运行#Python与#python -V，看到版本是2.4.3，非常老了，并且之前写的都是跑在python3.X上面的，3.X和2.X有非常多不同，
有兴趣的朋友能够參考下这篇文章：
http://www.jb51.net/article/34011.htm
更新python千万不要把老版本号的删除！新老版本号是能够共存的，非常多主要的命令、
软件包都要依赖预装的老版本号python的，比方yum。
一、升级到2.7.3
1. 升级安装
首先下载源tar包
可利用linux自带下载工具wget下载，例如以下所看到的：
# wget http://www.python.org/ftp/python/2.7.3/Python-2.7.3.tar.gz
下载完毕后到下载文件夹下，解压
# tar -zxvf Python-2.7.3.tar.gz
进入解压缩后的目录
cd Python-2.7.3
在编译前先在/usr/local建一个目录python2.7.3（作为python的安装路径，以免覆盖老的版本号）
# mkdir /usr/local/python2.7.3
在解压缩后的文件夹下编译安装
# ./configure --prefix=/usr/local/python2.7.3
# make
# make install
此时没有覆盖老版本号，再将原来/usr/bin/python链接改为别的名字
# mv /usr/bin/python /usr/bin/python_old
再建立新版本号python的链接
# ln -s /usr/local/python2.7.3/bin/python2.7 /usr/bin/python
这个时候输入
# python
就会显示出python的新版本号信息
view sourceprint?
Python 2.7.3 (default, Sep 29 2013, 11:05:02)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-54)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>>
2.执行程序时出现错误:
File "~/PythonInstall/lib/python2.7/multiprocessing/process.py", line 129, in start
from .forking import Popen
File "~/PythonInstall/lib/python2.7/multiprocessing/forking.py", line 58, in <module>
from pickle import Pickler
File "~/PythonInstall/lib/python2.7/pickle.py", line 1266, in <module>
import binascii as _binascii
ImportError: No module named binascii
是由于升级python版本号不正常导致的。
回到源文件文件夹:
# cd .../Python-2.7.3
[Python-2.7.3]# make -s
building dbm using gdbm
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_set_result\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: (Each undeclared identifier is
reported only once
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: for each function it appears in.)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: expected \')\' before
\'PyInt_AsLong\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_build_py_params\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: expected \';\' before \'val_int\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:596: error: \'val_int\' undeclared (first use in this function)
/usr/bin/ld: /usr/local/lib/libz.a(adler32.o): relocation R_X86_64_32 against `a local symbol\' can not be used when
making a shared object; recompile with -fPIC
/usr/local/lib/libz.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
/usr/bin/ld: /usr/local/lib/libz.a(crc32.o): relocation R_X86_64_32 against `a local symbol\' can not be used when
making a shared object; recompile with -fPIC
/usr/local/lib/libz.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
Python build finished, but the necessary bits to build these modules were not found:
_tkinter bsddb185 dl
imageop sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module\'s name.
Failed to build these modules:
_sqlite3 binascii zlib
升级安装zlib
# wget http://sourceforge.net/projects/libpng/files/zlib/1.2.8/zlib-1.2.8.tar.gz
# tar -zxvf zlib-1.2.8.tar.gz
# cd zlib-1.2.8
# ./configure
# make install
# cd ../Python-2.7.3
# make -s
building dbm using gdbm
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_set_result\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: (Each undeclared identifier is reported only once
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: for each function it appears in.)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: expected \')\' before
\'PyInt_AsLong\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_build_py_params\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: expected \';\' before \'val_int\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:596: error: \'val_int\' undeclared (first use in this function)
Python build finished, but the necessary bits to build these modules were not found:
_tkinter bsddb185 dl
imageop sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module\'s name.
Failed to build these modules:
_sqlite3
升级安装sqlite3
# cd ..
# wget http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz
# tar -zxvf sqlite-autoconf-3080500.tar.gz
# cd sqlite-autoconf-3080500
# ./configure
# make
# make install
# cd ..
# cd python-2.7.3
# make -s
building dbm using gdbm
Python build finished, but the necessary bits to build these modules were not found:
_tkinter bsddb185 dl
imageop sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module\'s name.
