今天解决仅解决了3个小问题，make zImage 成功，还是值得欣慰的。
5242880 bytes read: OK
但是kernel烧进去后还是无法启动，DNW显示卡在Uncompressing Linux... done, booting the kernel.
就不动了，怀疑哪个ID设置错误。。。
看来不是ID错误
解决方案：在配置内核时选上在Device Drivers->Character devices->Serial drivers中选择加载Samsung SoC serial support ,然后再选上Support for console on Samsung SoC serial port
现在打印出来：
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8 (root@yinkai-X38-DQ6) (gcc version 4.2.2) #4 Mon Jul 16 19:24:19 CST 2012
[ 0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: ok6410
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU S3C6410 (id 0x36410101)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] camera: no parent clock specified
[ 0.000000] S3C64XX: PLL settings, A=800000000, M=532000000, E=24000000
[ 0.000000] S3C64XX: HCLK2=266666666, HCLK=133333333, PCLK=66666666
[ 0.000000] mout_apll: source is fout_apll (1), rate is 800000000
[ 0.000000] mout_epll: source is epll (1), rate is 24000000
[ 0.000000] mout_mpll: source is mpll (1), rate is 532000000
[ 0.000000] usb-bus-host: source is clk_48m (0), rate is 48000000
[ 0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] irda-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] camera: no parent clock specified
[ 0.000000] CPU: found DTCM0 8k @ 00000000, not enabled
[ 0.000000] CPU: moved DTCM0 8k to fffe8000, enabled
[ 0.000000] CPU: found DTCM1 8k @ 00000000, not enabled
[ 0.000000] CPU: moved DTCM1 8k to fffea000, enabled
[ 0.000000] CPU: found ITCM0 8k @ 00000000, not enabled
[ 0.000000] CPU: moved ITCM0 8k to fffe0000, enabled
[ 0.000000] CPU: found ITCM1 8k @ 00000000, not enabled
[ 0.000000] CPU: moved ITCM1 8k to fffe2000, enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=cramfs console=ttySAC0,115200
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 251096k/251096k available, 11048k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] DTCM : 0xfffe8000 - 0xfffec000 ( 16 kB)
[ 0.000000] ITCM : 0xfffe0000 - 0xfffe4000 ( 16 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0699530 (6726 kB)
[ 0.000000] .init : 0xc069a000 - 0xc06e0000 ( 280 kB)
[ 0.000000] .data : 0xc06e0000 - 0xc072e618 ( 314 kB)
[ 0.000000] .bss : 0xc072f024 - 0xc0808674 ( 870 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:246 nr_irqs:246 246
[ 0.000000] VIC @f6000000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @f6010000: id 0x00041192, vendor 0x41
[ 0.000000] Console: colour dummy device 80x30
[ 0.010000] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 0.050000] pid_max: default: 32768 minimum: 301
[ 0.050000] Security Framework initialized
[ 0.050000] AppArmor: AppArmor initialized
[ 0.050000] Mount-cache hash table entries: 512
[ 0.050000] Initializing cgroup subsys cpuacct
[ 0.050000] Initializing cgroup subsys memory
[ 0.050000] Initializing cgroup subsys devices
[ 0.050000] Initializing cgroup subsys freezer
[ 0.050000] Initializing cgroup subsys net_cls
[ 0.050000] CPU: Testing write buffer coherency: ok
[ 0.050000] ftrace: allocating 18660 entries in 55 pages
[ 0.110000] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.110000] Setting up static identity map for 0x5049ad88 - 0x5049ade4
[ 0.110000] devtmpfs: initialized
[ 0.110000] gpiochip_add: registered GPIOs 38 to 53 on device: GPF
[ 0.110000] gpiochip_add: registered GPIOs 74 to 89 on device: GPI
[ 0.110000] gpiochip_add: registered GPIOs 91 to 102 on device: GPJ
[ 0.110000] gpiochip_add: registered GPIOs 161 to 176 on device: GPO
[ 0.110000] gpiochip_add: registered GPIOs 178 to 192 on device: GPP
[ 0.110000] gpiochip_add: registered GPIOs 194 to 202 on device: GPQ
[ 0.110000] gpiochip_add: registered GPIOs 144 to 159 on device: GPN
[ 0.110000] gpiochip_add: registered GPIOs 0 to 7 on device: GPA
[ 0.110000] gpiochip_add: registered GPIOs 9 to 15 on device: GPB
[ 0.110000] gpiochip_add: registered GPIOs 17 to 24 on device: GPC
[ 0.110000] gpiochip_add: registered GPIOs 26 to 30 on device: GPD
[ 0.110000] gpiochip_add: registered GPIOs 32 to 36 on device: GPE
[ 0.110000] gpiochip_add: registered GPIOs 55 to 61 on device: GPG
[ 0.110000] gpiochip_add: registered GPIOs 137 to 142 on device: GPM
