1. 前言
校验和计算是NAT功能和内容修改功能的基本功，这些操作进行后都需要修改数据头中的校验和。
2. 16位校验和计算
2.1 基本原理
IP/ICMP/IGMP/TCP/UDP等协议的校验和算法都是相同的，采用的都是将数据流视为16位整数流进行重复叠加计算。为了计算检验和，首先把检验和字段置为0。然后，对有效数据范围内中每个16位进行二进制反码求和，结果存在检验和字段中，如果数据长度为奇数则补一字节0。当收到数据后，同样对有效数据范围中每个16位数进行二进制反码的求和。由于接收方在计算过程中包含了发送方存在首部中的检验和，因此，如果首部在传输过程中没有发生任何差错，那么接收方计算的结果应该为全0或全1(具体看实现了,本质一样) 。如果结果不是全0或全1，那么表示数据错误。
IP/ICMP/IGMP/TCP/UDP等协议的校验和算法都是相同的，采用的都是将数据流视为16位整数流进行重复叠加计算。为了计算检验和，首先把检验和字段置为0。然后，对有效数据范围内中每个16位进行二进制反码求和，结果存在检验和字段中，如果数据长度为奇数则补一字节0。当收到数据后，同样对有效数据范围中每个16位数进行二进制反码的求和。由于接收方在计算过程中包含了发送方存在首部中的检验和，因此，如果首部在传输过程中没有发生任何差错，那么接收方计算的结果应该为全0或全1(具体看实现了,本质一样) 。如果结果不是全0或全1，那么表示数据错误。
2.2 程序算法
2.2.1 C实现
这是RFC1071中提供的C语言程序：
这是RFC1071中提供的C语言程序：
unsigned short csum(unsigned char *addr, int count)
{
/* Compute Internet Checksum for "count" bytes
* beginning at location "addr".
*/
register long sum = 0;
{
/* Compute Internet Checksum for "count" bytes
* beginning at location "addr".
*/
register long sum = 0;
while( count > 1 ) {
/* This is the inner loop */
sum += * (unsigned short) addr++;
count -= 2;
}
/* This is the inner loop */
sum += * (unsigned short) addr++;
count -= 2;
}
/* Add left-over byte, if any */
if( count > 0 )
sum += * (unsigned char *) addr;
if( count > 0 )
sum += * (unsigned char *) addr;
/* Fold 32-bit sum to 16 bits */
while (sum>>16)
sum = (sum & 0xffff) + (sum >> 16);
while (sum>>16)
sum = (sum & 0xffff) + (sum >> 16);
return ~sum;
}
}
当然，如果用汇编语言实现计算速度会快得多，对于不同的CPU体系，需要各自对应编写不同的汇编，在Linux内核源代码中有各种CPU体系的IP校验和计算源代码。
2.2.2 增量式修改
如果只修改了一个字节，如只修改IP头中的TTL，重新计算校验和时是没必要将所有数据范围内数据重新计算一遍的，RFC1141中提出了增量式算法：
~C\' = ~(C + (-m) + m\') = ~C + (m - m\') = ~C + m + ~m\'
C\'为修改后的校验和，C为修改前的校验和，m为修改前的数值，m\'为修改后的数值，~为补码值。
C\'为修改后的校验和，C为修改前的校验和，m为修改前的数值，m\'为修改后的数值，~为补码值。
C代码实现为：
UpdateTTL(iph,n)
struct ip_hdr *ipptr;
unsigned char n;
{
unsigned long sum;
unsigned short old;
struct ip_hdr *ipptr;
unsigned char n;
{
unsigned long sum;
unsigned short old;
old = ntohs(*(unsigned short *)&ipptr->ttl);
ipptr->ttl -= n;
sum = old + (~ntohs(*(unsigned short *)&ipptr->ttl) & 0xffff);
sum += ntohs(ipptr->Checksum);
sum = (sum & 0xffff) + (sum>>16);
ipptr->Checksum = htons(sum + (sum>>16));
}
ipptr->ttl -= n;
sum = old + (~ntohs(*(unsigned short *)&ipptr->ttl) & 0xffff);
