spring boot应用p6spy监控sql

### # #%L # P6Spy # %% # Copyright (C) 2013 P6Spy # %% # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # /licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # #L% ### ################################################################# # P6Spy Options File # # See documentation for detailed instructions # # /p6spy/2.0/ # ################################################################# ################################################################# # MODULES # # # # Module list adapts the modular functionality of P6Spy. # # Only modules listed are active. # # (default is com..P6LogFactory and # # com..P6SpyFactory) # # Please note that the core module (P6SpyFactory) can't be # # deactivated. # # Unlike the other properties, activation of the changes on # # this one requires reload. # ################################################################# #modulelist=com..P6SpyFactory,com..P6LogFactory,com..P6OutageFactory modulelist=com..P6SpyFactory,com..P6LogFactory,com..P6OutageFactory ################################################################ # CORE (P6SPY) PROPERTIES # ################################################################ # A comma separated list of JDBC drivers to load and register. # (default is empty) # # Note: This is normally only needed when using P6Spy in an # application server environment with a JNDI data source or when # using a JDBC driver that does not implement the JDBC 4.0 API # (specifically automatic registration). #driverlist= #url="jdbc:p6spy:oracle:thin:@localhost:1521:orcl" 其中的p6spy必须要，因为这样才会被拦截 #drive=com..P6SpyDriver #driverlist= driverlist= # for flushing per statement # (default is false) #autoflush = false # prints a stack trace for every statement logged #stacktrace=false # if stacktrace=true, specifies the stack trace to print #stacktraceclass= # determines if property file should be reloaded # Please note: reload means forgetting all the previously set # settings (even those set during runtime - via JMX) # and starting with the clean table # (default is false) #reloadproperties=false # determines how often should be reloaded in seconds # (default is 60) #reloadpropertiesinterval=60 # specifies the appender to use for logging # Please note: reload means forgetting all the previously set # settings (even those set during runtime - via JMX) # and starting with the clean table # (only the properties read from the configuration file) # (default is com.) #appender=com..Slf4JLogger #appender=com. appender=com. # name of logfile to use, note Windows users should make sure to use forward slashes in their pathname (e:/test/) # (used for com. only) # (default is ) #logfile = #windows 用户请用 C:/ 格式，不要用\ logfile =d:/ # append to the p6spy log file. if this is set to false the # log file is truncated every time. (file logger only) # (default is true) #追加到 p6spy 日志文件。如果设置为false #日志文件被截断每次。 （只限于文件记录器） #（默认为true） #append=true # class to use for formatting log messages (default is: com.) #多行输出为 com. #行的时间格式化配置在 dateformat 设定 #current time|execution time|category|connection id|statement SQL String|effective SQL string #日志格式为 当前时间戳|执行语句花费的时间|调用的类别|connectionId|声明SQL字符串|有效的SQL字符串 #logMessageFormat=com. # format that is used for logging of the date/time/... (has to be compatible with ) # (default is dd-MMM-yy) databaseDialectDateFormat=yyyy-MM-dd HH:mm:ss # sets the date format using Java's SimpleDateFormat routine. # In case property is not set, miliseconds since 1.1.1970 (unix time) is used (default is empty) #dateformat= dateformat=yyyy-MM-dd HH:mm:ss # whether to expose options via JMX or not # (default is true) #jmx=true # if exposing options via jmx (see option: jmx), what should be the prefix used? # jmx naming pattern constructed is: com.p6spy(.<jmxPrefix>)?:name=<optionsClassName> # please note, if there is already such a name in use it would be unregistered first (the last registered wins) # (default is none) #jmxPrefix= ################################################################# # DataSource replacement # # # # Replace the real DataSource class in your application server # # configuration with the name com..P6DataSource # # (that provides also connection pooling and xa support). # # then add the JNDI name and class name of the real # # DataSource here # # # # Values set in this item cannot be reloaded using the # # reloadproperties variable. Once it is loaded, it remains # # in memory until the application is restarted. # # # ################################################################# #realdatasource=/RealMySqlDS #realdatasourceclass=. ################################################################# # DataSource properties # # # # If you are using the DataSource support to intercept calls # # to a DataSource that requires properties for proper setup, # # define those properties here. Use name value pairs, separate # # the name and value with a semicolon, and separate the # # pairs with commas. # # # # The example shown here is for mysql # # # ################################################################# #realdatasourceproperties=port;3306,serverName;myhost,databaseName;jbossdb,foo;bar ################################################################# # JNDI DataSource lookup # # # # If you are using the DataSource support outside of an app # # server, you will probably need to define the JNDI Context # # environment. # # # # If the P6Spy code will be executing inside an app server then # # do not use these properties, and the DataSource lookup will # # use the naming context defined by the app server. # # # # The two standard elements of the naming environment are # # jndicontextfactory and jndicontextproviderurl. If you need # # additional elements, use the jndicontextcustom property. # # You can define multiple properties in jndicontextcustom, # # in name value pairs. Separate the name and value with a # # semicolon, and separate the pairs with commas. # # # # The example shown here is for a standalone program running on # # a machine that is also running JBoss, so the JDNI context # # is configured for JBoss (3.0.4). # # # # (by default all these are empty) # ################################################################# #jndicontextfactory= #jndicontextproviderurl=localhost:1099 #jndicontextcustom=;: #jndicontextfactory= #jndicontextproviderurl=iiop://localhost:900 ################################################################ # P6 LOGGING SPECIFIC PROPERTIES # ################################################################ # filter what is logged # please note this is a precondition for usage of: include/exclude/sqlexpression # (default is false) #filter=false # comma separated list of strings to include # please note that special characters escaping (used in java) has to be done for the provided regular expression # (default is empty) #include = # comma separated list of strings to exclude # (default is empty) #exclude = # sql expression to evaluate if using regex # please note that special characters escaping (used in java) has to be done for the provided regular expression # (default is empty) #sqlexpression = #list of categories to exclude: error, info, batch, debug, statement, #commit, rollback and result are valid values # (default is info,debug,result,resultset,batch) #excludecategories=info,debug,result,resultset,batch # Execution threshold applies to the standard logging of P6Spy. # While the standard logging logs out every statement # regardless of its execution time, this feature puts a time # condition on that logging. Only statements that have taken # longer than the time specified (in milliseconds) will be # logged. This way it is possible to see only statements that # have exceeded some high water mark. # This time is reloadable. # # executionThreshold=integer time (milliseconds) # (default is 0) #executionThreshold= ################################################################ # P6 OUTAGE SPECIFIC PROPERTIES # ################################################################ # Outage Detection # # This feature detects long-running statements that may be indicative of # a database outage problem. If this feature is turned on, it will log any # statement that surpasses the configurable time boundary during its execution. # When this feature is enabled, no other statements are logged except the long # running statements. The interval property is the boundary time set in seconds. # For example, if this is set to 2, then any statement requiring at least 2 # seconds will be logged. Note that the same statement will continue to be logged # for as long as it executes. So if the interval is set to 2, and the query takes # 11 seconds, it will be logged 5 times (at the 2, 4, 6, 8, 10 second intervals). # # outagedetection=true|false # outagedetectioninterval=integer time (seconds) # # (default is false) #outagedetection=false # (default is 60) #outagedetectioninterval=30