highgui.h备查 分类: C/C++ OpenCV 2014-11-08 18:11 292人阅读 评论(0) 收藏

时间:2022-12-17 15:04:58
/*M///////////////////////////////////////////////////////////////////////////////////////
//
// IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
// By downloading, copying, installing or using the software you agree to this license.
// If you do not agree to this license, do not download, install,
// copy or use the software.
//
//
// Intel License Agreement
// For Open Source Computer Vision Library
//
// Copyright (C) 2000, Intel Corporation, all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
// * Redistribution's of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// * Redistribution's in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// * The name of Intel Corporation may not be used to endorse or promote products
// derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/
#ifndef __OPENCV_HIGHGUI_H__
#define __OPENCV_HIGHGUI_H__
#include "opencv2/core/core_c.h"
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/****************************************************************************************\
* Basic GUI functions *
\****************************************************************************************/
//YV
//-----------New for Qt
/* For font */
enum { CV_FONT_LIGHT = 25, //QFont::Light,
CV_FONT_NORMAL = 50, //QFont::Normal,
CV_FONT_DEMIBOLD = 63, //QFont::DemiBold,
CV_FONT_BOLD = 75, //QFont::Bold,
CV_FONT_BLACK = 87 //QFont::Black
};
enum { CV_STYLE_NORMAL = 0,//QFont::StyleNormal,
CV_STYLE_ITALIC = 1, //QFont::StyleItalic,
CV_STYLE_OBLIQUE = 2 //QFont::StyleOblique
};
/* ---------*/
//for color cvScalar(blue_component, green_component, red\_component[, alpha_component])
//and alpha= 0 <-> 0xFF (not transparent <-> transparent)
CVAPI(CvFont) cvFontQt( const char * nameFont, int pointSize CV_DEFAULT(-1), CvScalar color CV_DEFAULT(cvScalarAll(0)), int weight CV_DEFAULT(CV_FONT_NORMAL), int style CV_DEFAULT(CV_STYLE_NORMAL), int spacing CV_DEFAULT(0));
CVAPI(void) cvAddText( const CvArr* img, const char* text, CvPoint org, CvFont *arg2);
CVAPI(void) cvDisplayOverlay( const char * name, const char* text, int delayms);
CVAPI(void) cvDisplayStatusBar( const char * name, const char* text, int delayms);
typedef void (CV_CDECL *CvOpenGLCallback)(void* userdata);
CVAPI(void) cvCreateOpenGLCallback( const char * window_name, CvOpenGLCallback callbackOpenGL, void* userdata CV_DEFAULT(NULL), double angle CV_DEFAULT(-1), double zmin CV_DEFAULT(-1), double zmax CV_DEFAULT(-1));
CVAPI(void) cvSaveWindowParameters( const char * name);
CVAPI(void) cvLoadWindowParameters( const char * name);
CVAPI(int) cvStartLoop( int (*pt2Func)(int argc, char *argv[]), int argc, char * argv[]);
CVAPI(void) cvStopLoop();
typedef void (CV_CDECL *CvButtonCallback)(int state, void* userdata);
enum {CV_PUSH_BUTTON = 0, CV_CHECKBOX = 1, CV_RADIOBOX = 2};
CVAPI(int) cvCreateButton( const char * button_name CV_DEFAULT(NULL),CvButtonCallback on_change CV_DEFAULT(NULL), void * userdata CV_DEFAULT(NULL) , int button_type CV_DEFAULT(CV_PUSH_BUTTON), int initial_button_state CV_DEFAULT(0));
