一次断电，导致实体机关机了，虚拟机也连不上去，只好手动来起来。
我想增加一下自启动，让硬件开机的时候，自动启动虚拟机；
其实是有办法的，尝试了一下，也成功了，这里简单标记下。
virsh autostart dev
要想停止开机自启动
virsh autostart --disable dev
注意：上面的dev是机器名称，看下下面截图，就明白了。
当然，virsh有很多命令可用，一般help基本都明白了。
virsh # help Grouped commands: Domain Management (help keyword 'domain'): attach-device attach device from an XML file attach-disk attach disk device attach-interface attach network interface autostart autostart a domain blkdeviotune Set or query a block device I/O tuning parameters. blkiotune Get or set blkio parameters blockcommit Start a block commit operation. blockcopy Start a block copy operation. blockjob Manage active block operations blockpull Populate a disk from its backing image. blockresize Resize block device of domain. change-media Change media of CD or floppy drive console connect to the guest console cpu-baseline compute baseline CPU cpu-compare compare host CPU with a CPU described by an XML file cpu-stats show domain cpu statistics create create a domain from an XML file define define (but don't start) a domain from an XML file desc show or set domain's description or title destroy destroy (stop) a domain detach-device detach device from an XML file detach-disk detach disk device detach-interface detach network interface domdisplay domain display connection URI domfsfreeze Freeze domain's mounted filesystems. domfsthaw Thaw domain's mounted filesystems. domfsinfo Get information of domain's mounted filesystems. domfstrim Invoke fstrim on domain's mounted filesystems. domhostname print the domain's hostname domid convert a domain name or UUID to domain id domif-setlink set link state of a virtual interface domiftune get/set parameters of a virtual interface domjobabort abort active domain job domjobinfo domain job information domname convert a domain id or UUID to domain name domrename rename a domain dompmsuspend suspend a domain gracefully using power management functions dompmwakeup wakeup a domain from pmsuspended state domuuid convert a domain name or id to domain UUID domxml-from-native Convert native config to domain XML domxml-to-native Convert domain XML to native config dump dump the core of a domain to a file for analysis dumpxml domain information in XML edit edit XML configuration for a domain event Domain Events inject-nmi Inject NMI to the guest iothreadinfo view domain IOThreads iothreadpin control domain IOThread affinity iothreadadd add an IOThread to the guest domain iothreaddel delete an IOThread from the guest domain send-key Send keycodes to the guest send-process-signal Send signals to processes lxc-enter-namespace LXC Guest Enter Namespace managedsave managed save of a domain state managedsave-remove Remove managed save of a domain memtune Get or set memory parameters perf Get or set perf event metadata show or set domain's custom XML metadata migrate migrate domain to another host migrate-setmaxdowntime set maximum tolerable downtime migrate-compcache get/set compression cache size migrate-setspeed Set the maximum migration bandwidth migrate-getspeed Get the maximum migration bandwidth migrate-postcopy Switch running migration from pre-copy to post-copy numatune Get or set numa parameters qemu-attach QEMU Attach qemu-monitor-command QEMU Monitor Command qemu-monitor-event QEMU Monitor Events qemu-agent-command QEMU Guest Agent Command reboot reboot a domain reset reset a domain restore restore a domain from a saved state in a file resume resume a domain save save a domain state to a file save-image-define redefine the XML for a domain's saved state file save-image-dumpxml saved state domain information in XML save-image-edit edit XML for a domain's saved state file schedinfo show/set scheduler parameters screenshot take a screenshot of a current domain console and store it into a file set-user-password set the user password inside the domain setmaxmem change maximum memory limit setmem change memory allocation setvcpus change number of virtual CPUs shutdown gracefully shutdown a domain start start a (previously defined) inactive domain suspend suspend a domain ttyconsole tty console undefine undefine a domain update-device update device from an XML file vcpucount domain vcpu counts vcpuinfo detailed domain vcpu information vcpupin control or query domain vcpu affinity emulatorpin control or query domain emulator affinity vncdisplay vnc display guestvcpus query or modify state of vcpu in the guest (via agent) setvcpu attach/detach vcpu or groups of threads domblkthreshold set the threshold for