Fedora 22中的Locale and Keyboard Configuration

时间:2022-09-15 12:44:54

Introduction

  The system locale specifies the language settings of system services and user interfaces. The keyboard layout settings control the layout used on the text console and graphical user interfaces.

  These settings can be made by modifying the /etc/locale.conf configuration file or by using the localectl utility. Also, you can use the graphical user interface to perform the task; for a description of this method, see Fedora Installation Guide.

1. Setting the System Locale

  System-wide locale settings are stored in the /etc/locale.conf file, which is read at early boot by the systemd daemon. The locale settings configured in /etc/locale.conf are inherited by every service or user, unless individual programs or individual users override them.

  The basic file format of /etc/locale.conf is a newline-separated list of variable assignments. For example, German locale with English messages in /etc/locale.conf looks as follows:

LANG=de_DE.UTF-8
LC_MESSAGES=C

  Here, the LC_MESSAGES option determines the locale used for diagnostic messages written to the standard error output. To further specify locale settings in /etc/locale.conf, you can use several other options, the most relevant are summarized in Table 1, “Options configurable in /etc/locale.conf”. See the locale(7) manual page for detailed information on these options. Note that the LC_ALL option, which represents all possible options, should not be configured in /etc/locale.conf.

  Table 1. Options configurable in /etc/locale.conf

Option Description
LANG Provides a default value for the system locale.
LC_COLLATE Changes the behavior of functions which compare strings in the local alphabet.
LC_CTYPE Changes the behavior of the character handling and classification functions and the multibyte character functions.
LC_NUMERIC Describes the way numbers are usually printed, with details such as decimal point versus decimal comma.
LC_TIME Changes the display of the current time, 24-hour versus 12-hour clock.
LC_MESSAGES Determines the locale used for diagnostic messages written to the standard error output.

1.1. Displaying the Current Status

  The localectl command can be used to query and change the system locale and keyboard layout settings. To show the current settings, use the status option:

localectl status

  Example 1. Displaying the Current Status

  The output of the previous command lists the currently set locale, keyboard layout configured for the console and for the X11 window system.

~]$ localectl status
   System Locale: LANG=en_US.UTF-8
       VC Keymap: us
      X11 Layout: n/a

1.2. Listing Available Locales

  To list all locales available for your system, type:

localectl list-locales

  Example 2. Listing Locales

  Imagine you want to select a specific English locale, but you are not sure if it is available on the system. You can check that by listing all English locales with the following command:

~]$ localectl list-locales | grep en_
en_AG
en_AG.utf8
en_AU
en_AU.iso88591
en_AU.utf8
en_BW
en_BW.iso88591
en_BW.utf8

output truncated

1.3. Setting the Locale

  To set the default system locale, use the following command as root:

localectl set-locale LANG=locale

  Replace locale with the locale name, found with the localectl list-locales command. The above syntax can also be used to configure parameters from Table 1, “Options configurable in /etc/locale.conf”.

  Example 3. Changing the Default Locale

  For example, if you want to set British English as your default locale, first find the name of this locale by using list-locales. Then, as root, type the command in the following form:

~]# localectl set-locale LANG=en_GB.utf8

2. Changing the Keyboard Layout

  The keyboard layout settings enable the user to control the layout used on the text console and graphical user interfaces.

2.1. Displaying the Current Settings

  As mentioned before, you can check your current keyboard layout configuration with the following command:

localectl status

  Example 4. Displaying the Keyboard Settings

  In the following output, you can see the keyboard layout configured for the virtual console and for the X11 window system.

~]$ localectl status
   System Locale: LANG=en_US.utf8
       VC Keymap: us
      X11 Layout: us

2.2. Listing Available Keymaps

  To list all available keyboard layouts that can be configured on your system, type:

localectl list-keymaps

  Example 5. Searching for a Particular Keymap

  You can use grep to search the output of the previous command for a specific keymap name. There are often multiple keymaps compatible with your currently set locale. For example, to find available Czech keyboard layouts, type:

~]$ localectl list-keymaps | grep cz
cz
cz-cp1250
cz-lat2
cz-lat2-prog
cz-qwerty
cz-us-qwertz
sunt5-cz-us
sunt5-us-cz

2.3. Setting the Keymap

  To set the default keyboard layout for your system, use the following command as root:

localectl set-keymap map

  Replace map with the name of the keymap taken from the output of the localectl list-keymaps command. Unless the --no-convert option is passed, the selected setting is also applied to the default keyboard mapping of the X11 window system, after converting it to the closest matching X11 keyboard mapping. This also applies in reverse, you can specify both keymaps with the following command as root:

localectl set-x11-keymap map

  If you want your X11 layout to differ from the console layout, use the --no-convert option.

localectl --no-convert set-x11-keymap map

  With this option, the X11 keymap is specified without changing the previous console layout setting.

  Example 6. Setting the X11 Keymap Separately

  Imagine you want to use German keyboard layout in the graphical interface, but for console operations you want to retain the US keymap. To do so, type as root:

~]# localectl --no-convert set-x11-keymap de

  Then you can verify if your setting was successful by checking the current status:

~]$ localectl status
   System Locale: LANG=de_DE.UTF-8
       VC Keymap: us
      X11 Layout: de

  Apart from keyboard layout (map), three other options can be specified:

localectl set-x11-keymap map model variant options

  Replace model with the keyboard model name, variant and options with keyboard variant and option components, which can be used to enhance the keyboard behavior. These options are not set by default. For more information on X11 Model, X11 Variant, and X11 Options see the kbd(4) man page.