//----------------------
/* this function is used to set some external parameters in case of X Window */
CVAPI(int) cvInitSystem( int argc, char ** argv );
CVAPI(int) cvStartWindowThread();
// --------- YV ---------
enum
{
//These 3 flags are used by cvSet/GetWindowProperty
CV_WND_PROP_FULLSCREEN = 0, //to change/get window's fullscreen property
CV_WND_PROP_AUTOSIZE = 1, //to change/get window's autosize property
CV_WND_PROP_ASPECTRATIO= 2, //to change/get window's aspectratio property
//
//These 2 flags are used by cvNamedWindow and cvSet/GetWindowProperty
CV_WINDOW_NORMAL = 0x00000000, //the user can resize the window (no constraint) / also use to switch a fullscreen window to a normal size
CV_WINDOW_AUTOSIZE = 0x00000001, //the user cannot resize the window, the size is constrainted by the image displayed
//
//Those flags are only for Qt
CV_GUI_EXPANDED = 0x00000000, //status bar and tool bar
CV_GUI_NORMAL = 0x00000010, //old fashious way
//
//These 3 flags are used by cvNamedWindow and cvSet/GetWindowProperty
CV_WINDOW_FULLSCREEN = 1, //change the window to fullscreen
CV_WINDOW_FREERATIO = 0x00000100, //the image expends as much as it can (no ratio constraint)
CV_WINDOW_KEEPRATIO = 0x00000000 //the ration image is respected.
};
/* create window */
CVAPI(int) cvNamedWindow( const char * name, int flags CV_DEFAULT(CV_WINDOW_AUTOSIZE) );
/* Set and Get Property of the window */
CVAPI(void) cvSetWindowProperty( const char * name, int prop_id, double prop_value);
CVAPI(double) cvGetWindowProperty( const char * name, int prop_id);
/* display image within window (highgui windows remember their content) */
CVAPI(void) cvShowImage( const char * name, const CvArr* image );
/* resize/move window */
CVAPI(void) cvResizeWindow( const char * name, int width, int height );
CVAPI(void) cvMoveWindow( const char * name, int x, int y );
/* destroy window and all the trackers associated with it */
CVAPI(void) cvDestroyWindow( const char * name );
CVAPI(void) cvDestroyAllWindows( void);
/* get native window handle (HWND in case of Win32 and Widget in case of X Window) */
CVAPI(void*) cvGetWindowHandle( const char * name );
/* get name of highgui window given its native handle */
CVAPI(const char*) cvGetWindowName( void * window_handle );
typedef void (CV_CDECL *CvTrackbarCallback)(int pos);
/* create trackbar and display it on top of given window, set callback */
CVAPI(int) cvCreateTrackbar( const char * trackbar_name, const char* window_name,
int* value, int count, CvTrackbarCallback on_change CV_DEFAULT(NULL));
typedef void (CV_CDECL *CvTrackbarCallback2)(int pos, void* userdata);
CVAPI(int) cvCreateTrackbar2( const char * trackbar_name, const char* window_name,
int* value, int count, CvTrackbarCallback2 on_change,
void* userdata CV_DEFAULT(0));
/* retrieve or set trackbar position */
CVAPI(int) cvGetTrackbarPos( const char * trackbar_name, const char* window_name );
CVAPI(void) cvSetTrackbarPos( const char * trackbar_name, const char* window_name, int pos );
enum
{
CV_EVENT_MOUSEMOVE =0,
CV_EVENT_LBUTTONDOWN =1,
CV_EVENT_RBUTTONDOWN =2,
CV_EVENT_MBUTTONDOWN =3,
