特别提示:仅用于攻防演练及教学测试用途,禁止非法使用
Hyenae
是在windows平台上非常好用的一款ddos攻击工具,可以完成绝大多数的攻击操作。
download
Features
- ARP-Request flooding
- ARP-Cache poisoning
- PPPoE session initiation flooding
- Blind PPPoE session termination
- ICMP-Echo flooding
- ICMP-Smurf attack
- ICMP based TCP-Connection reset
- TCP-SYN flooding
- TCP-Land attack
- Blind TCP-Connection reset
- UDP flooding
- DNS-Query flooding
- DHCP-Discover flooding
- DHCP starvation attack
- DHCP-Release forcing
- Cisco HSRP active router hijacking
- Pattern based packet address configuration
- Intelligent address and address protocol detection
- Smart wildcard-based randomization
- Daemon for setting up remote attack networks – HyenaeFE QT-Frontend support
interface
鬣狗界面
hyenae的界面比较简单,图中展示的是SYN/ACK洪泛攻击的配置选项。
- Network Protocol中可以选择攻击方式对应的网络协议,如SYN洪泛攻击对应传输层的TCP,IP协议可选IPv4, IPv6
- 攻击源的IP,MAC地址以及端口号可以非常灵活的设置,按MAC-IP@port的格式书写,如图中的攻击源匹配模式%-172.17.14.158@80
- % 代表任意,在此处代表任意的MAC地址
- 172.17.14.158为伪造的攻击源IP,可以修改为任意的合法IP
- 80为端口号,80同时也是网络服务器的默认端口
- 攻击目标的设置方式与攻击源一致,图中的%-172.17.14.10@80
- % 随机生成MAC地址
- 172.17.14.10代表被攻击的IP
- 80为攻击目标的被攻击端口号
- 针对TCP协议,右侧给出其对应的5个常见flags: FIN, SYN, RST, PSH, ACK
- 可以随意进行单选或多选,以实现不同的攻击方式
- 随意的组合可以产生正常通信过程中无法出现的数据包
- 软件下方可以设置数据包的发送速率,默认为无限速发送,这会暂用大量带宽,导致网络拥塞;当然啦,这个软件本就是为了攻击网络,导致网络瘫痪正是其目的所在
简单说,这幅图的作用是产生MAC地址随机,IP为172.17.14.158,端口为80的伪造源,去攻击目的MAC随机,IP为172.17.14.10的web server。
由于目的MAC随机,当MAC地址首字节为奇数时,生成的数据包为广播包,此时将产生广播风暴,局域网内的所有设备都将收到大量的广播包,当速率很高时,很容易导致局域网瘫痪,这是需要注意的。本人当时年少轻狂,有次测试,使用全速率的广播式SYN/ACK
攻击,直接导致部门的局域网瘫痪断网,幸好是晚上,后来找人重置了部门内的网络设备才恢复,想想真是罪过啊。
Use cases
- Land Attack
- src: %-172.17.14.94@53
- des: %-172.17.14.94@80
1
2
3
4
|
DoS *** 3118 *** {Land Attack} are suppressed!
[DoS Attack: Land Attack] from source: 172.17.14.94, port 53,
[DoS Attack: Land Attack] from source: 172.17.14.94, port 53,
[DoS Attack: Land Attack] from source: 172.17.14.94, port 53,
|
- SYN/ACK scan (TCP SYN ACK)
- src: %-172.17.14.8@80
- des: %-172.17.14.94@80
1
2
3
4
|
DoS *** 3896 *** {SYN/ACK Scan} are suppressed!
[DoS Attack: SYN/ACK Scan] from source: 172.17.14.8, port 80,
[DoS Attack: SYN/ACK Scan] from source: 172.17.14.8, port 80,
[DoS Attack: SYN/ACK Scan] from source: 172.17.14.8, port 80,
|
- ping flood (icmp echo)
- src: %-172.17.14.8
- des: %-172.17.14.94
1
2
3
4
|
DoS *** 1881 *** {Ping Flood} are suppressed!
[DoS Attack: Ping Flood] from source: 172.17.14.8,
[DoS Attack: Ping Flood] from source: 172.17.14.8,
[DoS Attack: Ping Flood] from source: 172.17.14.8,
|
1
2
3
4
|
DoS *** 1719 *** {Ping Sweep} are suppressed!
[DoS Attack: Ping Sweep] from source: 188.167.1.1,
[DoS Attack: Ping Sweep] from source: 113.172.1.5,
[DoS Attack: Ping Sweep] from source: 175.181.2.6,
|
- RST Scan(TCP RST)
- src: %-172.17.14.8@80
- des: %-172.17.14.94@80
1
2
3
4
|
DoS *** 4023 *** {RST Scan} are suppressed!
[DoS Attack: RST Scan] from source: 172.17.14.8, port 80,
[DoS Attack: RST Scan] from source: 172.17.14.8, port 80,
[DoS Attack: RST Scan] from source: 172.17.14.8, port 80,
|
- ACK scan (TCP ACK)
- src: %-172.17.14.8@80
- des: %-172.17.14.94@80
1
2
3
4
|
DoS *** 3989 *** {ACK Scan} are suppressed!
[DoS Attack: ACK Scan] from source: 172.17.14.8, port 80,
[DoS Attack: ACK Scan] from source: 172.17.14.8, port 80,
[DoS Attack: ACK Scan] from source: 172.17.14.8, port 80
|
- FIN scan(TCP FIN)
- src: %-172.17.14.8@80
- des: %-172.17.14.94@80
1
2
3
4
|
DoS *** 3009 *** {FIN Scan} are suppressed!
[DoS Attack: FIN Scan] from source: 172.17.14.8, port 80,
[DoS Attack: FIN Scan] from source: 172.17.14.8, port 80,
[DoS Attack: FIN Scan] from source: 172.17.14.8, port 80,
|
hping3
用于生成和解析TCPIP协议数据包的开源工具
hping3同样可用于产生ddos攻击包,但与hyenae不同的是,hping3无法手动设置MAC地址,而是根据IP地址自动获取
需要注意的是,如果使用搬瓦工购买的vps向公网IP执行hping3攻击的话,最好不要尝试,如果要用也一定记得限速,否则就会被警告并关停,当然你有3次机会重置
vps警告
examples
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
|
|
reference