案例一：单纯地对某些ip进行ping监控
[root@test opt]# cat /opt/hosts_ip_list
192.168.10.10
192.168.10.11
192.168.10.12
192.168.10.13
192.168.10.14
192.168.10.15
192.168.10.16
192.168.10.17
[root@test opt]# cat /opt/hosts_ip_monit.sh
#!/bin/bash
for ip in $(cat /opt/hosts_ip_list)
do
ping -c 1 $ip &>/dev/null #ping 3次，当3次ping都失败时，则判定此ip网络通信失败。
a=$?
sleep 2
ping -c 1 $ip &>/dev/null
b=$?
sleep 2
ping -c 1 $ip &>/dev/null
c=$?
sleep 2
DATE=$(date +%F" "%H:%M)
if [ $a -ne 0 -a $b -ne 0 -a $c -ne 0 ];then
echo -e "Date : $DATE\nHost : $ip\nProblem : Ping is failed."
/bin/sed -i 's/^'$ip'/'#$ip'/g' /etc/hosts
else
echo "$ip ping is successful."
/bin/sed -i 's/^'#$ip'/'$ip'/g' /etc/hosts
fi
done
[root@test opt]# chmod 755 /opt/hosts_ip_monit.sh
[root@test opt]# sh /opt/hosts_ip_monit.sh
Date : 2018-04-24 15:49
Host : 192.168.10.10
Problem : Ping is failed.
Date : 2018-04-24 15:50
Host : 192.168.10.11
Problem : Ping is failed.
192.168.10.12 ping is successful.
192.168.10.13 ping is successful.
192.168.10.14 ping is successful.
192.168.10.15 ping is successful.
192.168.10.16 ping is successful.
Date : 2018-04-24 15:51
Host : 192.168.10.17
Problem : Ping is failed.
案例二：对/etc/hosts列表里的ip映射关系进行ping监控报警
测试系统服务器需要访问域名www.test.com，该域名解析的DNS地址有很多个，需要在测试系统服务器上的做host绑定。在/etc/hosts文件了做了www.test.com域名的很多绑定，
在域名解析时，会从host绑定配置里从上到下匹配，如果上面绑定的ip不通，则域名解析就会失败，不会主动去解析到下一个绑定的地址，除非将这个不通的ip绑定注释掉或删除掉。
现在要求：
当/etc/hosts文件里绑定的ip出现故障，ping不通的时候，将该ip的绑定自动注释，并发出邮件报警；如果该ip恢复了正常通信，将自动打开该ip的绑定设置。
[root@cx-app01 ~]# cat /etc/hosts
#192.168.10.10 www.test.com
#192.168.10.11 www.test.com
192.168.10.12 www.test.com
192.168.10.13 www.test.com
192.168.10.14 www.test.com
192.168.10.15 www.test.com
192.168.10.16 www.test.com
#192.168.10.17 www.test.com
[root@cx-app01 ~]# ping www.test.com
PING www.test.com (192.168.10.12) 56(84) bytes of data.
64 bytes from www.test.com (192.168.10.12): icmp_seq=1 ttl=50 time=31.1 ms
64 bytes from www.test.com (192.168.10.12): icmp_seq=2 ttl=50 time=30.7 ms
64 bytes from www.test.com (192.168.10.12): icmp_seq=3 ttl=50 time=30.8 ms
.......
[root@cx-app01 ~]# cat /opt/hosts_ip_list
192.168.10.10
192.168.10.11
192.168.10.12
192.168.10.13
192.168.10.14
192.168.10.15
192.168.10.16
192.168.10.17
[root@cx-app01 ~]# cat /opt/hosts_ip_monit.sh
#!/bin/bash
for ip in $(cat /opt/hosts_ip_list)
do
ping -c 1 $ip &>/dev/null
a=$?
sleep 2
ping -c 1 $ip &>/dev/null
b=$?
sleep 2
ping -c 1 $ip &>/dev/null
c=$?