CV_EVENT_LBUTTONUP =4,
CV_EVENT_RBUTTONUP =5,
CV_EVENT_MBUTTONUP =6,
CV_EVENT_LBUTTONDBLCLK =7,
CV_EVENT_RBUTTONDBLCLK =8,
CV_EVENT_MBUTTONDBLCLK =9
};
enum
{
CV_EVENT_FLAG_LBUTTON =1,
CV_EVENT_FLAG_RBUTTON =2,
CV_EVENT_FLAG_MBUTTON =4,
CV_EVENT_FLAG_CTRLKEY =8,
CV_EVENT_FLAG_SHIFTKEY =16,
CV_EVENT_FLAG_ALTKEY =32
};
typedef void (CV_CDECL *CvMouseCallback )(int event, int x, int y, int flags, void * param);
/* assign callback for mouse events */
CVAPI(void) cvSetMouseCallback( const char * window_name, CvMouseCallback on_mouse,
void* param CV_DEFAULT(NULL));
enum
{
/* 8bit, color or not */
CV_LOAD_IMAGE_UNCHANGED =-1,
/* 8bit, gray */
CV_LOAD_IMAGE_GRAYSCALE =0,
/* ?, color */
CV_LOAD_IMAGE_COLOR =1,
/* any depth, ? */
CV_LOAD_IMAGE_ANYDEPTH =2,
/* ?, any color */
CV_LOAD_IMAGE_ANYCOLOR =4
};
/* load image from file
iscolor can be a combination of above flags where CV_LOAD_IMAGE_UNCHANGED
overrides the other flags
using CV_LOAD_IMAGE_ANYCOLOR alone is equivalent to CV_LOAD_IMAGE_UNCHANGED
unless CV_LOAD_IMAGE_ANYDEPTH is specified images are converted to 8bit
*/
CVAPI(IplImage*) cvLoadImage( const char * filename, int iscolor CV_DEFAULT(CV_LOAD_IMAGE_COLOR));
CVAPI(CvMat*) cvLoadImageM( const char * filename, int iscolor CV_DEFAULT(CV_LOAD_IMAGE_COLOR));
enum
{
CV_IMWRITE_JPEG_QUALITY =1,
CV_IMWRITE_PNG_COMPRESSION =16,
CV_IMWRITE_PXM_BINARY =32
};
/* save image to file */
CVAPI(int) cvSaveImage( const char * filename, const CvArr* image,
const int * params CV_DEFAULT(0) );
/* decode image stored in the buffer */
CVAPI(IplImage*) cvDecodeImage( const CvMat* buf, int iscolor CV_DEFAULT(CV_LOAD_IMAGE_COLOR));
CVAPI(CvMat*) cvDecodeImageM( const CvMat* buf, int iscolor CV_DEFAULT(CV_LOAD_IMAGE_COLOR));
/* encode image and store the result as a byte vector (single-row 8uC1 matrix) */
CVAPI(CvMat*) cvEncodeImage( const char * ext, const CvArr* image,
const int * params CV_DEFAULT(0) );
enum
{
CV_CVTIMG_FLIP =1,
CV_CVTIMG_SWAP_RB =2
};
/* utility function: convert one image to another with optional vertical flip */
CVAPI(void) cvConvertImage( const CvArr* src, CvArr* dst, int flags CV_DEFAULT(0));
/* wait for key event infinitely (delay<=0) or for "delay" milliseconds */
CVAPI(int) cvWaitKey( int delay CV_DEFAULT(0));
/****************************************************************************************\
* Working with Video Files and Cameras *
\****************************************************************************************/
/* "black box" capture structure */
typedef struct CvCapture CvCapture;
/* start capturing frames from video file */
CVAPI(CvCapture*) cvCreateFileCapture( const char * filename );
enum
{
CV_CAP_ANY =0, // autodetect
CV_CAP_MIL =100, // MIL proprietary drivers
CV_CAP_VFW =200, // platform native
CV_CAP_V4L =200,
CV_CAP_V4L2 =200,
CV_CAP_FIREWARE =300, // IEEE 1394 drivers
CV_CAP_FIREWIRE =300,
CV_CAP_IEEE1394 =300,
CV_CAP_DC1394 =300,
CV_CAP_CMU1394 =300,
CV_CAP_STEREO =400, // TYZX proprietary drivers
CV_CAP_TYZX =400,
CV_TYZX_LEFT =400,
CV_TYZX_RIGHT =401,
CV_TYZX_COLOR =402,
CV_TYZX_Z =403,
CV_CAP_QT =500, // QuickTime