sum += ntohs(ipptr->Checksum);
sum = (sum & 0xffff) + (sum>>16);
ipptr->Checksum = htons(sum + (sum>>16));
}
2.3 网络应用
2.3.1 IPv4
IPv4层中的校验和只包括IPv4头部分，不包括上层协议头和应用层数据，校验和是必须计算的。
IPv4层中的校验和只包括IPv4头部分，不包括上层协议头和应用层数据，校验和是必须计算的。
2.3.2 IPv6
IPv6头本身已经不包括校验和字段，只靠上层协议的校验和。
IPv6头本身已经不包括校验和字段，只靠上层协议的校验和。
2.3.3 ICMP/IGMP
ICMP/IGMP校验和计算范围为从ICMP/IGMP开始到数据结束，不包括IP头部分，校验和是必须计算的。
2.3.4 TCP/UDP
TCP/UDP的校验和计算有点特殊，所计算的数据范围除了包括TCP/UDP头开始到数据结束外，还要包括一个IP伪头部分，所谓伪头，只有12字节数据，包括源地址(4字节)、目的地址(4字节)、协议(2字节，第一字节补0)和TCP/UDP包长(2字节)。TCP的校验和是必须的，而UDP的校验和是可选的，如果UDP中校验和字段为0，表示不进行校验和计算，因此对于UDP协议数据的修改后想偷懒的话直接将校验和设为0 就可以了。
2.3.4.1.IP和TCP校验和的计算:
in_cksum(unsigned short *addr, int len)
{
register int nleft = len;
register u_short *w = addr; //u_short 16bit
register int sum = 0;
u_short answer =0;
{
register int nleft = len;
register u_short *w = addr; //u_short 16bit
register int sum = 0;
u_short answer =0;
while (nleft >1)
{
sum += *w++;
nleft -= 2; //16bit=2 bytes
}
if (nleft == 1) //odd时，pad zero
{
*(u_char *)(&answer) = *(u_char *)w;
sum += answer;
}
sum = (sum >>16) + (sum & 0xffff);
sum += (sum >> 16);
answer = ~sum; //求反
return(answer);
}
{
sum += *w++;
nleft -= 2; //16bit=2 bytes
}
if (nleft == 1) //odd时，pad zero
{
*(u_char *)(&answer) = *(u_char *)w;
sum += answer;
}
sum = (sum >>16) + (sum & 0xffff);
sum += (sum >> 16);
answer = ~sum; //求反
return(answer);
}
/* calculate the ip checksum */
send_tcp.ip.check = 0; //先检验和置0
send_tcp.ip.check=in_cksum((unsigned short *)&send_tcp.ip, 20);
send_tcp.ip.check=in_cksum((unsigned short *)&send_tcp.ip, 20);
/* calculate the tcp checksum */
struct pseudo_header //tcp伪头部
{
unsigned int source_address;
unsigned int dest_address;
unsigned char placeholder;
unsigned char protocol;
unsigned short tcp_length; //以上3＊32字节为伪造的tcp首部
struct tcphdr tcp; //TCP头
{
unsigned int source_address;
unsigned int dest_address;
unsigned char placeholder;
unsigned char protocol;
unsigned short tcp_length; //以上3＊32字节为伪造的tcp首部
struct tcphdr tcp; //TCP头
u_char html[bufsize]; //html数据，包括http头和数据
} pseudo_header;
/* set the pseudo header fields */
pseudo_header.source_address = send_tcp.ip.saddr;
pseudo_header.dest_address = send_tcp.ip.daddr;
pseudo_header.placeholder = 0;
