centos7.6安装python3.6.9+elastalert .编译安装python3..9环境
# 安装依赖
yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel
# 获取编译安装python3.6.9
mkdir -p /usr/local/python3
wget https://www.python.org/ftp/python/3.6.9/Python-3.6.9.tgz
tar xf Python-3.6..tgz
cd Python-3.6.
./configure --prefix=/usr/local/python3
make && make install
ln -s /usr/local/python3/bin/python-3.6.9/bin/python3.6 /usr/bin/python3
ln -s /usr/local/python3/bin/pip3 /usr/bin/pip3 .安装virtualenv虚拟环境
pip3 install virtualenv
# 创建存放虚拟环境的目录
mkdir -p /usr/local/venv_py3.6_elastalert-0.2. # 创建纯净的虚拟环境
cd /usr/local
git clone https://github.com/Yelp/elastalert.git
cd /usr/local/elastalert /usr/local/python-3.6./bin/virtualenv --no-site-packages --python=/usr/local/python-3.6./bin/python3. /usr/local/venv_py3.6_elastalert-0.2.
[root@eus-kibana-elastalert-:/usr/local/venv_py3.6_elastalert-0.2.]# source bin/activate
(venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/venv_py3.6_elastalert-0.2.]# .在虚拟的python3.6环境中安装alasticalert
# 指定库，安装依赖，否则可能安装失败 (venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/elastalert]# pip install -r requirements.txt -i https://pypi.python.org/simple # 安装主程序，否则无法使用 elastalert-create-index 命令
(venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/elastalert]# python setup.py install # 运行 elastalert-create-index 配置
(venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/elastalert]# elastalert-create-index
Enter Elasticsearch host: 172.30.0.62
Enter Elasticsearch port:
Use SSL? t/f: f
Enter optional basic-auth username (or leave blank):
Enter optional basic-auth password (or leave blank):
Enter optional Elasticsearch URL prefix (prepends a string to the URL of every request):
New index name? (Default elastalert_status)
New alias name? (Default elastalert_alerts)
Name of existing index to copy? (Default None)
Elastic Version: 7.3.
Reading Elastic index mappings:
Reading index mapping 'es_mappings/6/silence.json'
Reading index mapping 'es_mappings/6/elastalert_status.json'
Reading index mapping 'es_mappings/6/elastalert.json'
Reading index mapping 'es_mappings/6/past_elastalert.json'
Reading index mapping 'es_mappings/6/elastalert_error.json'
New index elastalert_status created
Done!
(venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/elastalert]# # 报错
(venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/elastalert]# elastalert-test-rule example_rules/my_rule.yml File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/tzlocal/unix.py", line , in _get_localzone
utils.assert_tz_offset(tz)
File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/tzlocal/utils.py", line , in assert_tz_offset
raise ValueError(msg)
ValueError: Timezone offset does not match system offset: != -. Please, check your config files. # 代码和系统时区不匹配，重新设置为上海时区
(venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/elastalert]# timedatectl set-timezone Asia/Shanghai
(venv_py3.6_elastalert-0.2.) [root@eus-kibana-elastalert-:/usr/local/elastalert]# elastalert-test-rule example_rules/my_rule.yml
INFO:elastalert:Note: In debug mode, alerts will be logged to console but NOT actually sent.
To send them but remain verbose, use --verbose instead.
WARNING:elasticsearch:GET http://172.30.0.62:19200/logstash-*/_search?ignore_unavailable=true&size=1 [status:400 request:0.004s]
Error running your filter:
RequestError(, 'parsing_exception', {'error': {'root_cause': [{'type': 'parsing_exception', 'reason': '[term] query malformed, no start_object after query name', 'line': , 'col': }], 'type': 'parsing_exception', 'reason': '[term] query malformed, no start_object after query name', 'line': , 'col': }, 'status': })
INFO:elastalert:Note: In debug mode, alerts will be logged to console but NOT actually sent.