CV_CAP_UNICAP =600, // Unicap drivers
CV_CAP_DSHOW =700, // DirectShow (via videoInput)
CV_CAP_PVAPI =800, // PvAPI, Prosilica GigE SDK
CV_CAP_OPENNI =900, // OpenNI (for Kinect)
CV_CAP_ANDROID =1000, // Android CV_CAP_XIAPI =1100 // XIMEA Camera API
};
/* start capturing frames from camera: index = camera_index + domain_offset (CV_CAP_*) */
CVAPI(CvCapture*) cvCreateCameraCapture( int index );
/* grab a frame, return 1 on success, 0 on fail.
this function is thought to be fast */
CVAPI(int) cvGrabFrame( CvCapture* capture );
/* get the frame grabbed with cvGrabFrame(..)
This function may apply some frame processing like
frame decompression, flipping etc.
!!!DO NOT RELEASE or MODIFY the retrieved frame!!! */
CVAPI(IplImage*) cvRetrieveFrame( CvCapture* capture, int streamIdx CV_DEFAULT(0) );
/* Just a combination of cvGrabFrame and cvRetrieveFrame
!!!DO NOT RELEASE or MODIFY the retrieved frame!!! */
CVAPI(IplImage*) cvQueryFrame( CvCapture* capture );
/* stop capturing/reading and free resources */
CVAPI(void) cvReleaseCapture( CvCapture** capture );
enum
{
// modes of the controlling registers (can be: auto, manual, auto single push, absolute Latter allowed with any other mode)
// every feature can have only one mode turned on at a time
CV_CAP_PROP_DC1394_OFF = -4, //turn the feature off (not controlled manually nor automatically)
CV_CAP_PROP_DC1394_MODE_MANUAL = -3, //set automatically when a value of the feature is set by the user
CV_CAP_PROP_DC1394_MODE_AUTO = -2,
CV_CAP_PROP_DC1394_MODE_ONE_PUSH_AUTO = -1,
CV_CAP_PROP_POS_MSEC =0,
CV_CAP_PROP_POS_FRAMES =1,
CV_CAP_PROP_POS_AVI_RATIO =2,
CV_CAP_PROP_FRAME_WIDTH =3,
CV_CAP_PROP_FRAME_HEIGHT =4,
CV_CAP_PROP_FPS =5,
CV_CAP_PROP_FOURCC =6,
CV_CAP_PROP_FRAME_COUNT =7,
CV_CAP_PROP_FORMAT =8,
CV_CAP_PROP_MODE =9,
CV_CAP_PROP_BRIGHTNESS =10,
CV_CAP_PROP_CONTRAST =11,
CV_CAP_PROP_SATURATION =12,
CV_CAP_PROP_HUE =13,
CV_CAP_PROP_GAIN =14,
CV_CAP_PROP_EXPOSURE =15,
CV_CAP_PROP_CONVERT_RGB =16,
CV_CAP_PROP_WHITE_BALANCE_BLUE_U =17,
CV_CAP_PROP_RECTIFICATION =18,
CV_CAP_PROP_MONOCROME =19,
CV_CAP_PROP_SHARPNESS =20,
CV_CAP_PROP_AUTO_EXPOSURE =21, // exposure control done by camera,
// user can adjust refernce level
// using this feature
CV_CAP_PROP_GAMMA =22,
CV_CAP_PROP_TEMPERATURE =23,
CV_CAP_PROP_TRIGGER =24,
CV_CAP_PROP_TRIGGER_DELAY =25,
CV_CAP_PROP_WHITE_BALANCE_RED_V =26,
CV_CAP_PROP_MAX_DC1394 =27,
CV_CAP_PROP_AUTOGRAB =1024, // property for highgui class CvCapture_Android only
CV_CAP_PROP_SUPPORTED_PREVIEW_SIZES_STRING=1025, // readonly, tricky property, returns cpnst char* indeed
CV_CAP_PROP_PREVIEW_FORMAT=1026, // readonly, tricky property, returns cpnst char* indeed
// OpenNI map generators
CV_CAP_OPENNI_DEPTH_GENERATOR = 0,
CV_CAP_OPENNI_IMAGE_GENERATOR = 1 << 31,
CV_CAP_OPENNI_GENERATORS_MASK = 1 << 31,
// Properties of cameras available through OpenNI interfaces
CV_CAP_PROP_OPENNI_OUTPUT_MODE = 100,
CV_CAP_PROP_OPENNI_FRAME_MAX_DEPTH = 101, // in mm
CV_CAP_PROP_OPENNI_BASELINE = 102, // in mm
CV_CAP_PROP_OPENNI_FOCAL_LENGTH = 103, // in pixels
CV_CAP_PROP_OPENNI_REGISTRATION_ON = 104, // flag
