(如果有主键的话,这个题目又该如何做呢)
19 个解决方案
#1
--按某一字段分组取最大(小)值所在行的数据
(爱新觉罗.毓华 2007-10-23于浙江杭州)
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/
--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/
--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/
--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/
--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/
--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select * , px = identity(int,1,1) into tmp from tb
select m.name,m.val,m.memo from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)
drop table tb,tmp
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select m.name,m.val,m.memo from
(
select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)
drop table tb
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
#2
--如何按字段删除重复记录
一张表里面以两个字段为唯一字段,当几条记录的这两个字段完全相同时,需要删除重复项,如下表
a b c d
1 2 3 4
1 5 3 5
1 2 7 9
以a、b为唯一字段,第一条和第三条的a、b完全相同,所以,需要删除第一条记录1 2 3 4 或者第三条记录1 2 7 9
即如下结果:
a b c d
1 2 3 4
1 5 3 5
或
a b c d
1 5 3 5
1 2 7 9
请问各位大侠这种sql语句怎么写
CREATE TABLE Tb1(id int, [a] varchar(255), [b] varchar(255), [c] varchar(255), [d] varchar(255))
INSERT Tb1(id, [a], [b], [c], [d])
SELECT 1, '1','2','3','4'
UNION ALL SELECT 2, '1','5','3','5'
UNION ALL SELECT 3, '1','2','7','9'
UNION ALL SELECT 4, '1','4','7','6'
delete Tb1 where [id] not in (select max([id]) from Tb1 group by a,b )
select * from tb1
drop table tb1
如果要同时删除第一和第三行
即如下结果:
a b c d
1 5 3 5
语句如下:
delete m from tb t
inner join
(
select a ,b
from tb
group by a , b
having count(*)>1
)n
on m.a = n.a and m.b = n.b
或
delete * from tb as m,
(
select a ,b
from tb
group by a , b
having count(*)>1
)n
where m.a = n.a and m.b = n.b
------------------------------------------------------------------------------------
在几千条记录里,存在着些相同的记录,如何能用SQL语句,删除掉重复的呢?谢谢!
1、查找表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断
select * from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
delete from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowid not in (select min(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
delete from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
比方说在A表中存在一个字段“name”,而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*) From A Group By Name Having Count(*) > 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*) From A Group By Name,sex Having Count(*) > 1
------------------------------------------------------------------------------------------------
declare @max integer,@id integer
declare cur_rows cursor local for select 主字段,count(*) from 表名 group by 主字段 having count(*) >; 1
open cur_rows
fetch cur_rows into @id,@max
while @@fetch_status=0
begin
select @max = @max -1
set rowcount @max
delete from 表名 where 主字段 = @id
fetch cur_rows into @id,@max
end
close cur_rows
set rowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
select distinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
select identity(int,1,1) as autoID, * into #Tmp from tableName
select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID
select * from #Tmp where autoID in(select autoID from #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
select * from tablename where id in (
select id from tablename
group by id
having count(id) > 1)
#3
处理表重复记录(查询和删除)
http://topic.csdn.net/u/20080626/00/43d0d10c-28f1-418d-a05b-663880da278a.html
http://topic.csdn.net/u/20080626/00/43d0d10c-28f1-418d-a05b-663880da278a.html
#4
没主键借用临时表生成一个无重复的id列.
有主键的话,就不用生成无重复的id列了.
有主键的话,就不用生成无重复的id列了.
#5
没主键:05用CTE,直接刪就行,2000時參照以上方法
有主键時參照以上方法
有主键時參照以上方法
#6
关键是得要标识这完全相同的两行,如果没有办法标识的时候只能借用临时表了。
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
#7
容易理解的:
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
#8
select distinct * into #t from tablename
truncate table tablename
select * into tablename from #t
#9
http://blog.csdn.net/lff642/archive/2008/05/22/2468646.aspx
参考
参考
#10
已经罗列得十分清楚了...
#11
#12
穷举字段相等,或者GROUP BY 所有字段
#13
select distinct * into #t from tablename
truncate table tablename
select * into tablename from #t
#14
这种最简单
#15
踩踩............
#16
select distinct * into #tmp from 表
delete from 表
insert into 表 select * from #tmp
delete from 表
insert into 表 select * from #tmp
#17
无主健,记录完全相同,sql无法区分记录。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
#18
无主健,记录完全相同,sql无法区分记录。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
#19
mark.