To send them but remain verbose, use --verbose instead.
rules loaded
INFO:apscheduler.scheduler:Adding job tentatively -- it will be properly scheduled when the scheduler starts
WARNING:elasticsearch:GET http://172.30.0.62:19200/logstash-*/_search?_source_includes=%2A%2C%40timestamp&ignore_unavailable=true&scroll=30s&size=10000 [status:400 request:0.003s]
ERROR:root:Error running query: RequestError(, 'parsing_exception', '[term] query malformed, no start_object after query name') Would have written the following documents to writeback index (default is elastalert_status): elastalert_error - {'message': "Error running query: RequestError(400, 'parsing_exception', '[term] query malformed, no start_object after query name')", 'traceback': ['Traceback (most recent call last):', ' File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/elastalert-0.2.1-py3.6.egg/elastalert/elastalert.py", line 384, in get_hits', ' **extra_args', ' File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/elasticsearch/client/utils.py", line 84, in _wrapped', ' return func(*args, params=params, **kwargs)', ' File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/elasticsearch/client/__init__.py", line 819, in search', ' "GET", _make_path(index, "_search"), params=params, body=body', ' File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/elasticsearch/transport.py", line 350, in perform_request', ' timeout=timeout,', ' File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/elasticsearch/connection/http_requests.py", line 156, in perform_request', ' self._raise_error(response.status_code, raw_data)', ' File "/usr/local/venv_py3.6_elastalert-0.2.1/lib/python3.6/site-packages/elasticsearch/connection/base.py", line 181, in _raise_error', ' status_code, error_message, additional_info', "elasticsearch.exceptions.RequestError: RequestError(400, 'parsing_exception', '[term] query malformed, no start_object after query name')"], 'data': {'rule': 'eus-log-elasticsearch-cluster-alert', 'query': {'query': {'bool': {'filter': {'bool': {'must': [{'range': {'@timestamp': {'gt': '2019-09-17T05:06:25.831477Z', 'lte': '2019-09-17T05:21:25.831477Z'}}}, {'term': None}, {'query_string': {'query': 'message: error'}}]}}}}, 'sort': [{'@timestamp': {'order': 'asc'}}]}}} .配置elastalert
##############全局配置
[root:/usr/local/elastalert#cp config.yaml.example config.yaml
#存放elastalert 规则的文件夹，你的elastalert 放到哪里就放到哪里就行了
rules_folder: /usr/local/elastalert/example_rules #Elastalert 多久去查询一下根据定义的规则去elasticsearch 查询是否有符合规则的字段，如果有就会触发报警，如果没有就等待下一次时间再检查，时间定义的单位从周到秒都可以，具体定义方法如下。
run_every:
#seconds：
minutes:
#hours：
#days：
#weeks： #当查询开始一直到结束，最大的缓存时间。
buffer_time:
minutes: #你的Elasticsearch ip地址
es_host: 172.30.0.52 #Elasticsearch 的端口
es_port: #这个是elastalert 在es里边写的index
# The index on es_host which is used for metadata storage
# This can be a unmapped index, but it is recommended that you run
# elastalert-create-index to set a mapping
writeback_index: elastalert_status #如果alert当时没有发出去重试多久之后放弃发送；
alert_time_limit:
days: [root@eus-kibana-elastalert-:/usr/local/elastalert]# egrep -v '^#|^$' config.yaml
rules_folder: example_rules
run_every:
minutes:
buffer_time:
minutes:
es_host: 172.30.0.62
es_port:
writeback_index: elastalert_status
writeback_alias: elastalert_alerts
alert_time_limit:
days: ##############rules 的定义
[root@ws-elk-cluster01:/usr/local/elastalert]#cp example_frequency.yaml my_rule.yaml
vi my_rule.yaml
# Alert when the rate of events exceeds a threshold
#Elasticsearch 机器
es_host: 192.168.115.65 #Elasticsearch 端口
es_port: #如果elasticsearch 有认证，填写用户名和密码的地方
# (Optional) basic-auth username and password for Elasticsearch
#es_username: someusername
#es_password: somepassword #rule name 必须是独一的，不然会报错，这个定义完成之后，会成为报警邮件的标题
# (Required)
# Rule name, must be unique
name: ws-elk-cluster-alert #配置一种数据验证的方式，有 any，blacklist，whitelist，change，frequency，spike，flatline，new_term，cardinality
any：只要有匹配就报警；
blacklist：compare_key字段的内容匹配上 blacklist数组里任意内容；
whitelist：compare_key字段的内容一个都没能匹配上whitelist数组里内容；
change：在相同query_key条件下，compare_key字段的内容，在 timeframe范围内 发送变化；
frequency：在相同 query_key条件下，timeframe 范围内有num_events个被过滤出 来的异常；
spike：在相同query_key条件下，前后两个timeframe范围内数据量相差比例超过spike_height。其中可以通过spike_type设置具体涨跌方向是- up,down,both 。还可以通过threshold_ref设置要求上一个周期数据量的下限，threshold_cur设置要求当前周期数据量的下限，如果数据量不到下限，也不触发；
flatline：timeframe 范围内，数据量小于threshold 阈值；
new_term：fields字段新出现之前terms_window_size(默认30天)范围内最多的terms_size (默认50)个结果以外的数据；
cardinality：在相同 query_key条件下，timeframe范围内cardinality_field的值超过 max_cardinality 或者低于min_cardinality # (Required)