CV_CAP_PROP_OPENNI_REGISTRATION = CV_CAP_PROP_OPENNI_REGISTRATION_ON, // flag that synchronizes the remapping depth map to image map
// by changing depth generator's view point (if the flag is "on") or
// sets this view point to its normal one (if the flag is "off").
CV_CAP_OPENNI_IMAGE_GENERATOR_OUTPUT_MODE = CV_CAP_OPENNI_IMAGE_GENERATOR + CV_CAP_PROP_OPENNI_OUTPUT_MODE,
CV_CAP_OPENNI_DEPTH_GENERATOR_BASELINE = CV_CAP_OPENNI_DEPTH_GENERATOR + CV_CAP_PROP_OPENNI_BASELINE,
CV_CAP_OPENNI_DEPTH_GENERATOR_FOCAL_LENGTH = CV_CAP_OPENNI_DEPTH_GENERATOR + CV_CAP_PROP_OPENNI_FOCAL_LENGTH,
CV_CAP_OPENNI_DEPTH_GENERATOR_REGISTRATION_ON = CV_CAP_OPENNI_DEPTH_GENERATOR + CV_CAP_PROP_OPENNI_REGISTRATION_ON, // Properties of cameras available through GStreamer interface
CV_CAP_GSTREAMER_QUEUE_LENGTH = 200, // default is 1
CV_CAP_PROP_PVAPI_MULTICASTIP = 300, // ip for anable multicast master mode. 0 for disable multicast // Properties of cameras available through XIMEA SDK interface
CV_CAP_PROP_XI_DOWNSAMPLING = 400, // Change image resolution by binning or skipping.
CV_CAP_PROP_XI_DATA_FORMAT = 401, // Output data format.
CV_CAP_PROP_XI_OFFSET_X = 402, // Horizontal offset from the origin to the area of interest (in pixels).
CV_CAP_PROP_XI_OFFSET_Y = 403, // Vertical offset from the origin to the area of interest (in pixels).
CV_CAP_PROP_XI_TRG_SOURCE = 404, // Defines source of trigger.
CV_CAP_PROP_XI_TRG_SOFTWARE = 405, // Generates an internal trigger. PRM_TRG_SOURCE must be set to TRG_SOFTWARE.
CV_CAP_PROP_XI_GPI_SELECTOR = 406, // Selects general purpose input
CV_CAP_PROP_XI_GPI_MODE = 407, // Set general purpose input mode
CV_CAP_PROP_XI_GPI_LEVEL = 408, // Get general purpose level
CV_CAP_PROP_XI_GPO_SELECTOR = 409, // Selects general purpose output
CV_CAP_PROP_XI_GPO_MODE = 410, // Set general purpose output mode
CV_CAP_PROP_XI_LED_SELECTOR = 411, // Selects camera signalling LED
CV_CAP_PROP_XI_LED_MODE = 412, // Define camera signalling LED functionality
CV_CAP_PROP_XI_MANUAL_WB = 413, // Calculates White Balance(must be called during acquisition)
CV_CAP_PROP_XI_AUTO_WB = 414, // Automatic white balance
CV_CAP_PROP_XI_AEAG = 415, // Automatic exposure/gain
CV_CAP_PROP_XI_EXP_PRIORITY = 416, // Exposure priority (0.5 - exposure 50%, gain 50%).
CV_CAP_PROP_XI_AE_MAX_LIMIT = 417, // Maximum limit of exposure in AEAG procedure
CV_CAP_PROP_XI_AG_MAX_LIMIT = 418, // Maximum limit of gain in AEAG procedure
CV_CAP_PROP_XI_AEAG_LEVEL = 419, // Average intensity of output signal AEAG should achieve(in %)
CV_CAP_PROP_XI_TIMEOUT = 420 // Image capture timeout in milliseconds
};
enum
{
// Data given from depth generator.
CV_CAP_OPENNI_DEPTH_MAP = 0, // Depth values in mm (CV_16UC1)
CV_CAP_OPENNI_POINT_CLOUD_MAP = 1, // XYZ in meters (CV_32FC3)
CV_CAP_OPENNI_DISPARITY_MAP = 2, // Disparity in pixels (CV_8UC1)
CV_CAP_OPENNI_DISPARITY_MAP_32F = 3, // Disparity in pixels (CV_32FC1)
CV_CAP_OPENNI_VALID_DEPTH_MASK = 4, // CV_8UC1
// Data given from RGB image generator.
CV_CAP_OPENNI_BGR_IMAGE = 5,
CV_CAP_OPENNI_GRAY_IMAGE = 6
};
// Supported output modes of OpenNI image generator
enum
{