sleep 2
DATE=$(date +%F" "%H:%M)
if [ $a -ne 0 -a $b -ne 0 -a $c -ne 0 ];then
echo -e "Date : $DATE\nHost : $ip\nProblem : Ping is failed."
cat /etc/hosts|grep "^#$ip"
d=$?
if [ $d -ne 0 ];then
/bin/bash /opt/sendemail.sh zhangsan@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip连接失败，现已在/etc/hosts文件里注释掉该ip的映射关系"
/bin/bash /opt/sendemail.sh lisi@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip连接失败，现已在/etc/hosts文件里注释掉该ip的映射关系"
/bin/bash /opt/sendemail.sh liuwu@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip连接失败，现已在/etc/hosts文件里注释掉该ip的映射关系"
/bin/sed -i 's/^'$ip'/'#$ip'/g' /etc/hosts
else
echo "$ip is not conneted，and it has been done"
fi
else
echo "$ip ping is successful."
cat /etc/hosts|grep "^#$ip"
f=$?
if [ $f -eq 0 ];then
/bin/bash /opt/sendemail.sh zhangsan@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip连接成功，现已在/etc/hosts文件里恢复该ip的映射关系"
/bin/bash /opt/sendemail.sh lisi@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip连接成功，现已在/etc/hosts文件里恢复该ip的映射关系"
/bin/bash /opt/sendemail.sh liuwu@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip连接成功，现已在/etc/hosts文件里恢复该ip的映射关系"
/bin/sed -i 's/^'#$ip'/'$ip'/g' /etc/hosts
else
echo "$ip connection has been restored"
fi
fi
done
采用sendemail进行邮件告警发送，sendemail部署参考：http://www.cnblogs.com/kevingrace/p/5961861.html
[root@cx-app01 ~]# cat /opt/sendemail.sh
#!/bin/bash
# Filename: SendEmail.sh
# Notes: 使用sendEmail
#
# 脚本的日志文件
LOGFILE="/tmp/Email.log"
:>"$LOGFILE"
exec 1>"$LOGFILE"
exec 2>&1
SMTP_server='smtp.test.com'
username='monit@test.com'
password='monit@123'
from_email_address='monit@test.com'
to_email_address="$1"
message_subject_utf8="$2"
message_body_utf8="$3"
# 转换邮件标题为GB2312，解决邮件标题含有中文，收到邮件显示乱码的问题。
message_subject_gb2312=`iconv -t GB2312 -f UTF-8 << EOF
$message_subject_utf8
EOF`
[ $? -eq 0 ] && message_subject="$message_subject_gb2312" || message_subject="$message_subject_utf8"
# 转换邮件内容为GB2312，解决收到邮件内容乱码
message_body_gb2312=`iconv -t GB2312 -f UTF-8 << EOF
$message_body_utf8
EOF`
[ $? -eq 0 ] && message_body="$message_body_gb2312" || message_body="$message_body_utf8"
# 发送邮件
sendEmail='/usr/local/bin/sendEmail'
set -x
$sendEmail -s "$SMTP_server" -xu "$username" -xp "$password" -f "$from_email_address" -t "$to_email_address" -u "$message_subject" -m "$message_body" -o message-content-type=text -o message-charset=gb2312
每10分钟定时执行该监控脚本
[root@cx-app01 ~]# crontab -l
*/10 * * * * /bin/bash -x /opt/hosts_ip_monit.sh > /dev/null 2>&1
案例三：通过nc工具对/etc/hosts列表里的ip的443端口跟本机通信是否正常进行探测
案例二是针对ping编写的监控脚本，下面介绍下利用nc探测端口通信是否正常的脚本：
探测本机对下面/etc/hosts文件里的ip地址的443端口通信是否正常，如果通信失败，则发出报警，并在/etc/hosts文件里注释掉该ip地址的绑定关系。
如果注释掉的ip的443端口跟本机恢复了通信，则去掉/etc/hosts文件里该ip的注释！
[root@cx-app01 ~]# cat /etc/hosts
192.168.10.201 www.test.com
192.168.10.205 www.test.com
192.168.10.17 www.test.com
192.168.10.85 www.test.com
192.168.10.176 www.test.com
192.168.10.245 www.test.com
192.168.10.25 www.test.com
192.168.10.47 www.test.com
[root@cx-app01 ~]# cat /opt/hosts_ip_list
192.168.10.201
192.168.10.205
192.168.10.17
192.168.10.85
192.168.10.176
192.168.10.245
192.168.10.25
192.168.10.47
采用nc工具去探测端口是否正常通信（yum install -y nc）
[root@cx-app01 ~]# /usr/bin/nc -z -w 10 192.168.10.201 443
Connection to 192.168.10.201 443 port [tcp/https] succeeded!