block-threshold event for a given block device or it's backing chain element Domain Monitoring (help keyword 'monitor'): domblkerror Show errors on block devices domblkinfo domain block device size information domblklist list all domain blocks domblkstat get device block stats for a domain domcontrol domain control interface state domif-getlink get link state of a virtual interface domifaddr Get network interfaces' addresses for a running domain domiflist list all domain virtual interfaces domifstat get network interface stats for a domain dominfo domain information dommemstat get memory statistics for a domain domstate domain state domstats get statistics about one or multiple domains domtime domain time list list domains Host and Hypervisor (help keyword 'host'): allocpages Manipulate pages pool size capabilities capabilities cpu-models CPU models domcapabilities domain capabilities freecell NUMA free memory freepages NUMA free pages hostname print the hypervisor hostname maxvcpus connection vcpu maximum node-memory-tune Get or set node memory parameters nodecpumap node cpu map nodecpustats Prints cpu stats of the node. nodeinfo node information nodememstats Prints memory stats of the node. nodesuspend suspend the host node for a given time duration sysinfo print the hypervisor sysinfo uri print the hypervisor canonical URI version show version Interface (help keyword 'interface'): iface-begin create a snapshot of current interfaces settings, which can be later committed (iface-commit) or restored (iface-rollback) iface-bridge create a bridge device and attach an existing network device to it iface-commit commit changes made since iface-begin and free restore point iface-define define an inactive persistent physical host interface or modify an existing persistent one from an XML file iface-destroy destroy a physical host interface (disable it / "if-down") iface-dumpxml interface information in XML iface-edit edit XML configuration for a physical host interface iface-list list physical host interfaces iface-mac convert an interface name to interface MAC address iface-name convert an interface MAC address to interface name iface-rollback rollback to previous saved configuration created via iface-begin iface-start start a physical host interface (enable it / "if-up") iface-unbridge undefine a bridge device after detaching its slave device iface-undefine undefine a physical host interface (remove it from configuration) Network Filter (help keyword 'filter'): nwfilter-define define or update a network filter from an XML file nwfilter-dumpxml network filter information in XML nwfilter-edit edit XML configuration for a network filter nwfilter-list list network filters nwfilter-undefine undefine a network filter Networking (help keyword 'network'): net-autostart autostart a network net-create create a network from an XML file net-define define an inactive persistent virtual network or modify an existing persistent one from an XML file net-destroy destroy (stop) a network net-dhcp-leases print lease info for a given network net-dumpxml network information in XML net-edit edit XML configuration for a network net-event Network Events net-info network information net-list list networks net-name convert a network UUID to network name net-start start a (previously defined) inactive network net-undefine undefine a persistent network net-update update parts of an existing network's configuration net-uuid convert a network name to network UUID Node Device (help keyword 'nodedev'): nodedev-create create a device defined by an XML file on the node nodedev-destroy destroy (stop) a device on the node nodedev-detach detach node device from its device driver nodedev-dumpxml node device details in XML nodedev-list enumerate devices on this host nodedev-reattach reattach node device to its device driver nodedev-reset reset node device nodedev-event Node Device Events Secret (help keyword 'secret'): secret-define define or modify a secret from an XML file secret-dumpxml secret attributes in XML secret-event Secret Events secret-get-value Output a secret value secret-list list secrets secret-set-value set a secret value secret-undefine undefine a secret Snapshot (help keyword 'snapshot'): snapshot-create Create a snapshot from XML snapshot-create-as Create a snapshot from a set of args snapshot-current Get or set the current snapshot snapshot-delete Delete a domain snapshot snapshot-dumpxml Dump XML for a domain snapshot snapshot-edit edit XML for a snapshot snapshot-info