[ 0.110000] gpiochip_add: registered GPIOs 63 to 72 on device: GPH
[ 0.110000] gpiochip_add: registered GPIOs 104 to 119 on device: GPK
[ 0.110000] gpiochip_add: registered GPIOs 121 to 135 on device: GPL
[ 0.110000] print_constraints: dummy:
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] ok6410: Option string ok6410=0
[ 0.120000] ok6410: selected LCD display is 480x272
[ 0.120000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.120000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.120000] S3C6410: Initialising architecture
[ 0.130000] bio: create slab <bio-0> at 0
[ 0.130000] SCSI subsystem initialized
[ 0.130000] usbcore: registered new interface driver usbfs
[ 0.130000] usbcore: registered new interface driver hub
[ 0.130000] usbcore: registered new device driver usb
[ 0.130000] NetLabel: Initializing
[ 0.130000] NetLabel: domain hash size = 128
[ 0.130000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.130000] NetLabel: unlabeled traffic allowed by default
[ 0.160000] AppArmor: AppArmor Filesystem Enabled
[ 0.190000] NET: Registered protocol family 2
[ 0.190000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.200000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.200000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.200000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.200000] TCP reno registered
[ 0.200000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.200000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.200000] NET: Registered protocol family 1
[ 0.200000] audit: initializing netlink socket (disabled)
[ 0.200000] type=2000 audit(0.200:1): initialized
[ 0.340000] VFS: Disk quotas dquot_6.5.2
[ 0.340000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.350000] fuse init (API version 7.18)
[ 0.350000] msgmni has been set to 490
[ 0.350000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.350000] io scheduler noop registered
[ 0.350000] io scheduler deadline registered
[ 0.350000] io scheduler cfq registered (default)
[ 0.350000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.360000] s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 69) is a S3C6400/10
[ 0.370000] console [ttySAC0] enabled
[ 0.370000] s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 70) is a S3C6400/10
[ 0.380000] s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 71) is a S3C6400/10
[ 0.390000] s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 72) is a S3C6400/10
[ 0.410000] brd: module loaded
[ 0.420000] loop: module loaded
[ 0.420000] Fixed MDIO Bus: probed
[ 0.420000] tun: Universal TUN/TAP device driver, 1.6
[ 0.430000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.430000] PPP generic driver version 2.4.2
[ 0.440000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.450000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
[ 0.450000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
[ 0.460000] s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
[ 0.520000] s3c2410-ohci s3c2410-ohci: init err (00000000 0000)
[ 0.520000] ohci_hcd: can't start s3c24xx
[ 0.520000] s3c2410-ohci s3c2410-ohci: startup error -75
[ 0.520000] s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
[ 0.530000] s3c2410-ohci: probe of s3c2410-ohci failed with error -75
[ 0.540000] mousedev: PS/2 mouse device common for all mice
[ 0.540000] device-mapper: uevent: version 1.0.3
[ 0.550000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.560000] device-mapper: multipath: version 1.3.0 loaded
[ 0.560000] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.570000] cpufreq: Failed to obtain VDDARM: -19
[ 0.570000] cpufreq: Only frequency scaling available
[ 0.580000] cpuidle: using governor ladder
[ 0.580000] TCP cubic registered
[ 0.590000] NET: Registered protocol family 10
[ 0.590000] NET: Registered protocol family 17
[ 0.590000] Registering the dns_resolver key type
[ 0.600000] registered taskstats version 1
[ 0.600000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.610000] md: Waiting for all devices to be available before autodetect
[ 0.610000] md: If you don't use raid, use raid=noautodetect
[ 0.620000] md: Autodetecting RAID arrays.