针对上面ip列表里的地址，进行批量ip的443端口通信的探测。脚本如下：
[root@cx-app01 ~]# cat /opt/host_ip_nc_monit.sh
#!/bin/bash
for ip in $(cat /opt/hosts_ip_list)
do
echo -e "Date : $DATE\nHost : $ip\nProblem : Port 443 is connected."
cat /etc/hosts|grep "^#$ip"
a=$?
if [ $a -ne 0 ];then
/usr/bin/nc -z -w 10 $ip 443
b=$?
if [ $b -ne 0 ];then
/bin/bash /opt/sendemail.sh wangshibo@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip的443端口连接失败，现已在/etc/hosts文件里注释掉该ip的映射关系"
/bin/bash /opt/sendemail.sh linan@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip的443端口连接失败，现已在/etc/hosts文件里注释掉该ip的映射关系"
/bin/sed -i 's/^'$ip'/'#$ip'/g' /etc/hosts
else
echo "$HOSTNAME跟$ip的443端口正常连接"
fi
else
/usr/bin/nc -z -w 10 $ip 443
c=$?
if [ $c -eq 0 ];then
/bin/bash /opt/sendemail.sh wangshibo@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip的443端口连接成功，现已在/etc/hosts文件里恢复该ip的映射关系"
/bin/bash /opt/sendemail.sh linan@test.com "测试系统跟www.test.com通信情况" "$HOSTNAME跟$ip的443端口连接成功，现已在/etc/hosts文件里恢复该ip的映射关系"
/bin/sed -i 's/^'#$ip'/'$ip'/g' /etc/hosts
else
echo "$HOSTNAME跟$ip的443端口连接失败"
fi
fi
done
给脚本赋权
[root@cx-app01 ~]# chmod 755 /opt/host_ip_nc_monit.sh
执行脚本：
[root@cx-app01 ~]# sh /opt/host_ip_nc_monit.sh
Date :
Host : 192.168.10.201
Problem : Port 443 is connected.
Connection to 192.168.10.201 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.201的443端口正常连接
Date :
Host : 192.168.10.205
Problem : Port 443 is connected.
Connection to 192.168.10.205 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.205的443端口正常连接
Date :
Host : 192.168.10.17
Problem : Port 443 is connected.
Connection to 192.168.10.17 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.17的443端口正常连接
Date :
Host : 192.168.10.85
Problem : Port 443 is connected.
Connection to 192.168.10.85 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.85的443端口正常连接
Date :
Host : 192.168.10.176
Problem : Port 443 is connected.
Connection to 192.168.10.176 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.176的443端口正常连接
Date :
Host : 192.168.10.245
Problem : Port 443 is connected.
Connection to 192.168.10.245 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.245的443端口正常连接
Date :
Host : 192.168.10.25
Problem : Port 443 is connected.
Connection to 192.168.10.25 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.25的443端口正常连接
Date :
Host : 192.168.10.47
Problem : Port 443 is connected.
Connection to 192.168.10.47 443 port [tcp/https] succeeded!
cx-app01.veredholdings.cn跟192.168.10.47的443端口正常连接
结合crontab进行计划任务
[root@cx-app01 ~]# crontab -l
*/10 * * * * /bin/bash -x /opt/host_ip_nc_monit.sh > /dev/null 2>&1