CV_CAP_OPENNI_VGA_30HZ = 0,
CV_CAP_OPENNI_SXGA_15HZ = 1
};
//supported by Android camera output formats
enum
{
CV_CAP_ANDROID_COLOR_FRAME_BGR = 0, //BGR
CV_CAP_ANDROID_COLOR_FRAME = CV_CAP_ANDROID_COLOR_FRAME_BGR,
CV_CAP_ANDROID_GREY_FRAME = 1, //Y
CV_CAP_ANDROID_COLOR_FRAME_RGB = 2,
CV_CAP_ANDROID_COLOR_FRAME_BGRA = 3,
CV_CAP_ANDROID_COLOR_FRAME_RGBA = 4
};
/* retrieve or set capture properties */
CVAPI(double) cvGetCaptureProperty( CvCapture* capture, int property_id );
CVAPI(int) cvSetCaptureProperty( CvCapture* capture, int property_id, double value );
// Return the type of the capturer (eg, CV_CAP_V4W, CV_CAP_UNICAP), which is unknown if created with CV_CAP_ANY
CVAPI(int) cvGetCaptureDomain( CvCapture* capture);
/* "black box" video file writer structure */
typedef struct CvVideoWriter CvVideoWriter;
CV_INLINE int CV_FOURCC( char c1, char c2, char c3, char c4)
{
return (c1 & 255) + ((c2 & 255) << 8) + ((c3 &255) << 16) + ((c4 & 255) << 24);
}
#define CV_FOURCC_PROMPT -1 /* Open Codec Selection Dialog (Windows only) */
#define CV_FOURCC_DEFAULT CV_FOURCC('I' , 'Y', 'U', 'V' ) /* Use default codec for specified filename (Linux only) */
/* initialize video file writer */
CVAPI(CvVideoWriter*) cvCreateVideoWriter( const char * filename, int fourcc,
double fps, CvSize frame_size,
int is_color CV_DEFAULT(1));
//CVAPI(CvVideoWriter*) cvCreateImageSequenceWriter( const char* filename,
// int is_color CV_DEFAULT(1));
/* write frame to video file */
CVAPI(int) cvWriteFrame( CvVideoWriter* writer, const IplImage* image );
/* close video file writer */
CVAPI(void) cvReleaseVideoWriter( CvVideoWriter** writer );
/****************************************************************************************\
* Obsolete functions/synonyms *
\****************************************************************************************/
#define cvCaptureFromFile cvCreateFileCapture
#define cvCaptureFromCAM cvCreateCameraCapture
#define cvCaptureFromAVI cvCaptureFromFile
#define cvCreateAVIWriter cvCreateVideoWriter
#define cvWriteToAVI cvWriteFrame
#define cvAddSearchPath(path)
#define cvvInitSystem cvInitSystem
#define cvvNamedWindow cvNamedWindow
#define cvvShowImage cvShowImage
#define cvvResizeWindow cvResizeWindow
#define cvvDestroyWindow cvDestroyWindow
#define cvvCreateTrackbar cvCreateTrackbar
#define cvvLoadImage(name) cvLoadImage((name),1)
#define cvvSaveImage cvSaveImage
#define cvvAddSearchPath cvAddSearchPath
#define cvvWaitKey(name) cvWaitKey(0)
#define cvvWaitKeyEx(name,delay) cvWaitKey(delay)
#define cvvConvertImage cvConvertImage
#define HG_AUTOSIZE CV_WINDOW_AUTOSIZE
#define set_preprocess_func cvSetPreprocessFuncWin32
#define set_postprocess_func cvSetPostprocessFuncWin32
#if defined WIN32 || defined _WIN32
CVAPI(void) cvSetPreprocessFuncWin32_( const void * callback);
CVAPI(void) cvSetPostprocessFuncWin32_( const void * callback);
#define cvSetPreprocessFuncWin32(callback) cvSetPreprocessFuncWin32_((const void*)(callback))
#define cvSetPostprocessFuncWin32(callback) cvSetPostprocessFuncWin32_((const void*)(callback))
#endif
#ifdef __cplusplus
}
#endif
#endif