[ 0.620000] md: Scanned 0 and added 0 devices.
[ 0.630000] md: autorun ...
[ 0.630000] md: ... autorun DONE.
[ 0.640000] VFS: Cannot open root device "mtdblock2" or unknown-block(0,0)
[ 0.640000] Please append a correct "root=" boot option; here are the available partitions:
[ 0.650000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 0.660000] [<c000fdc8>] (unwind_backtrace+0x0/0xfc) from [<c000d1f4>] (dump_stack+0x1c/0x20)
[ 0.670000] [<c000d1f4>] (dump_stack+0x1c/0x20) from [<c001c764>] (panic+0x80/0x1f4)
[ 0.670000] [<c001c764>] (panic+0x80/0x1f4) from [<c069adc4>] (mount_block_root+0x12c/0x2d8)
[ 0.680000] [<c069adc4>] (mount_block_root+0x12c/0x2d8) from [<c069afc4>] (mount_root+0x54/0x6c)
[ 0.690000] [<c069afc4>] (mount_root+0x54/0x6c) from [<c069b13c>] (prepare_namespace+0x160/0x1f4)
[ 0.700000] [<c069b13c>] (prepare_namespace+0x160/0x1f4) from [<c069a664>] (kernel_init+0x114/0x15c)
[ 0.710000] [<c069a664>] (kernel_init+0x114/0x15c) from [<c0009f70>] (kernel_thread_exit+0x0/0x8)
这个错误在于kernel配置fs时出现问题，解决方案：
kernel 配置时：device drivers -> Memory Technology Device (MTD) support --->Caching block device access to MTD devices 选上
现在进行到：[ 0.590000] Kernel panic - not syncing: Attempted to kill init!
n: serial
Out:
serial
Err:
serial
Hit any key to stop autoboot:
0
NAND read: device 0 offset 0x100000, size 0x500000
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[
0.000000] Booting Linux on physical CPU 0
[
0.000000] Initializing cgroup subsys cpuset
[
0.000000] Initializing cgroup subsys cpu
[
0.000000] Linux version 3.3.8 (root@u1104x32) (gcc version 4.2.2) #5 Tue Jul 17 17:35:08 CST 2012
[
0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387d
[
0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[
0.000000] Machine: ok6410
[
0.000000] Memory policy: ECC disabled, Data cache writeback
[
0.000000] CPU S3C6410 (id 0x36410101)
[
0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[
0.000000] camera: no parent clock specified
[
0.000000] S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
[
0.000000] S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
[
0.000000] mout_apll: source is fout_apll (1), rate is 532000000
[
0.000000] mout_epll: source is epll (1), rate is 24000000
[
0.000000] mout_mpll: source is mpll (1), rate is 532000000
[
0.000000] usb-bus-host: source is clk_48m (0), rate is 48000000
[
0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[
0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[
0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[
0.000000] irda-bus: source is mout_epll (0), rate is 24000000
[
0.000000] camera: no parent clock specified
[
0.000000] CPU: found DTCM0 8k @ 00000000, not enabled
[
0.000000] CPU: moved DTCM0 8k to fffe8000, enabled
[
0.000000] CPU: found DTCM1 8k @ 00000000, not enabled
[
0.000000] CPU: moved DTCM1 8k to fffea000, enabled
[
0.000000] CPU: found ITCM0 8k @ 00000000, not enabled
[
0.000000] CPU: moved ITCM0 8k to fffe0000, enabled
[
0.000000] CPU: found ITCM1 8k @ 00000000, not enabled
[
0.000000] CPU: moved ITCM1 8k to fffe2000, enabled
[
0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 65024
[
0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=cramfs console=ttySAC0,115200
[
