Keepalived日志

时间:2022-12-10 23:34:54

默认日志存放在系统日志:/var/log/messages下

[root@lb01 /]# tail -f  /var/log/messages
Oct :: lb01 Keepalived_vrrp[]: Kernel is reporting: interface eth0 UP
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Transition to MASTER STATE
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Entering MASTER STATE
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) setting protocol VIPs.
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.119.150
Oct :: lb01 Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.119.150 added
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.119.150
Oct :: lb01 dhclient[]: DHCPREQUEST on eth0 to 192.168.119.254 port (xid=0x32903a31)
Oct :: lb01 dhclient[]: DHCPACK from 192.168.119.254 (xid=0x32903a31)
Oct :: lb01 dhclient[]: bound to 192.168.119.128 -- renewal in seconds.

把日志单独存放

修改/etc/sysconfig/keepalived

把KEEPALIVED_OPTIONS="-D" 修改为:KEEPALIVED_OPTIONS="-D -d -S 0"

[root@lb01 /]# vim /etc/sysconfig/keepalived
# Options for keepalived. See `keepalived --help' output and keepalived(8) and
# keepalived.conf() man pages for a list of all options. Here are the most
# common ones :
#
# --vrrp -P Only run with VRRP subsystem.
# --check -C Only run with Health-checker subsystem.
# --dont-release-vrrp -V Dont remove VRRP VIPs & VROUTEs on daemon stop.
# --dont-release-ipvs -I Dont remove IPVS topology on daemon stop.
# --dump-conf -d Dump the configuration data.
# --log-detail -D Detailed log messages.
# --log-facility -S - Set local syslog facility (default=LOG_DAEMON)
# KEEPALIVED_OPTIONS="-D -d -S 0"

在/etc/rsyslog.conf 末尾添加

[root@lb01 /]# vim /etc/rsyslog.conf
local0.* /var/log/keepalived.log

重启日志记录服务

[root@lb01 /]# /etc/init.d/rsyslog restart
Shutting down system logger: [ OK ]
Starting system logger: [ OK ]

重启keepalived

[root@lb01 /]# /etc/init.d/keepalived restart
Stopping keepalived: [ OK ]
Starting keepalived: [ OK ]

查看日志

[root@lb01 /]# tail -f /var/log/keepalived.log
Oct :: lb01 Keepalived_healthcheckers[]: Using autogen SSL context
Oct :: lb01 Keepalived_healthcheckers[]: Using LinkWatch kernel netlink reflector...
Oct :: lb01 Keepalived_vrrp[]: VRRP sockpool: [ifindex(), proto(), unicast(), fd(,)]
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Transition to MASTER STATE
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Received lower prio advert, forcing new election
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Entering MASTER STATE
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) setting protocol VIPs.
Oct :: lb01 Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.119.150 added
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.119.150
Oct :: lb01 Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.119.150

Keepalived日志的更多相关文章

  1. keepalived日志显示脚本能执行成功,但是amoeba程序没启动起来,单独执行脚本amoeba能启动成功,放到keepalived里面启动不起来

    keepalived日志如图: 解决:keepalived还有crontab等计划任务自动执行脚本,并不会有本地用户的环境变量,需要在脚本里面加 . /etc/profile  引入本地用户的环境变量

  2. Centos7 keepalived 修改日志路径

    Keepalived默认所有的日志都是写入到/var/log/message下的,由于message的日志太多了,而Keepalived的日志又很难分离出来,所以本文提供了一个调整Keepalived ...

  3. Net分布式系统之三:Keepalived+LVS+Nginx负载均衡之高可用

    上一篇写了nginx负载均衡,此篇实现高可用(HA).系统整体设计是采用Nginx做负载均衡,若出现Nginx单机故障,则导致整个系统无法正常运行.针对系统架构设计的高可用要求,我们需要解决Nginx ...