版权声明:本文为博主原创文章,未经博主允许不得转载。

highgui.h备查 分类: C/C++ OpenCV 2014-11-08 18:11 292人阅读 评论(0) 收藏的更多相关文章

  1. OpenCV与QT联合编译 分类: Eye&lowbar;Detection ZedBoard OpenCV shell ubuntu 2014-11-08 18&colon;54 143人阅读 评论&lpar;0&rpar; 收藏

    问题1:首先参考rainysky的博客,发现qmake时发生找不到目录,文件的错误,又找不到 qmake.conf 文件的写法.所以开始按照网上的程序修改 XXX.pro 文件. 问题2:使用QT C ...

  2. 利用ssh传输文件 分类: 服务器搭建 Raspberry Pi 2015-04-12 18&colon;47 58人阅读 评论&lpar;0&rpar; 收藏

    在linux下一般用scp这个命令来通过ssh传输文件. 1.从服务器上下载文件 scp username@servername:/path/filename /var/www/local_dir(本 ...

  3. 树莓派(raspberry)启用root账户 分类: 服务器搭建 Raspberry Pi 2015-04-12 18&colon;45 95人阅读 评论&lpar;0&rpar; 收藏

    树莓派使用的linux是debian系统,所以树莓派启用root和debian是相同的. debian里root账户默认没有密码,但账户锁定. 当需要root权限时,由默认账户经由sudo执行,Ras ...

  4. zedboard--交叉编译Opencv库的生成 分类: shell ubuntu fool&lowbar;tree的笔记本 ZedBoard OpenCV 2014-11-08 18&colon;57 171人阅读 评论&lpar;0&rpar; 收藏

    Opencv的移植,xzyfeixiang和rainysky的博客. 第一步肯定是下载opencv的源码包 第二步已经做好的交叉编译环境. 第三步下载安装cmake   apt-get install ...

  5. ZEDBOARD启动自启配置(加载镜像) 分类: OpenCV ubuntu shell ZedBoard Eye&lowbar;Detection 2014-11-08 18&colon;53 167人阅读 评论&lpar;0&rpar; 收藏

    参考:陆书14.2.8 1)备份ramdisk8M.image.gz 2)加载rootfs镜像文件: 3)在镜像目录下建立自己所需文件夹(挂载目录): 我需要的挂载目录有两个: root/qt/ins ...

  6. 移植opencv库到zedboard(制作运行库镜像) 分类: OpenCV ZedBoard ubuntu shell Eye&lowbar;Detection 2014-11-08 18&colon;48 172人阅读 评论&lpar;0&rpar; 收藏

    主要参考rainysky的博客 http://ledage.eefocus.com/sj229335457/blog/13-06/295352_ad954.html opencv的话只需要将lib这个 ...