0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[
0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[
0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[
0.000000] allocated 524288 bytes of page_cgroup
[
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[
0.000000] Memory: 256MB = 256MB total
[
0.000000] Memory: 251052k/251052k available, 11092k reserved, 0K highmem
[
0.000000] Virtual kernel memory layout:
[
0.000000]
vector
: 0xffff0000 - 0xffff1000
(
4 kB)
[
0.000000]
DTCM
: 0xfffe8000 - 0xfffec000
(
16 kB)
[
0.000000]
ITCM
: 0xfffe0000 - 0xfffe4000
(
16 kB)
[
0.000000]
fixmap
: 0xfff00000 - 0xfffe0000
( 896 kB)
[
0.000000]
vmalloc : 0xd0800000 - 0xff000000
( 744 MB)
[
0.000000]
lowmem
: 0xc0000000 - 0xd0000000
( 256 MB)
[
0.000000]
pkmap
: 0xbfe00000 - 0xc0000000
(
2 MB)
[
0.000000]
modules : 0xbf000000 - 0xbfe00000
(
14 MB)
[
0.000000]
.text : 0xc0008000 - 0xc06b7c78
(6848 kB)
[
0.000000]
.init : 0xc06b8000 - 0xc06ff000
( 284 kB)
[
0.000000]
.data : 0xc0700000 - 0xc0755278
( 341 kB)
[
0.000000]
.bss : 0xc0756024 - 0xc08122f4
( 753 kB)
[
0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[
0.000000] NR_IRQS:246 nr_irqs:246 246
[
0.000000] VIC @f6000000: id 0x00041192, vendor 0x41
[
0.000000] VIC @f6010000: id 0x00041192, vendor 0x41
[
0.000000] Console: colour dummy device 80x30
[
0.010000] Calibrating delay loop... 528.79 BogoMIPS (lpj=2643968)
[
0.060000] pid_max: default: 32768 minimum: 301
[
0.070000] Security Framework initialized
[
0.070000] AppArmor: AppArmor initialized
[
0.070000] Mount-cache hash table entries: 512
[
0.070000] Initializing cgroup subsys cpuacct
[
0.070000] Initializing cgroup subsys memory
[
0.070000] Initializing cgroup subsys devices
[
0.070000] Initializing cgroup subsys freezer
[
0.070000] Initializing cgroup subsys net_cls
[
0.070000] Initializing cgroup subsys blkio
[
0.070000] CPU: Testing write buffer coherency: ok
[
0.070000] ftrace: allocating 19131 entries in 57 pages
[
0.130000] hw perfevents: enabled with v6 PMU driver, 3 counters available
[
0.130000] Setting up static identity map for 0x504b12c8 - 0x504b1324
[
0.130000] devtmpfs: initialized
[
0.140000] gpiochip_add: registered GPIOs 38 to 53 on device: GPF
[
0.140000] gpiochip_add: registered GPIOs 74 to 89 on device: GPI
[
0.140000] gpiochip_add: registered GPIOs 91 to 102 on device: GPJ
[
0.140000] gpiochip_add: registered GPIOs 161 to 176 on device: GPO
[
0.140000] gpiochip_add: registered GPIOs 178 to 192 on device: GPP
[
0.140000] gpiochip_add: registered GPIOs 194 to 202 on device: GPQ
[
0.140000] gpiochip_add: registered GPIOs 144 to 159 on device: GPN
[
0.140000] gpiochip_add: registered GPIOs 0 to 7 on device: GPA
[
0.140000] gpiochip_add: registered GPIOs 9 to 15 on device: GPB
[
0.140000] gpiochip_add: registered GPIOs 17 to 24 on device: GPC
[
0.140000] gpiochip_add: registered GPIOs 26 to 30 on device: GPD
[
0.140000] gpiochip_add: registered GPIOs 32 to 36 on device: GPE
[
0.140000] gpiochip_add: registered GPIOs 55 to 61 on device: GPG
[
0.140000] gpiochip_add: registered GPIOs 137 to 142 on device: GPM
[
0.140000] gpiochip_add: registered GPIOs 63 to 72 on device: GPH
[
0.140000] gpiochip_add: registered GPIOs 104 to 119 on device: GPK
[
0.140000] gpiochip_add: registered GPIOs 121 to 135 on device: GPL
