to FIT.
Ruijie#show ap-m
current mode: fit
Ruijie#show ip ?
arp Show IP ARP
interface IP interface status and configuration
packet IP packet
raw-socket Show raw socket
ref Show Ruijie Express Forward information
route IP routing table
sockets Show IPv4 sockets
udp Show UDP sockets
Ruijie#show ip interface
BVI 1
IP interface state is: UP
IP interface type is: BROADCAST
IP interface MTU is: 1500
IP address is:
192.168.110.1/24 (primary)
IP address negotiate is: OFF
Forward direct-broadcast is: OFF
ICMP mask reply is: ON
Send ICMP redirect is: ON
Send ICMP unreachable is: ON
DHCP relay is: OFF
Fast switch is: ON
Help address is:
Proxy ARP is: OFF
ARP packet input number: 0
Request packet : 0
Reply packet : 0
Unknown packet : 0
TTL invalid packet number: 0
ICMP packet input number: 0
Echo request : 0
Echo reply : 0
Unreachable : 0
＃退出
Ruijie#end
# 保存
Ruijie>write
Tony Liu
2017-12-21