  7. PC机安装Qt以及QT交叉编译环境 分类: OpenCV ZedBoard shell ubuntu Eye&lowbar;Detection 2014-11-08 18&colon;57 246人阅读 评论&lpar;0&rpar; 收藏

    PC: apt-get install qtcreator Qt Embedded for ZedBoard: 下载qt-everywhere-opensource-src-4.7.3.tar.gz, ...

  8. 移植QT到ZedBoard(制作运行库镜像) 交叉编译 分类: ubuntu shell ZedBoard OpenCV 2014-11-08 18&colon;49 219人阅读 评论&lpar;0&rpar; 收藏

    制作运行库 由于ubuntu的Qt运行库在/usr/local/Trolltech/Qt-4.7.3/下,由makefile可以看到引用运行库是 INCPATH = -I/usr//mkspecs/d ...

  9. 摄像头参数查看与调节 分类: C&sol;C&plus;&plus; OpenCV 2014-11-08 18&colon;13 138人阅读 评论&lpar;0&rpar; 收藏

    cvGetCaptureProperty 获得视频获取结构的属性 double cvGetCaptureProperty( CvCapture* capture, int property_id ); ...

随机推荐

  1. Vmware虚拟机安装Ubuntu并设置root登陆

    主机操作系统是win7.在Ubuntu官网下好系统镜像.iso文件,安装好Vmware workstation软件 1 安装Ubuntu系统到Vmware虚拟机: 注意下面这步是无法直接设置账号为ro ...

  2. 推荐10个 CSS3 制作的创意下拉菜单效果

    下拉菜单是一个很常见的效果,在网站设计中被广泛使用.通过使用下拉菜单,设计者不仅可以在网站设计中营造出色的视觉吸引力,但也可以为网站提供了一个有效的导航方案.使用 HTML5 和 CSS3 可以更容易 ...

  3. SharePoint Online 创建门户网站系列之图片滚动

    前 言 创建SharePoint Online栏目我们之前已经介绍过了,具体就是内容编辑器方式.自带WebPart方式和JavaScript读取后台数据前台做展示的三种: 但是,对于复杂的展示来说,这 ...

  4. git 上的pull request 是什么意思?

    1.git 上有常见的pull request 功能 2.pull request 的含义 解释一:    有一个仓库,叫Repo A.你如果要往里贡献代码,首先要Fork这个Repo,于是在你的Gi ...

  5. 关于HTML中,绝对定位,相对定位的理解&period;&period;&period;(学习HTML过程中的小记录)

    关于HTML中,绝对定位,相对定位的理解...(学习HTML过程中的小记录)   作者:王可利(Star·星星) HTML中 相对定位:position:relative; 绝对定位:position ...

  6. linux命令——rmdir

    rmdir是常用的命令,该命令的功能是删除空目录,一个目录被删除之前必须是空的.rm - r dir命令可代替rmdir rmdir [选项]... 目录... - p 递归删除目录dirname,当 ...

  7. 入门4:PHP 语法基础1

    一.PHP标记符 1.PHP页面中 以<?php  开头, ?>结尾,纯PHP页面结尾可以不写?> 2.在HTML页面插入PHP代码,必须有?>结尾.代码如下: <!DO ...

  8. 字符串匹配的KMP算法(转)

    字符串匹配是计算机的基本任务之一. 举例来说,有一个字符串"BBC ABCDAB ABCDABCDABDE",我想知道,里面是否包含另一个字符串"ABCDABD&quot ...

  9. C&num;Dictionary集合的使用

    题目:输入一串字符串字母,比如:Welcome to China,比较每个字母出现的次数,不区分大小写. 解决这道题的方法很多.可能一百个人有一百个思路.当时第一眼看到这个题我的思路是:先将接受的一串 ...

  10. C&num; var 隐式类型 var 用法 特点

    var 关键字是C# 3.0 开始,在方法范围中声明的变量: var有以下特点: * 1.var在编译器编译的时候根据初始值推断出其的类型          * 2.不能赋值除了初始值类型之外的其他类 ...