# Type of alert.
# the frequency rule type alerts when num_events events occur with timeframe time
#我配置的是frequency，这个需要两个条件满足，在相同 query_key条件下，timeframe 范围内有num_events个被过滤出来的异常
type: frequency #这个index 是指再kibana 里边的index，支持正则匹配，支持多个index，同时如果嫌麻烦直接* 也可以。
index: customer*
#index: es-nginx*,winlogbeat* #时间出发的次数
num_events: #和上边的参数关联，也就是说在4分钟内出发5次会报警
timeframe:
minutes: #这个还是非常关键的地方，就是你希望程序的message里边出现了什么样的关键字就报警，这个其实就是elasticsearch 的query语句，支持 AND&OR等。
filter:
- query:
query_string:
query: "message: 错误 OR Error" #一但需要报警用那种方式报警，支持如下的方式，同时官方支持自定义，我用常规的邮件方式作为报警方式。
alert:
- "email"
#在邮件正文会显示你定义的alert_text
alert_text: "Ref Log http://192.168.254.194"
#报警邮箱的smtp server
smtp_host: mail.chinasoft.cn
#报警邮箱的smtp 端口
smtp_port:
#需要把认证信息写到额外配置文件里，需要user和password两个属性
smtp_auth_file: /usr/local/elastalert/example_rules/smtp_auth_file.yaml
email_reply_to:jack@.com
from_addr: jack@.com #接受报警邮箱的地址,可以写多个，当然后边搞个邮件组最好了。
# (required, email specific)
# a list of email addresses to send alerts to
email:
- "jack@163.com" [root@eus-kibana-elastalert-:/usr/local/elastalert/example_rules]# egrep -v '^#|^$' my_rule.yml
es_host: 172.30.0.62
es_port:
name: eus-log-elasticsearch-cluster-alert
type: frequency
index: filebeats-log*
num_events:
timeframe:
hours:
filter:
- term:
- query:
query_string:
query: "message: error"
alert:
- "email"
email:
- "jack@chinasoft.cn"
alert_text: "Ref Log http://172.30.0.62"
smtp_host: mail.chinasoft.cn
smtp_port:
smtp_auth_file: /usr/local/elastalert/example_rules/smtp_auth_file.yaml
email_reply_to: jack@chinasoft.cn
from_addr: jack@chinasoft.cn ######################smtp认证文件
[root@ws-elk-cluster01:/usr/local/elastalert]#vi smtp_auth_file.yaml
user: "jack"
password: "jack123" #通过elastalert-test-rule 测试一下我们写的rule 是否有问题
[root@ws-elk-cluster01:/usr/local/elastalert/example_rules]# elastalert-test-rule my_rule.yaml #配置检查成功之后，我们就可以把程序跑起来了，把所有的日志直接打在前端，这样方便验证
/usr/local/venv_py3.6_elastalert-0.2./bin/python3. -m elastalert.elastalert --verbose --rule /usr/local/elastalert/example_rules/my_rule.yaml