# make clean
# make all
# make install
到此，程序就能正常执行了；
二、升级到3.3.0
更新python：
第1步：更新gcc，
由于gcc版本号太老会导致新版本号python包编译不成功 代码例如以下:
#yum -y install gcc
系统会自己主动下载并安装或更新，等它自己结束
第2步：下载Python-3.3.0软件包
代码例如以下:
# wget --no-check-certificate http://python.org/ftp/python/3.3.0/Python-3.3.0.tar.bz2
注意：依照上述命令下载的软件包会存放在你当前的工作文件夹下，
wget命令是一个从网络上自己主动下载文件的*工具，详细使用方法，
请參考这篇文章：http://www.jb51.net/os/RedHat/73089.html
说明：命令中的数字就是版本号号，你也能够把3.3.0换成你须要的版本号.
第3步：解压已下载的二进制包并编译安装
代码例如以下:
#tar -jxvf Python-3.3.0.tar.bz2
#cd Python-3.3.0
#./configure
#make all
#make install
#make clean
#make distclean
# /usr/local/bin/python3 –V
编译安装完成以后，能够输入上面一行命令，查看版本号
第4步：建立软连接指向到当前系统默认python命令的bin文件夹，让系统使用新版本号python
#mv /usr/bin/python /usr/bin/python2.4 //当前python的版本号为2.4所以是python2.4
#ln -s /usr/local/bin/python3.3 /usr/bin/python
输入
#python -V，
就可以查看当前默认python版本号
默认的python成功指向3.3.0以后，yum不能正常使用，须要改动yum的配置文件
第5步：改动yum配置文件
#vi /usr/bin/yum
把文件头部的
#!/usr/bin/python 改成 #!/usr/bin/python2.4 //改为之前的老版本
保存退出，yum就可以正常使用。
如若有其它命令、软件不能正常使用，仿照yum配置文件的改动方法，改动其配置文件就可以。
至此，更新完成。
有兴趣的朋友能够參考下这篇文章：
http://www.jb51.net/article/34011.htm
更新python千万不要把老版本号的删除！新老版本号是能够共存的，非常多主要的命令、
软件包都要依赖预装的老版本号python的，比方yum。
一、升级到2.7.3
1. 升级安装
首先下载源tar包
可利用linux自带下载工具wget下载，例如以下所看到的：
# wget http://www.python.org/ftp/python/2.7.3/Python-2.7.3.tar.gz
下载完毕后到下载文件夹下，解压
# tar -zxvf Python-2.7.3.tar.gz
进入解压缩后的目录
cd Python-2.7.3
在编译前先在/usr/local建一个目录python2.7.3（作为python的安装路径，以免覆盖老的版本号）
# mkdir /usr/local/python2.7.3
在解压缩后的文件夹下编译安装
# ./configure --prefix=/usr/local/python2.7.3
# make
# make install
此时没有覆盖老版本号，再将原来/usr/bin/python链接改为别的名字
# mv /usr/bin/python /usr/bin/python_old
再建立新版本号python的链接
# ln -s /usr/local/python2.7.3/bin/python2.7 /usr/bin/python
这个时候输入
# python
就会显示出python的新版本号信息
view sourceprint?
Python 2.7.3 (default, Sep 29 2013, 11:05:02)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-54)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>>
2.执行程序时出现错误:
File "~/PythonInstall/lib/python2.7/multiprocessing/process.py", line 129, in start
from .forking import Popen
File "~/PythonInstall/lib/python2.7/multiprocessing/forking.py", line 58, in <module>
from pickle import Pickler
File "~/PythonInstall/lib/python2.7/pickle.py", line 1266, in <module>
import binascii as _binascii
ImportError: No module named binascii
是由于升级python版本号不正常导致的。
回到源文件文件夹:
# cd .../Python-2.7.3
[Python-2.7.3]# make -s
building dbm using gdbm
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_set_result\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: (Each undeclared identifier is
reported only once
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: for each function it appears in.)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: expected \')\' before
\'PyInt_AsLong\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_build_py_params\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: expected \';\' before \'val_int\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:596: error: \'val_int\' undeclared (first use in this function)
/usr/bin/ld: /usr/local/lib/libz.a(adler32.o): relocation R_X86_64_32 against `a local symbol\' can not be used when
making a shared object; recompile with -fPIC
/usr/local/lib/libz.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
/usr/bin/ld: /usr/local/lib/libz.a(crc32.o): relocation R_X86_64_32 against `a local symbol\' can not be used when
making a shared object; recompile with -fPIC
/usr/local/lib/libz.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
Python build finished, but the necessary bits to build these modules were not found:
_tkinter bsddb185 dl
imageop sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module\'s name.