pseudo_header.protocol = IPPROTO_TCP;
pseudo_header.tcp_length = htons(20);
bcopy((char *)&send_tcp.tcp, (char *)&pseudo_header.tcp, 20);
} pseudo_header;
/* set the pseudo header fields */
pseudo_header.source_address = send_tcp.ip.saddr;
pseudo_header.dest_address = send_tcp.ip.daddr;
pseudo_header.placeholder = 0;
pseudo_header.protocol = IPPROTO_TCP;
pseudo_header.tcp_length = htons(20);
bcopy((char *)&send_tcp.tcp, (char *)&pseudo_header.tcp, 20);
//将send_tcp的数据拷如pseudo_header中的tcp
bcopy(htmlbuf, (char *)&pseudo_header.html, sizeof(htmlbuf));
send_tcp.tcp.check = in_cksum((unsigned short *)&pseudo_header, sizeof
bcopy(htmlbuf, (char *)&pseudo_header.html, sizeof(htmlbuf));
send_tcp.tcp.check = in_cksum((unsigned short *)&pseudo_header, sizeof
(pseudo_header));
2.3.4.2.UDP校验和计算:
UDP的CHECKSUM算法与IP包的HEADER CHECKSUM的计算方法基本一样，只是取样数据不同。UDP中，参与计算CHEKCSUM的数据包括三部分: 亚头部＋UDP头部＋数据部分亚头部包括：2byte源IP地址＋2byte目的IP地址＋0x00+1byte协议＋２byte的UDP长度UDP包头：２byte源端口＋2byte目的端口＋2byteUDP包长+0x0000(checksum)数据部分
计算方法，以２字节为一个单位，将其顺序相加，就会产生２个字节的SUM，如果超过２字节，则将高位的值再加回低位，然后取补，得到的就是UDP的checksum.
fixCheckSumUDP(struct udphdr * const udp,
struct iphdr const * const ip,
void const * const data)
{
uint32_t sum;
struct
{
struct in_addr src;
struct in_addr dst;
uint8_t mbz;
uint8_t proto;
uint16_t len;
} __attribute__((__packed__)) pseudo_hdr;
struct iphdr const * const ip,
void const * const data)
{
uint32_t sum;
struct
{
struct in_addr src;
struct in_addr dst;
uint8_t mbz;
uint8_t proto;
uint16_t len;
} __attribute__((__packed__)) pseudo_hdr;
pseudo_hdr.src.s_addr = (ip->saddr).s_addr;
pseudo_hdr.dst.s_addr = (ip->daddr).s_addr;
pseudo_hdr.mbz = 0;
pseudo_hdr.proto = ip->protocol;
pseudo_hdr.len = udp->len;
pseudo_hdr.dst.s_addr = (ip->daddr).s_addr;
pseudo_hdr.mbz = 0;
pseudo_hdr.proto = ip->protocol;
pseudo_hdr.len = udp->len;
udp->check = 0;
sum = calculateCheckSum(&pseudo_hdr, sizeof(pseudo_hdr), 0);
sum = calculateCheckSum(udp, sizeof(*udp), sum);
sum = calculateCheckSum(data, ntohs(udp->len)-sizeof(*udp), sum);
sum = ~ntohs(sum);
sum = calculateCheckSum(&pseudo_hdr, sizeof(pseudo_hdr), 0);
sum = calculateCheckSum(udp, sizeof(*udp), sum);
sum = calculateCheckSum(data, ntohs(udp->len)-sizeof(*udp), sum);