snapshot information snapshot-list List snapshots for a domain snapshot-parent Get the name of the parent of a snapshot snapshot-revert Revert a domain to a snapshot Storage Pool (help keyword 'pool'): find-storage-pool-sources-as find potential storage pool sources find-storage-pool-sources discover potential storage pool sources pool-autostart autostart a pool pool-build build a pool pool-create-as create a pool from a set of args pool-create create a pool from an XML file pool-define-as define a pool from a set of args pool-define define an inactive persistent storage pool or modify an existing persistent one from an XML file pool-delete delete a pool pool-destroy destroy (stop) a pool pool-dumpxml pool information in XML pool-edit edit XML configuration for a storage pool pool-info storage pool information pool-list list pools pool-name convert a pool UUID to pool name pool-refresh refresh a pool pool-start start a (previously defined) inactive pool pool-undefine undefine an inactive pool pool-uuid convert a pool name to pool UUID pool-event Storage Pool Events Storage Volume (help keyword 'volume'): vol-clone clone a volume. vol-create-as create a volume from a set of args vol-create create a vol from an XML file vol-create-from create a vol, using another volume as input vol-delete delete a vol vol-download download volume contents to a file vol-dumpxml vol information in XML vol-info storage vol information vol-key returns the volume key for a given volume name or path vol-list list vols vol-name returns the volume name for a given volume key or path vol-path returns the volume path for a given volume name or key vol-pool returns the storage pool for a given volume key or path vol-resize resize a vol vol-upload upload file contents to a volume vol-wipe wipe a vol Virsh itself (help keyword 'virsh'): cd change the current directory echo echo arguments exit quit this interactive terminal help print help pwd print the current directory quit quit this interactive terminal connect (re)connect to hypervisor
补充部分Virsh操作命令，如下：
libvirt是一个通用的虚拟化框架，支持xen，kvm，lxc多种虚拟化技术，本文作为一个笔记。
设置LXC为默认（默认为qemu）
export LIBVIRT_DEFAULT_URI=lxc:///
virsh -c lxc:/// 可省略
网络设置
NAT
NAT是libvirt默认自带，叫做default，通过下面的 命令查看
virsh net-list
假设宿主机有两个网卡，eth0为内网，eth1为外网，我们可以为容器桥接出两个接口：
#cat lan.xml
<network> <name>lan</name> <forward mode="bridge" /> <interface dev="eth0" /> </network>
#cat wan.xml
<network> <name>wan</name> <forward mode="bridge" /> <interface dev="eth1" /> </network>
导入配置 virsh net-define lan.xm virsh net-define wan.xml
开启网卡
virsh net-start lan virsh net-autostart lan virsh net-start wan virsh net-autostart wan
应用容器
应用容器共享宿主机的各种资源，包括内核，各种软件包，各种库，它仅有一个独立的运行空间，像是一个沙箱环境。
创建一个名为web的应用容器
cat web.xml
<domain type="lxc"> <name>web</name> <memory>102400</memory> <os> <type>exec</type> <init>/bin/sh</init> </os> <device> <console type="pty" /> </device> </domain>
导入virsh
virsh define web.xml
开机启动
virsh autostart web
进入容器
virsh console web
编辑容器配置
virsh edit web
删除容器
virsh undefine web
操作系统容器
操作系统容器除了Linux内核，自己包含一整套运行环境，像是一个chroot环境。
操作系统容器创建稍稍复杂一点
1、创建根目录
mkdir -p /lxc/centos7
2、下载并解压镜像 http://images.linuxcontainers.org/images/centos/7/amd64/default/20140807_02:37/rootfs.tar.xz
cd /lxc/centos7 wget xxx xz -d rootfs.tar.xz tar xvf rootfs.tar
3、创建xml模板
cat centos7.xml
<domain type="lxc"> <name>centos7</name> <memory unit="KiB">1048576</memory> <currentMemory unit="KiB">1048576</currentMemory> <resource> <partition>/machine</partition> </resource> <os> <clock offset='utc' /> <on_poweroff>destory</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart<on_crash> </devices> <emulator>/usr/lib/libvirt/libvirt_lxc</emulator> <filesystem type='mount' accessmode='passthrough'> <source dir='/lxc/centos7'/> <target dir='/'/> </filesystem> <interface type='network'> <mac address='00:16:3e:52:87:f1'/> <source network='lan'/> </interface> <console type='pty'> <target type='lxc' port='0'/> </console> </devices> </domain>
导入容器
virsh define centos7.xml
启动容器
virsh start centos7 virsh autostart centos7
进入容器
virsh console centos7
停止开机启动
virsh autostart --disable centos7
退出lxc console
ctrl+]
另外，补充一个服务自启动的，可以参考，比较简单，就两条命令好了，刚才顺手也添加了一下。
vi /etc/rc.d/rc.local
touch /var/lock/subsys/local /home/bgop/start_redis.sh & /home/bgop/start_nexus.sh &
shell如下：
[root@localhost ~]# cat /home/bgop/start_redis.sh #/bin/sh /usr/local/bin/redis-server /mnt/softwares/redis-2.8.3/redis.conf [root@localhost ~]# cat /home/bgop/start_nexus.sh #/bin/sh /mnt/softwares/nexus-2.14.4-03/bin/nexus
目前机器正常，下次断电后，补充测试结果