Failed to build these modules:
_sqlite3 binascii zlib
升级安装zlib
# wget http://sourceforge.net/projects/libpng/files/zlib/1.2.8/zlib-1.2.8.tar.gz
# tar -zxvf zlib-1.2.8.tar.gz
# cd zlib-1.2.8
# ./configure
# make install
# cd ../Python-2.7.3
# make -s
building dbm using gdbm
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_set_result\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: (Each undeclared identifier is reported only once
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: for each function it appears in.)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:552: error: expected \')\' before
\'PyInt_AsLong\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c: In function \'_pysqlite_build_py_params\':
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: \'sqlite3_int64\' undeclared
(first use in this function)
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:583: error: expected \';\' before \'val_int\'
/opt/PJT_python/python-2.7.3/Python-2.7.3/Modules/_sqlite/connection.c:596: error: \'val_int\' undeclared (first use in this function)
Python build finished, but the necessary bits to build these modules were not found:
_tkinter bsddb185 dl
imageop sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module\'s name.
Failed to build these modules:
_sqlite3
升级安装sqlite3
# cd ..
# wget http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz
# tar -zxvf sqlite-autoconf-3080500.tar.gz
# cd sqlite-autoconf-3080500
# ./configure
# make
# make install
# cd ..
# cd python-2.7.3
# make -s
building dbm using gdbm
Python build finished, but the necessary bits to build these modules were not found:
_tkinter bsddb185 dl
imageop sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module\'s name.
# make clean
# make all
# make install
到此，程序就能正常执行了；
二、升级到3.3.0
更新python：
第1步：更新gcc，
由于gcc版本号太老会导致新版本号python包编译不成功 代码例如以下:
#yum -y install gcc
系统会自己主动下载并安装或更新，等它自己结束
第2步：下载Python-3.3.0软件包
代码例如以下:
# wget --no-check-certificate http://python.org/ftp/python/3.3.0/Python-3.3.0.tar.bz2
注意：依照上述命令下载的软件包会存放在你当前的工作文件夹下，
wget命令是一个从网络上自己主动下载文件的*工具，详细使用方法，
请參考这篇文章：http://www.jb51.net/os/RedHat/73089.html
说明：命令中的数字就是版本号号，你也能够把3.3.0换成你须要的版本号.
第3步：解压已下载的二进制包并编译安装
代码例如以下:
#tar -jxvf Python-3.3.0.tar.bz2
#cd Python-3.3.0
#./configure
#make all
#make install
#make clean
#make distclean
# /usr/local/bin/python3 –V
编译安装完成以后，能够输入上面一行命令，查看版本号
第4步：建立软连接指向到当前系统默认python命令的bin文件夹，让系统使用新版本号python
#mv /usr/bin/python /usr/bin/python2.4 //当前python的版本号为2.4所以是python2.4
#ln -s /usr/local/bin/python3.3 /usr/bin/python
输入
#python -V，
就可以查看当前默认python版本号
默认的python成功指向3.3.0以后，yum不能正常使用，须要改动yum的配置文件
第5步：改动yum配置文件
#vi /usr/bin/yum
把文件头部的
#!/usr/bin/python 改成 #!/usr/bin/python2.4 //改为之前的老版本
保存退出，yum就可以正常使用。
如若有其它命令、软件不能正常使用，仿照yum配置文件的改动方法，改动其配置文件就可以。
至此，更新完成。