sum = ~ntohs(sum);
if (sum==0)
sum=~sum;
udp->check = sum;
}
sum=~sum;
udp->check = sum;
}
3. 32位校验和
3.1 以太帧
以太帧校验和使用的是CRC校验，校验和为4字节32位，算法比较适合硬件实现，其计算和校验都是底层完成的，在IP栈以上时就不用考虑，即使上层直接是构造以太帧发送，也只需构造以太头部即可，发送时由底层自动添加后面的校验和。
3.2 SCTP
在SCTP(协议号：132)协议中，校验和计算比较特殊，采用了和以太包校验和相似的CRC32算法(RFC3309)，计算结果是32位而不再是16位。计算范围为从SCTP头到数据结束，不包括IP伪头。
在SCTP(协议号：132)协议中，校验和计算比较特殊，采用了和以太包校验和相似的CRC32算法(RFC3309)，计算结果是32位而不再是16位。计算范围为从SCTP头到数据结束，不包括IP伪头。
以下是从Linux内核源码SCTP实现中摘取的CRC32算法源码：
/* Example of the crc table file */
#ifndef __crc32cr_table_h__
#define __crc32cr_table_h__
#define CRC32C_POLY 0x1EDC6F41
#define CRC32C(c,d) (c=(c>>8)^crc_c[(c^(d))&0xFF])
static unsigned long crc_c[256] =
{
0x00000000L, 0xF26B8303L, 0xE13B70F7L, 0x1350F3F4L,
0xC79A971FL, 0x35F1141CL, 0x26A1E7E8L, 0xD4CA64EBL,
0x8AD958CFL, 0x78B2DBCCL, 0x6BE22838L, 0x9989AB3BL,
0x4D43CFD0L, 0xBF284CD3L, 0xAC78BF27L, 0x5E133C24L,
0x105EC76FL, 0xE235446CL, 0xF165B798L, 0x030E349BL,
0xD7C45070L, 0x25AFD373L, 0x36FF2087L, 0xC494A384L,
0x9A879FA0L, 0x68EC1CA3L, 0x7BBCEF57L, 0x89D76C54L,
0x5D1D08BFL, 0xAF768BBCL, 0xBC267848L, 0x4E4DFB4BL,
0x20BD8EDEL, 0xD2D60DDDL, 0xC186FE29L, 0x33ED7D2AL,
0xE72719C1L, 0x154C9AC2L, 0x061C6936L, 0xF477EA35L,
0xAA64D611L, 0x580F5512L, 0x4B5FA6E6L, 0xB93425E5L,
0x6DFE410EL, 0x9F95C20DL, 0x8CC531F9L, 0x7EAEB2FAL,
0x30E349B1L, 0xC288CAB2L, 0xD1D83946L, 0x23B3BA45L,
0xF779DEAEL, 0x05125DADL, 0x1642AE59L, 0xE4292D5AL,
0xBA3A117EL, 0x4851927DL, 0x5B016189L, 0xA96AE28AL,
0x7DA08661L, 0x8FCB0562L, 0x9C9BF696L, 0x6EF07595L,
0x417B1DBCL, 0xB3109EBFL, 0xA0406D4BL, 0x522BEE48L,
0x86E18AA3L, 0x748A09A0L, 0x67DAFA54L, 0x95B17957L,
0xCBA24573L, 0x39C9C670L, 0x2A993584L, 0xD8F2B687L,
0x0C38D26CL, 0xFE53516FL, 0xED03A29BL, 0x1F682198L,
0x5125DAD3L, 0xA34E59D0L, 0xB01EAA24L, 0x42752927L,
0x96BF4DCCL, 0x64D4CECFL, 0x77843D3BL, 0x85EFBE38L,
0xDBFC821CL, 0x2997011FL, 0x3AC7F2EBL, 0xC8AC71E8L,
0x1C661503L, 0xEE0D9600L, 0xFD5D65F4L, 0x0F36E6F7L,
0x61C69362L, 0x93AD1061L, 0x80FDE395L, 0x72966096L,
0xA65C047DL, 0x5437877EL, 0x4767748AL, 0xB50CF789L,
0xEB1FCBADL, 0x197448AEL, 0x0A24BB5AL, 0xF84F3859L,
0x2C855CB2L, 0xDEEEDFB1L, 0xCDBE2C45L, 0x3FD5AF46L,
0x7198540DL, 0x83F3D70EL, 0x90A324FAL, 0x62C8A7F9L,
