200 ? "200px" : this.width)!important;}
-->
介绍
环境
OS:CentOS 6.7,MySQL 5.6
Master:192.168.137.10 hosts:master
Backup:192.168.137.20 hosts:slave
VIP:192.168.137.50
Master配置
修改cnf配置文件：
server_id = log_bin=/usr/local/mysql/data/mysql_bin max_binlog_size = 1G binlog_format=MIXED #binlog-do-db= binlog-ignore-db=test #这里记住不要加入系统数据库，多个数据库以逗号隔开 #replicate-do-db= replicate-ignore-db=test log-slave-updates slave-skip-errors=all auto_increment_increment= auto_increment_offset=
重启mysql
Service mysql restart
查看binglog位置
SHOW MASTER STATUS
由于是刚创建默认是：mysql_bin.000001:120
创建复制用户：
mysql –uroot -proot
GRANT REPLICATION SLAVE ON *.* TO 'repl'@'192.168.80.%' IDENTIFIED BY 'repl';
flush privileges; change master to master_host = '192.168.137.20', master_user = 'repl', master_password = 'repl', master_log_file = 'mysql_bin.000001', #注意binlog的命名 master_log_pos = ;
启动复制，先在132上创建完复制用户再执行
start slave;
Backup配置
server_id = log_bin=/usr/local/mysql/data/mysql_bin max_binlog_size = 1G binlog_format=MIXED #binlog-do-db= binlog-ignore-db=test #replicate-do-db= replicate-ignore-db=test #这里记住不要加入系统数据库，多个数据库以逗号隔开 log-slave-updates slave-skip-errors=all auto_increment_increment= auto_increment_offset=
重启mysql
Service mysql restart
查看binglog位置
SHOW MASTER STATUS
由于是刚创建默认是：mysql_bin.000001:120
创建复制用户：mysql –uroot -proot
GRANT REPLICATION SLAVE ON *.* TO 'repl'@'192.168.80.%' IDENTIFIED BY 'repl';
flush privileges; change master to master_host = '192.168.137.10', master_user = 'repl', master_password = 'repl', master_log_file = 'mysql-bin.000001', #注意binlog的命名 master_log_pos = ;
启动复制
start slave;
master keeplived安装配置
通过keeplived管理虚拟IP，并执行故障切换。
yum install openssl openssl-devel -y wget http://www.keepalived.org/software/keepalived-1.2.19.tar.gz tar -xvf keepalived-1.2..tar.gz cd keepalived-1.2. ./configure --prefix=/usr/local/keepalived make && make install
配置启动项
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/ cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/ mkdir /etc/keepalived/
cp /usr/local/keepalived/sbin/keepalived /usr/bin/
keepalived配置
master
vim /etc/keepalived/keepalived.conf
#! Configuration File forkeepalived
global_defs {
notification_email {
test@.com
}
notification_email_from ha@.com
smtp_server 127.0.0.1
smtp_connect_timeout
router_id MYSQL #组标识，双主相同
}
vrrp_instance VI_1 {
state BACKUP #两台都设置BACKUP
interface eth0
virtual_router_id #主备相同
priority #优先级，backup设置120 master设置150
advert_int
nopreempt #不主动抢占资源，两台都设置
authentication {
auth_type PASS
auth_pass
}
virtual_ipaddress {
192.168.137.50 #虚拟IP
}
}
virtual_server 192.168.137.50 {
delay_loop
#lb_algo rr #LVS算法，用不到，我们就关闭了
#lb_kind DR #LVS模式如果不关闭备用服务器不能通过VIP连接主MySQL
persistence_timeout #同一IP的连接60秒内被分配到同一台真实服务器
protocol TCP
real_server 192.168.137.10 { #检测本地mysql，backup也要写检测本地mysql
weight
notify_down /usr/local/keepalived/mysql.sh #当mysq服down时，执行此脚本，杀死keepalived实现切换
TCP_CHECK {
connect_timeout #连接超时
nb_get_retry #重试次数
delay_before_retry #重试间隔时间 }
}
}
backup
vim /etc/keepalived/keepalived.conf
#! Configuration File forkeepalived
global_defs {
notification_email {
test@.com
}
notification_email_from ha@.com
smtp_server 127.0.0.1
smtp_connect_timeout
router_id MYSQL #组标识，双主相同
}
vrrp_instance VI_1 {
state BACKUP #两台都设置BACKUP
interface eth0
virtual_router_id #主备相同
priority #优先级，backup设置120 master设置150
advert_int
authentication {
auth_type PASS
auth_pass
}
virtual_ipaddress {
192.168.137.50
}
} virtual_server 192.168.137.50 {
delay_loop
#lb_algo rr #LVS算法，用不到，我们就关闭了
# #lb_kind DR #LVS模式如果不关闭备用服务器不能通过VIP连接主MySQL
persistence_timeout #同一IP的连接60秒内被分配到同一台真实服务器
protocol TCP
real_server 192.168.137.20 { #检测本地mysql，backup也要写检测本地mysql
weight
notify_down /usr/local/keepalived/mysql.sh #当mysq服down时，执行此脚本，杀死keepalived实现切换
TCP_CHECK {
connect_timeout #连接超时
nb_get_retry #重试次数
delay_before_retry #重试间隔时间 }
}
}
注意：nopreempt（不主动抢占）针对优先级高的一方是有效的；如果不使用 nopreempt 那么优先级高的服务器每次重启都会把VIP抢占过去，这样会导致VIP频繁切换。正常情况下VIP切换到了哪一台服务器就把那台作为主不需要再抢占回去，目前测试nopreempt针对优先级低的一方没有效果，优先级低的不加上该参数也不会把优先级高的VIP抢占走。
将keepalived加入系统启动项
chkconfig --add keepalived chkconfig keepalived on
vim /usr/local/keepalived/mysql.sh
#!/bin/bash pkill keepalived
修改文件可执行权限
chmod +x /usr/local/keepalived/mysql.sh
启动Keepalived
service keepalived start
查看VIP状态
ip add
注意：在文件配置中使用备注千万要注意，要确保你的备注被识别为备注，之前就遇到过这样的问题在代码后使用#备注由于#和实际的代码挨在一起被程序当成了代码导致整个配置出现了问题，特别是这种问题很难找，所以代码中使用备注千万要小心。
总结
|
备注： 作者：pursuer.chen 博客：http://www.cnblogs.com/chenmh 本站点所有随笔都是原创，欢迎大家转载；但转载时必须注明文章来源，且在文章开头明显处给明链接。 《欢迎交流讨论》 |