  4. keepalived+LVS 实现双机热备、负载均衡、失效转移 高性能 高可用 高伸缩性 服务器集群

    本章笔者亲自动手,使用LVS技术实现实现一个可以支持庞大访问量.高可用性.高伸缩性的服务器集群 在读本章之前,可能有不少读者尚未使用该技术,或者部分读者使用Nginx实现应用层的负载均衡.这里大家都可 ...

  5. 通过Keepalived实现Redis Failover自动故障切换功能

    通过Keepalived实现Redis Failover自动故障切换功能[实践分享] 参考资料: http://patrick-tang.blogspot.com/2012/06/redis-keep ...

  6. redis+Keepalived实现Redis主从复制

    redis+Keepalived实现Redis主从复制: 环境:CentOs6.5Master: 10.10.10.203Slave:   10.10.10.204Virtural IP Addres ...

  7. 为什么很多人用keepalived来实现redis故障转移

    目前,Redis还没有一个类似于MySQL Proxy或Oracle RAC的官方HA方案.Redis作者有一个名为Redis Sentinel的计划 ,据称将会有监控,报警和自动故障转移三大功能,非 ...

  8. CentOS下安装keepalived 进行服务器热备

    一.准备: 1.1 安装依赖软件 如果系统为基本文本安装,需要安装一下软件  yum -y install ipvsadm yum -y install kernel kernel-devel reb ...

  9. Keepalived+LVS+Nginx负载均衡之高可用

    Keepalived+LVS+Nginx负载均衡之高可用 上一篇写了nginx负载均衡,此篇实现高可用(HA).系统整体设计是采用Nginx做负载均衡,若出现Nginx单机故障,则导致整个系统无法正常 ...

随机推荐

  1. 旧文—冬日感怀

    冬日感怀   下雪了,虽不大,可那雪花落在手上,融在心里,便泛起淡淡的温柔,因为这是冬日的馈赠啊,是上苍的礼物,是往昔记忆的灰烬化作天地间的精灵装点纷繁琐碎的世界.于是,透过汽车上雾气氤氲的玻璃窗,人 ...

  2. sequenza细胞纯度计算

    安装sequenza bam文件要放在前面,否侧会-f命令可能识别错误 samtools mpileup a.bam -f hg19.fasta -Q 20 |gzip > normal.pil ...

  3. [itint5]根据前序后序遍历统计二叉树

    http://www.itint5.com/oj/#28 这题有意思.一开始还想不清楚,看了解释,很棒. 这个题目的特殊之处是所有节点的值都是不一样的. 所以递归过程可以大大简化. 先看两种遍历的性质 ...

  4. Unique Binary Search Trees In JAVA

    Given n, how many structurally unique BST's (binary search trees) that store values 1...n? For examp ...

  5. LeetCode 476. Number Complement

    Given a positive integer, output its complement number. The complement strategy is to flip the bits ...

  6. 控制台调用天气API例子

    第一步,新建控制台应用程序,然后新建类:WeatherReport: using System; using System.Collections.Generic; using System.Linq ...

  7. python两个 list 获取交集,并集,差集的方法

    1. 获取两个list 的交集 #方法一: a=[2,3,4,5] b=[2,5,8] tmp = [val for val in a if val in b] print tmp #[2, 5] # ...

  8. lucene修改索引——(六)

    原理: 修改的原理是先删除,后增加一个,这也是常用的一种修改的方式. 删除的文档的id不会被新增加的文档占用,类似于mysql的自增,当删除一个id=2时,以后id=2就是空着的,不会上来一个把2给占 ...

  9. 使用overflow:hidden之后使的同行元素不对齐

    一个父元素(块级元素)中有几个在同一水平线上的几个元素(行内块元素),设置其中某个元素的oveflow:hidden之后,会导致这几个行内元素不再是同一水平线上对齐 原因是: 1)行内元素的默认ver ...

  10. POJ1995:Raising Modulo Numbers(快速幂取余)

    题目:http://poj.org/problem?id=1995 题目解析:求(A1B1+A2B2+ ... +AHBH)mod M. 大水题. #include <iostream> ...