0xB602C312L, 0x44694011L, 0x5739B3E5L, 0xA55230E6L,
0xFB410CC2L, 0x092A8FC1L, 0x1A7A7C35L, 0xE811FF36L,
0x3CDB9BDDL, 0xCEB018DEL, 0xDDE0EB2AL, 0x2F8B6829L,
0x82F63B78L, 0x709DB87BL, 0x63CD4B8FL, 0x91A6C88CL,
0x456CAC67L, 0xB7072F64L, 0xA457DC90L, 0x563C5F93L,
0x082F63B7L, 0xFA44E0B4L, 0xE9141340L, 0x1B7F9043L,
0xCFB5F4A8L, 0x3DDE77ABL, 0x2E8E845FL, 0xDCE5075CL,
0x92A8FC17L, 0x60C37F14L, 0x73938CE0L, 0x81F80FE3L,
0x55326B08L, 0xA759E80BL, 0xB4091BFFL, 0x466298FCL,
0x1871A4D8L, 0xEA1A27DBL, 0xF94AD42FL, 0x0B21572CL,
0xDFEB33C7L, 0x2D80B0C4L, 0x3ED04330L, 0xCCBBC033L,
0xA24BB5A6L, 0x502036A5L, 0x4370C551L, 0xB11B4652L,
0x65D122B9L, 0x97BAA1BAL, 0x84EA524EL, 0x7681D14DL,
0x2892ED69L, 0xDAF96E6AL, 0xC9A99D9EL, 0x3BC21E9DL,
0xEF087A76L, 0x1D63F975L, 0x0E330A81L, 0xFC588982L,
0xB21572C9L, 0x407EF1CAL, 0x532E023EL, 0xA145813DL,
0x758FE5D6L, 0x87E466D5L, 0x94B49521L, 0x66DF1622L,
0x38CC2A06L, 0xCAA7A905L, 0xD9F75AF1L, 0x2B9CD9F2L,
0xFF56BD19L, 0x0D3D3E1AL, 0x1E6DCDEEL, 0xEC064EEDL,
0xC38D26C4L, 0x31E6A5C7L, 0x22B65633L, 0xD0DDD530L,
0x0417B1DBL, 0xF67C32D8L, 0xE52CC12CL, 0x1747422FL,
0x49547E0BL, 0xBB3FFD08L, 0xA86F0EFCL, 0x5A048DFFL,
0x8ECEE914L, 0x7CA56A17L, 0x6FF599E3L, 0x9D9E1AE0L,
0xD3D3E1ABL, 0x21B862A8L, 0x32E8915CL, 0xC083125FL,
0x144976B4L, 0xE622F5B7L, 0xF5720643L, 0x07198540L,
0x590AB964L, 0xAB613A67L, 0xB831C993L, 0x4A5A4A90L,
0x9E902E7BL, 0x6CFBAD78L, 0x7FAB5E8CL, 0x8DC0DD8FL,
0xE330A81AL, 0x115B2B19L, 0x020BD8EDL, 0xF0605BEEL,
0x24AA3F05L, 0xD6C1BC06L, 0xC5914FF2L, 0x37FACCF1L,
0x69E9F0D5L, 0x9B8273D6L, 0x88D28022L, 0x7AB90321L,
0xAE7367CAL, 0x5C18E4C9L, 0x4F48173DL, 0xBD23943EL,
0xF36E6F75L, 0x0105EC76L, 0x12551F82L, 0xE03E9C81L,
0x34F4F86AL, 0xC69F7B69L, 0xD5CF889DL, 0x27A40B9EL,
0x79B737BAL, 0x8BDCB4B9L, 0x988C474DL, 0x6AE7C44EL,
0xBE2DA0A5L, 0x4C4623A6L, 0x5F16D052L, 0xAD7D5351L,
};
#endif
u_int32_t
crc32c(unsigned char *buffer, unsigned int length)#ifndef __crc32cr_table_h__
#define __crc32cr_table_h__
#define CRC32C_POLY 0x1EDC6F41
#define CRC32C(c,d) (c=(c>>8)^crc_c[(c^(d))&0xFF])
static unsigned long crc_c[256] =
{
0x00000000L, 0xF26B8303L, 0xE13B70F7L, 0x1350F3F4L,
0xC79A971FL, 0x35F1141CL, 0x26A1E7E8L, 0xD4CA64EBL,
0x8AD958CFL, 0x78B2DBCCL, 0x6BE22838L, 0x9989AB3BL,