#20
#1
--按某一字段分组取最大(小)值所在行的数据
(爱新觉罗.毓华 2007-10-23于浙江杭州)
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/
--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/
--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/
--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/
--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/
--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select * , px = identity(int,1,1) into tmp from tb
select m.name,m.val,m.memo from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)
drop table tb,tmp
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go
select m.name,m.val,m.memo from
(
select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)
drop table tb
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
(2 行受影响)
*/
#2
--如何按字段删除重复记录
一张表里面以两个字段为唯一字段,当几条记录的这两个字段完全相同时,需要删除重复项,如下表
a b c d
1 2 3 4
1 5 3 5
1 2 7 9
以a、b为唯一字段,第一条和第三条的a、b完全相同,所以,需要删除第一条记录1 2 3 4 或者第三条记录1 2 7 9
即如下结果:
a b c d
1 2 3 4
1 5 3 5
或
a b c d
1 5 3 5
1 2 7 9
请问各位大侠这种sql语句怎么写
CREATE TABLE Tb1(id int, [a] varchar(255), [b] varchar(255), [c] varchar(255), [d] varchar(255))
INSERT Tb1(id, [a], [b], [c], [d])
SELECT 1, '1','2','3','4'
UNION ALL SELECT 2, '1','5','3','5'
UNION ALL SELECT 3, '1','2','7','9'
UNION ALL SELECT 4, '1','4','7','6'
delete Tb1 where [id] not in (select max([id]) from Tb1 group by a,b )
select * from tb1
drop table tb1
如果要同时删除第一和第三行
即如下结果:
a b c d
1 5 3 5
语句如下:
delete m from tb t
inner join
(
select a ,b
from tb
group by a , b
having count(*)>1
)n
on m.a = n.a and m.b = n.b
或
delete * from tb as m,
(
select a ,b
from tb
group by a , b
having count(*)>1
)n
where m.a = n.a and m.b = n.b
------------------------------------------------------------------------------------
在几千条记录里,存在着些相同的记录,如何能用SQL语句,删除掉重复的呢?谢谢!
1、查找表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断
select * from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
2、删除表中多余的重复记录,重复记录是根据单个字段(peopleId)来判断,只留有rowid最小的记录
delete from people
where peopleId in (select peopleId from people group by peopleId having count(peopleId) > 1)
and rowid not in (select min(rowid) from people group by peopleId having count(peopleId )>1)
3、查找表中多余的重复记录(多个字段)
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
4、删除表中多余的重复记录(多个字段),只留有rowid最小的记录
delete from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
5、查找表中多余的重复记录(多个字段),不包含rowid最小的记录
select * from vitae a
where (a.peopleId,a.seq) in (select peopleId,seq from vitae group by peopleId,seq having count(*) > 1)
and rowid not in (select min(rowid) from vitae group by peopleId,seq having count(*)>1)
比方说在A表中存在一个字段“name”,而且不同记录之间的“name”值有可能会相同,
现在就是需要查询出在该表中的各记录之间,“name”值存在重复的项;
Select Name,Count(*) From A Group By Name Having Count(*) > 1
如果还查性别也相同大则如下:
Select Name,sex,Count(*) From A Group By Name,sex Having Count(*) > 1
------------------------------------------------------------------------------------------------
declare @max integer,@id integer
declare cur_rows cursor local for select 主字段,count(*) from 表名 group by 主字段 having count(*) >; 1
open cur_rows
fetch cur_rows into @id,@max
while @@fetch_status=0
begin
select @max = @max -1
set rowcount @max
delete from 表名 where 主字段 = @id
fetch cur_rows into @id,@max
end
close cur_rows
set rowcount 0
方法二
有两个意义上的重复记录,一是完全重复的记录,也即所有字段均重复的记录,二是部分关键字段重复的记录,比如Name字段重复,而其他字段不一定重复或都重复可以忽略。
1、对于第一种重复,比较容易解决,使用
select distinct * from tableName
就可以得到无重复记录的结果集。
如果该表需要删除重复的记录(重复记录保留1条),可以按以下方法删除
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
发生这种重复的原因是表设计不周产生的,增加唯一索引列即可解决。
2、这类重复问题通常要求保留重复记录中的第一条记录,操作方法如下
假设有重复的字段为Name,Address,要求得到这两个字段唯一的结果集
select identity(int,1,1) as autoID, * into #Tmp from tableName
select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID
select * from #Tmp where autoID in(select autoID from #tmp2)
最后一个select即得到了Name,Address不重复的结果集(但多了一个autoID字段,实际写时可以写在select子句中省去此列)
select * from tablename where id in (
select id from tablename
group by id
having count(id) > 1)
#3
处理表重复记录(查询和删除)
http://topic.csdn.net/u/20080626/00/43d0d10c-28f1-418d-a05b-663880da278a.html
http://topic.csdn.net/u/20080626/00/43d0d10c-28f1-418d-a05b-663880da278a.html
#4
没主键借用临时表生成一个无重复的id列.
有主键的话,就不用生成无重复的id列了.
有主键的话,就不用生成无重复的id列了.
#5
没主键:05用CTE,直接刪就行,2000時參照以上方法
有主键時參照以上方法
有主键時參照以上方法
#6
关键是得要标识这完全相同的两行,如果没有办法标识的时候只能借用临时表了。
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
#7
容易理解的:
select distinct * into #Tmp from tableName
drop table tableName
select * into tableName from #Tmp
drop table #Tmp
#8
select distinct * into #t from tablename
truncate table tablename
select * into tablename from #t
#9
http://blog.csdn.net/lff642/archive/2008/05/22/2468646.aspx
参考
参考
#10
已经罗列得十分清楚了...
#11
#12
穷举字段相等,或者GROUP BY 所有字段
#13
select distinct * into #t from tablename
truncate table tablename
select * into tablename from #t
#14
这种最简单
#15
踩踩............
#16
select distinct * into #tmp from 表
delete from 表
insert into 表 select * from #tmp
delete from 表
insert into 表 select * from #tmp
#17
无主健,记录完全相同,sql无法区分记录。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
#18
无主健,记录完全相同,sql无法区分记录。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
借助临时表,indentity列,或uniqueidentifier列,插入源数据,删除其中一条,清原表,再将数据写回去。
或者,用group by或distinc插入临时表,再清原表,再写回。
#19
mark.