[
0.140000] print_constraints: dummy:
[
0.140000] NET: Registered protocol family 16
[
0.140000] ok6410: Option string ok6410=0
[
0.140000] ok6410: selected LCD display is 480x272
[
0.140000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[
0.140000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[
0.140000] S3C6410: Initialising architecture
[
0.160000] bio: create slab <bio-0> at 0
[
0.160000] SCSI subsystem initialized
[
0.160000] usbcore: registered new interface driver usbfs
[
0.160000] usbcore: registered new interface driver hub
[
0.160000] usbcore: registered new device driver usb
[
0.160000] NetLabel: Initializing
[
0.160000] NetLabel:
domain hash size = 128
[
0.160000] NetLabel:
protocols = UNLABELED CIPSOv4
[
0.160000] NetLabel:
unlabeled traffic allowed by default
[
0.200000] AppArmor: AppArmor Filesystem Enabled
[
0.230000] NET: Registered protocol family 2
[
0.230000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[
0.230000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[
0.230000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[
0.230000] TCP: Hash tables configured (established 8192 bind 8192)
[
0.230000] TCP reno registered
[
0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[
0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[
0.230000] NET: Registered protocol family 1
[
0.230000] audit: initializing netlink socket (disabled)
[
0.230000] type=2000 audit(0.230:1): initialized
[
0.440000] VFS: Disk quotas dquot_6.5.2
[
0.440000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[
0.440000] fuse init (API version 7.18)
[
0.440000] msgmni has been set to 490
[
0.450000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[
0.450000] io scheduler noop registered
[
0.450000] io scheduler deadline registered
[
0.450000] io scheduler cfq registered (default)
[
0.450000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[
0.470000] s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 69) is a S3C6400/10
[
0.480000] console [ttySAC0] enabled
[
0.480000] s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 70) is a S3C6400/10
[
0.490000] s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 71) is a S3C6400/10
[
0.500000] s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 72) is a S3C6400/10
[
0.520000] brd: module loaded
[
0.540000] loop: module loaded
[
0.540000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
[
0.540000] s3c24xx-nand s3c6400-nand: Tacls=4, 30ns Twrph0=8 60ns, Twrph1=6 45ns
[
0.550000] s3c24xx-nand s3c6400-nand: System booted from NAND
[
0.550000] s3c24xx-nand s3c6400-nand: NAND soft ECC
[
0.560000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
[
0.570000] No oob scheme defined for oobsize 218
[
0.570000] ------------[ cut here ]------------
[
0.570000] kernel BUG at drivers/mtd/nand/nand_base.c:3269!
[
0.570000] Internal error: Oops - BUG: 0 [#1]
[
0.570000] Modules linked in:
[
0.570000] CPU: 0
Not tainted
(3.3.8 #5)
[
0.570000] PC is at nand_scan_tail+0xc8/0x62c
[
0.570000] LR is at console_unlock+0x1d4/0x234
[
0.570000] pc : [<c032f1e8>]
lr : [<c001d638>]
psr: 60000013
[
0.570000] sp : cf835e20
ip : c0702028
fp : cf835e3c
[
0.570000] r10: 00000000
r9 : c070d7f0
r8 : c070d7e8