0x4D43CFD0L, 0xBF284CD3L, 0xAC78BF27L, 0x5E133C24L,
0x105EC76FL, 0xE235446CL, 0xF165B798L, 0x030E349BL,
0xD7C45070L, 0x25AFD373L, 0x36FF2087L, 0xC494A384L,
0x9A879FA0L, 0x68EC1CA3L, 0x7BBCEF57L, 0x89D76C54L,
0x5D1D08BFL, 0xAF768BBCL, 0xBC267848L, 0x4E4DFB4BL,
0x20BD8EDEL, 0xD2D60DDDL, 0xC186FE29L, 0x33ED7D2AL,
0xE72719C1L, 0x154C9AC2L, 0x061C6936L, 0xF477EA35L,
0xAA64D611L, 0x580F5512L, 0x4B5FA6E6L, 0xB93425E5L,
0x6DFE410EL, 0x9F95C20DL, 0x8CC531F9L, 0x7EAEB2FAL,
0x30E349B1L, 0xC288CAB2L, 0xD1D83946L, 0x23B3BA45L,
0xF779DEAEL, 0x05125DADL, 0x1642AE59L, 0xE4292D5AL,
0xBA3A117EL, 0x4851927DL, 0x5B016189L, 0xA96AE28AL,
0x7DA08661L, 0x8FCB0562L, 0x9C9BF696L, 0x6EF07595L,
0x417B1DBCL, 0xB3109EBFL, 0xA0406D4BL, 0x522BEE48L,
0x86E18AA3L, 0x748A09A0L, 0x67DAFA54L, 0x95B17957L,
0xCBA24573L, 0x39C9C670L, 0x2A993584L, 0xD8F2B687L,
0x0C38D26CL, 0xFE53516FL, 0xED03A29BL, 0x1F682198L,
0x5125DAD3L, 0xA34E59D0L, 0xB01EAA24L, 0x42752927L,
0x96BF4DCCL, 0x64D4CECFL, 0x77843D3BL, 0x85EFBE38L,
0xDBFC821CL, 0x2997011FL, 0x3AC7F2EBL, 0xC8AC71E8L,
0x1C661503L, 0xEE0D9600L, 0xFD5D65F4L, 0x0F36E6F7L,
0x61C69362L, 0x93AD1061L, 0x80FDE395L, 0x72966096L,
0xA65C047DL, 0x5437877EL, 0x4767748AL, 0xB50CF789L,
0xEB1FCBADL, 0x197448AEL, 0x0A24BB5AL, 0xF84F3859L,
0x2C855CB2L, 0xDEEEDFB1L, 0xCDBE2C45L, 0x3FD5AF46L,
0x7198540DL, 0x83F3D70EL, 0x90A324FAL, 0x62C8A7F9L,
0xB602C312L, 0x44694011L, 0x5739B3E5L, 0xA55230E6L,
0xFB410CC2L, 0x092A8FC1L, 0x1A7A7C35L, 0xE811FF36L,
0x3CDB9BDDL, 0xCEB018DEL, 0xDDE0EB2AL, 0x2F8B6829L,
0x82F63B78L, 0x709DB87BL, 0x63CD4B8FL, 0x91A6C88CL,
0x456CAC67L, 0xB7072F64L, 0xA457DC90L, 0x563C5F93L,
0x082F63B7L, 0xFA44E0B4L, 0xE9141340L, 0x1B7F9043L,
0xCFB5F4A8L, 0x3DDE77ABL, 0x2E8E845FL, 0xDCE5075CL,
0x92A8FC17L, 0x60C37F14L, 0x73938CE0L, 0x81F80FE3L,
0x55326B08L, 0xA759E80BL, 0xB4091BFFL, 0x466298FCL,
0x1871A4D8L, 0xEA1A27DBL, 0xF94AD42FL, 0x0B21572CL,
0xDFEB33C7L, 0x2D80B0C4L, 0x3ED04330L, 0xCCBBC033L,
0xA24BB5A6L, 0x502036A5L, 0x4370C551L, 0xB11B4652L,
0x65D122B9L, 0x97BAA1BAL, 0x84EA524EL, 0x7681D14DL,
0x2892ED69L, 0xDAF96E6AL, 0xC9A99D9EL, 0x3BC21E9DL,
0xEF087A76L, 0x1D63F975L, 0x0E330A81L, 0xFC588982L,
0xB21572C9L, 0x407EF1CAL, 0x532E023EL, 0xA145813DL,
0x758FE5D6L, 0x87E466D5L, 0x94B49521L, 0x66DF1622L,