3. Additional Resources

  For more information on how to configure the keyboard layout on Fedora, see the resources listed below:

  Installed Documentation

  • localectl(1) — The manual page for the localectl command line utility documents how to use this tool to configure the system locale and keyboard layout.
  • loadkeys(1) — The manual page for the loadkeys command provides more information on how to use this tool to change the keyboard layout in a virtual console.

Fedora 22中的Locale and Keyboard Configuration的更多相关文章

  1. Fedora 22中的日期和时间配置

    Introduction Modern operating systems distinguish between the following two types of clocks: A real- ...

  2. Fedora 22中的用户和用户组管理

    The control of users and groups is a core element of Fedora system administration. This chapter expl ...

  3. Fedora 22中的RPM软件包管理工具

    Introduction The RPM Package Manager (RPM) is an open packaging system that runs on Fedora as well a ...

  4. Fedora 22中的Services and Daemons

    Introduction Maintaining security on your system is extremely important, and one approach for this t ...

  5. Fedora 22中的DNF软件包管理工具

    Introduction DNF is the The Fedora Project package manager that is able to query for information abo ...

  6. 在Fedora 22下安装配置RealVNC Server 5.2.3的经验总结

    RealVNC是目前功能最全.性能最好的VNC商业软件套件,很多时候为了确保性能和功能的统一,还是大量地在使用RealVNC.最近在Fedora 22工作站上安装RealVNC Server 5.2. ...

  7. 在同一个硬盘上安装多个 Linux 发行版及 Fedora 21 、Fedora 22 初体验

    在同一个硬盘上安装多个 Linux 发行版 以前对多个 Linux 发行版的折腾主要是在虚拟机上完成.我的桌面电脑性能比较强大,玩玩虚拟机没啥问题,但是笔记本电脑就不行了.要在我的笔记本电脑上折腾多个 ...

  8. 如何在Fedora 22上面配置Apache的Docker容器

    在这篇文章中,我们将会学习关于Docker的一些知识,如何使用Docker部署Apache httpd服务,并且共享到Docker Hub上面去.首先,我们学习怎样拉取和使用Docker Hub里面的 ...

  9. fedora 23中配置nfs-server

    fedora 23中配置nfs-server */--> fedora 23中配置nfs-server Table of Contents 1. 产考资料 2. NFS配置文件 2.1. /et ...

随机推荐

  1. 什么?你还不会写JQuery 插件

    前言 如今做web开发,jquery 几乎是必不可少的,就连vs神器在2010版本开始将Jquery 及ui 内置web项目里了.至于使用jquery好处这里就不再赘述了,用过的都知道.今天我们来讨论 ...

  2. JavaScript encodeURI(), decodeURI(), encodeURIComponent(), decodeURIComponent()

    URI:  Uniform Resource Identifier encodeURI() And decodeURI() The encodeURI() function is used to en ...

  3. CAT XQX ---- 增删改查架构说明 1

    View 层  --  以国家为例 1. 显示 数据库的 table 页面效果 对应代码: <table id="dg" title="国家信息" cla ...

  4. Bootstrap 教程

    Bootstrap,来自 Twitter,是基于 HTML.CSS.JAVASCRIPT 的简介灵活的流行前段框架及交互组件集. 内容列表 Bootstrap 教程 Bootstrap 教程 Boot ...

  5. mysql表的创建和删除

    在创建数据库表时,最好是在编辑器中写好创建表的代码,然后粘贴到命令行中,这样如果有错修改起来方便. 现在来创建一个user表: -- 打开数据库, --后面必须要有空格, 表示注释 USE mydb3 ...

  6. geoserver集成以及部署arcgis server瓦片数据

    关注重点: 一般来说,geoserver是不支持arcgis server格式瓦片数据部署的,至少我本机的geoserver版本(2.8.5)以及之前的版本并没有集成进来,不知道目前官网的最新版是否支 ...

  7. MySQL存储过程(PROCEDURE)(二)

    一.存储过程的修改: 语法:  ALTER {PROCEDURE | FUNCTION} sp_name [characteristic……]  参数解释: Sp_name:表示存储过程或函数的名称 ...

  8. MyBatis全局配置文件MyBatis-config&period;xml代码

    <?xml version="1.0" encoding="UTF-8" ?> <!DOCTYPE configuration PUBLIC ...

  9. 搭建http静态网页服务器出现&OpenCurlyDoubleQuote;Forbidden You don&&num;39&semi;t have permission to access &sol; on this server”

    部分参考链接: 2.4+ httpd最简单example.conf, 存放目录:/etc/httpd/conf.d/example.conf Alias /newstart-zte/ "/n ...

  10. 使用ApiPost测试接口时需要先登录的接口怎么办(基于Cookie)?

    在后台在开发.调试接口时,常常会遇到需要登陆才能请求的接口. 比如:获取登陆用户的收藏列表,此时,我们就需要模拟登陆状态进行接口调试了.如图: 今天,我们讲解利用ApiPost的环境变量,解决这种需要 ...