nevion TNS4200 是一款用于持续监测广播流和信号的强大工具箱。 它能够在易用且直观的用户界面中实现快速故障检测和诊断。
Applications
• Monitoring of head-ends for IPTV, Satellite, Cable and DTT networks
• Remote monitoring of signals in DTT networks
• End-to-end monitoring of contribution links
• SLA compliance monitoring
Key features
• Very high input density per 1RU with up to
• 300 simultaneous TSoIP inputs (SPTS)
• 20 simultaneous ASI inputs
• 8 simultaneous DVB-S/S2 /T/T2 inputs
• QoS monitoring
• IP/UDP/RTP monitoring
• ETSI TR101 290 priority 1-3
• Service and PIDs monitoring (bit rates, names,components,...)
• Ad-insertion monitoring and logging (SCTE35)
• Template monitoring down to component level
• HbbTV monitoring
• SLA monitoring
• QoE monitoring
• Thumbnail display
• Black and freeze frame detection (configurable thresholds)
• Audio Silence monitoring
• EPG analysis and monitoring w/ built-in EPG viewer
• T2-MI and SFN monitoring
TNS4200 Media Monitoring Probe – Base Unit
TNS4200-HW-F4-AC TNS4200 Media Monitoring Probe base unit (1RU) that can hold up to four (4) factory-installed modules (fixed back panel). 4x GigE ports (2x 100/1000Base-T, 2x 1000-BaseX SFP), 4 enabled inputs on the 4 BNC connectors for (ASI/SDI). Built-in ETSI TR 101 290 Priority 1 monitoring. Single 110V/220V AC PSU.
TNS4200-HW-F4-AC2 TNS4200 Media Monitoring Probe base unit (1RU) that can hold up to four (4) factory-installed modules (fixed back panel). 4x GigE ports (2x 100/1000Base-T, 2x 1000-BaseX SFP), 4 enabled inputs on the 4 BNC connectors for (ASI/SDI). Built-in ETSI TR 101 290 Priority 1 monitoring. Dual load-sharing 110V/220V AC PSUs.
TNS4200-HW-M4-AC2 TNS4200 Media Monitoring Probe base unit (1RU) that can hold up to four (4) field-installable modules (modular back panel). 4x GigE ports (2x 100/1000Base-T, 2x 1000-BaseX SFP), 4 enabled inputs on the 4 BNC connectors for (ASI/SDI). Built-in ETSI TR 101 290 Priority 1 monitoring. Dual load-sharing 110V/220V AC PSUs.
TNS4200 Media Monitoring Probe – Hardware Options
NX-HW-ASI-X4-F Hardware option - 4-port ASI board (requires factory installation). The direction of each port is configurable as input or output. Includes basic TS input monitoring (ETSI TR 101 290 pri 1 and bit rate alarms). BNC conn. (75 Ohm).
NX-HW-ASI-X4-M Hardware option - 4-port ASI board (modular version). The direction of each port is configurable as input or output. Includes basic TS input monitoring (ETSI TR 101 290 pri 1 and bit rate alarms). BNC connectors (75 Ohm).
NX-HW-S/S2-DEMOD-X2-F Hardware option - DVB-S/S2 demodulator board with two inputs, (F-connectors, demodulate 2 signals). This board is fitted in the fixed chassis.
NX-HW-T/T2-DEMOD-X2-F Hardware option - DVB-T2 demodulator board with two inputs, (demodulate 2 signals). This board is fitted in the fixed chassis.
NX-HW-T/T2-DEMOD-X2-M Hardware option - DVB-T2 demodulator board with two inputs, (demodulate 2 signals). This board is used in the modular chassis.
TNS4200 Media Monitoring Probe – Software Options
TNS4200-SW-MPTX Software option - Transport Stream input for (X=1,5,10,25) MPTS/SPTS for basic monitoring including ETR290 priority1, bit rate alarms (PID, service, TS bit rate), scrambling alarms, Service missing, incorrect TS ID, IP/RTP alarms.
TNS4200-SW-SPTX Software option - Bundle for (X= 10, 25, 50, 100, 200) SPTSs inputs for basic monitoring including ETR290 priority1, bit ratealarms (PID, service, TS bit rate), scrambling alarms, Service missing, incorrect TS ID, IP/RTP alarms.
TNS4200-SW-AMMX Software option - Enable advanced monitoring for (X= 1, 5, 10, 25) MPTS input including TR101 290 priority 2 and 3, extended EIT monitoring, template monitoring, (deviation of components down to the descriptors), DVB-T MIP, SCTE35 monitoring.
TNS4200-SW-AMP2 Software option - Enable monitoring of ETR290 priority 2 alarms and template alarms (one time license per unit) for SPTSs. This license is binary (on/off)
TNS4200-SW-QoESX Software option - Enable the detection of black/freeze frames, audio silence (MP1L2 and AAC) and thumbnail display for (X=1, 10,.20) services.
TNS4200-SW-T2AXX Software option - Enable the monitoring and analysis of (X=1, 5, 10) T2-MI streams. This license enables the monitoring of the T2-MI layer and enables the TS input to receive the T2-MI.
TNS4200-SW-PLPEXTX Software option - Enable the extraction of (X=1, 5, 10) PLP from the T2-MI. The PLP is monitored according to ETR290 and treated as a TS.
TNS4200-SW-TSOX Software option - Enable (X=1, 5, 10) TS outputs on IP (up to 4 IP destinations) or ASI (using available ports in TNS4200 chassis). Can be used to forward the streams to a remote location for confidence monitoring.
TNS4200-SW-AS2 Software option - Enable the advanced DVB-S2 profiles (16 APSK/32 APSK, ISSY, multi-stream). This option requires the NX-S/S2-DEMOD-X2-F hardware.
TNS4200-SW-FEC Software option - Enable decoding and monitoring of FEC streams at the input (SMPTE2022-1)