0x38CC2A06L, 0xCAA7A905L, 0xD9F75AF1L, 0x2B9CD9F2L,
0xFF56BD19L, 0x0D3D3E1AL, 0x1E6DCDEEL, 0xEC064EEDL,
0xC38D26C4L, 0x31E6A5C7L, 0x22B65633L, 0xD0DDD530L,
0x0417B1DBL, 0xF67C32D8L, 0xE52CC12CL, 0x1747422FL,
0x49547E0BL, 0xBB3FFD08L, 0xA86F0EFCL, 0x5A048DFFL,
0x8ECEE914L, 0x7CA56A17L, 0x6FF599E3L, 0x9D9E1AE0L,
0xD3D3E1ABL, 0x21B862A8L, 0x32E8915CL, 0xC083125FL,
0x144976B4L, 0xE622F5B7L, 0xF5720643L, 0x07198540L,
0x590AB964L, 0xAB613A67L, 0xB831C993L, 0x4A5A4A90L,
0x9E902E7BL, 0x6CFBAD78L, 0x7FAB5E8CL, 0x8DC0DD8FL,
0xE330A81AL, 0x115B2B19L, 0x020BD8EDL, 0xF0605BEEL,
0x24AA3F05L, 0xD6C1BC06L, 0xC5914FF2L, 0x37FACCF1L,
0x69E9F0D5L, 0x9B8273D6L, 0x88D28022L, 0x7AB90321L,
0xAE7367CAL, 0x5C18E4C9L, 0x4F48173DL, 0xBD23943EL,
0xF36E6F75L, 0x0105EC76L, 0x12551F82L, 0xE03E9C81L,
0x34F4F86AL, 0xC69F7B69L, 0xD5CF889DL, 0x27A40B9EL,
0x79B737BAL, 0x8BDCB4B9L, 0x988C474DL, 0x6AE7C44EL,
0xBE2DA0A5L, 0x4C4623A6L, 0x5F16D052L, 0xAD7D5351L,
};
#endif
u_int32_t
{
unsigned int i;
unsigned long crc32 = ~0L;
unsigned long result;
unsigned char byte0,byte1,byte2,byte3;
for (i = 0; i < length; i++){
CRC32C(crc32, buffer[i]);
}
result = ~crc32;
/* result now holds the negated polynomial remainder;
* since the table and algorithm is "reflected" [williams95].
* That is, result has the same value as if we mapped the message
* to a polynomial, computed the host-bit-order polynomial
* remainder, performed final negation, then did an end-for-end
* bit-reversal.
* Note that a 32-bit bit-reversal is identical to four inplace
* 8-bit reversals followed by an end-for-end byteswap.
* In other words, the bytes of each bit are in the right order,
* but the bytes have been byteswapped. So we now do an explicit
* byteswap. On a little-endian machine, this byteswap and
* the final ntohl cancel out and could be elided.
*/
byte0 = result & 0xff;
byte1 = (result>>8) & 0xff;
byte2 = (result>>16) & 0xff;
byte3 = (result>>24) & 0xff;
crc32 = ((byte0 << 24) |
(byte1 << 16) |
(byte2 << 8) |
byte3);
return ( crc32 );
}
4. 结论
Linux内核网络编程中经常会遇到重新计算校验和的问题，这个基本功一定是要掌握的，其实内核中已经提供了大量的校验和计算函数供使用，要尽量使用这些已有函数而不必自己重新编写。
Linux内核网络编程中经常会遇到重新计算校验和的问题，这个基本功一定是要掌握的，其实内核中已经提供了大量的校验和计算函数供使用，要尽量使用这些已有函数而不必自己重新编写。