[
0.570000] r7 : cf8ac040
r6 : cf949800
r5 : cf949a40
r4 : cf949a40
[
0.570000] r3 : 1d11931a
r2 : 1d11931a
r1 : 000026e4
r0 : 0000003b
[
0.570000] Flags: nZCv
IRQs on
FIQs on
Mode SVC_32
ISA ARM
Segment kernel
[
0.570000] Control: 00c5387d
Table: 50004008
DAC: 00000017
[
0.570000] Process swapper (pid: 1, stack limit = 0xcf834268)
[
0.570000] Stack: (0xcf835e20 to 0xcf836000)
[
0.570000] 5e20: cf949a40 cfa0d4e0 cf949800 cf8ac040 cf835e84 cf835e40 c0336148 c032f12c
[
0.570000] 5e40: 00000000 00000000 c070d7f8 00000001 00000000 00000001 cf835e74 c070d7f0
[
0.570000] 5e60: c080ca44 c0740ba8 c0740ba8 cfa0d480 00000000 00000000 cf835e94 cf835e88
[
0.570000] 5e80: c02ca530 c0335f08 cf835eb4 cf835e98 c02c8ef0 c02ca518 c070d7f0 c070d824
[
0.570000] 5ea0: c0740ba8 c02c9154 cf835ed4 cf835eb8 c02c91e8 c02c8dc8 cf835ed4 00000000
[
0.570000] 5ec0: cf835ed8 c0740ba8 cf835efc cf835ed8 c02c7954 c02c9160 cf80f1cc cf89fc90
[
0.570000] 5ee0: c060368c c06fdff8 c0740ba8 c0734248 cf835f0c cf835f00 c02c8c98 c02c7900
[
0.570000] 5f00: cf835f3c cf835f10 c02c887c c02c8c80 c060368c 00000000 00000000 c06fdff8
[
0.570000] 5f20: c0740ba8 00000013 c06d9370 cf834000 cf835f64 cf835f40 c02c9780 c02c86e8
[
0.570000] 5f40: cf835f64 00000000 c06fdff8 c06fe5a4 00000013 c06d9370 cf835f74 cf835f68
[
0.570000] 5f60: c02ca878 c02c9724 cf835f84 cf835f78 c06d938c c02ca834 cf835fd4 cf835f88
[
0.570000] 5f80: c0008774 c06d937c c0710eb4 00000000 c06fe5a4 00000013 00000000 00000000
[
0.570000] 5fa0: cf835fbc cf835fb0 c0040a28 c06fe45c c06fdff8 c06fe5a4 00000013 00000000
[
0.570000] 5fc0: 00000000 00000000 cf835ff4 cf835fd8 c06b8600 c0008658 00000000 00000000
[
0.570000] 5fe0: c06b8550 c0009f70 00000000 cf835ff8 c0009f70 c06b855c ffffffff ffffffff
[
0.570000] [<c032f1e8>] (nand_scan_tail+0xc8/0x62c) from [<c0336148>] (s3c24xx_nand_probe+0x24c/0x508)
[
0.570000] [<c0336148>] (s3c24xx_nand_probe+0x24c/0x508) from [<c02ca530>] (platform_drv_probe+0x24/0x28)
[
0.570000] [<c02ca530>] (platform_drv_probe+0x24/0x28) from [<c02c8ef0>] (driver_probe_device+0x134/0x1b4)
[
0.570000] [<c02c8ef0>] (driver_probe_device+0x134/0x1b4) from [<c02c91e8>] (__driver_attach+0x94/0x98)
[
0.570000] [<c02c91e8>] (__driver_attach+0x94/0x98) from [<c02c7954>] (bus_for_each_dev+0x60/0x8c)
[
0.570000] [<c02c7954>] (bus_for_each_dev+0x60/0x8c) from [<c02c8c98>] (driver_attach+0x24/0x2c)
[
0.570000] [<c02c8c98>] (driver_attach+0x24/0x2c) from [<c02c887c>] (bus_add_driver+0x1a0/0x258)
[
0.570000] [<c02c887c>] (bus_add_driver+0x1a0/0x258) from [<c02c9780>] (driver_register+0x68/0x144)
[
0.570000] [<c02c9780>] (driver_register+0x68/0x144) from [<c02ca878>] (platform_driver_register+0x50/0x64)
[
0.570000] [<c02ca878>] (platform_driver_register+0x50/0x64) from [<c06d938c>] (s3c2410_nand_init+0x1c/0x28)
[
0.570000] [<c06d938c>] (s3c2410_nand_init+0x1c/0x28) from [<c0008774>] (do_one_initcall+0x128/0x17c)
[
0.570000] [<c0008774>] (do_one_initcall+0x128/0x17c) from [<c06b8600>] (kernel_init+0xb0/0x15c)
[
0.570000] [<c06b8600>] (kernel_init+0xb0/0x15c) from [<c0009f70>] (kernel_thread_exit+0x0/0x8)
[
0.570000] Code: e3510008 0a0000dc e59f04c4 ebf3bb35 (e7f001f2)
[
0.580000] ---[ end trace 8f0a1ae9dcfc695e ]---
[
0.590000] Kernel panic - not syncing: Attempted to kill init!