So I have changed my Makefile, but now when it says:
所以我改变了我的Makefile，但现在它说:
gcc: error: missing argument to '-l'
make: *** [nfc-emulate-forum-tag4] Error 1
This is the makefile in total, where I cannot even find a -l
这是整个makefile，在这里我甚至找不到-l。
pkgdatadir = $(datadir)/libnfc
pkgincludedir = $(includedir)/libnfc
pkglibdir = $(libdir)/libnfc
pkglibexecdir = $(libexecdir)/libnfc
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = armv6l-unknown-linux-gnueabihf
host_triplet = armv6l-unknown-linux-gnueabihf
bin_PROGRAMS = nfc-emulate-forum-tag4$(EXEEXT) nfc-list$(EXEEXT) \
nfc-mfclassic$(EXEEXT) nfc-mfultralight$(EXEEXT) \
nfc-read-forum-tag3$(EXEEXT) nfc-relay-picc$(EXEEXT) \
nfc-scan-device$(EXEEXT)
subdir = utils
DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libnfc_check_libusb.m4 \
$(top_srcdir)/m4/libnfc_check_pcsc.m4 \
$(top_srcdir)/m4/libnfc_drivers.m4 $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/m4/readline.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)
libnfcutils_la_LIBADD =
am_libnfcutils_la_OBJECTS = nfc-utils.lo
libnfcutils_la_OBJECTS = $(am_libnfcutils_la_OBJECTS)
AM_V_lt = $(am__v_lt_$(V))
am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
am__v_lt_0 = --silent
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
PROGRAMS = $(bin_PROGRAMS)
am_nfc_emulate_forum_tag4_OBJECTS = nfc-emulate-forum-tag4.$(OBJEXT)
nfc_emulate_forum_tag4_OBJECTS = $(am_nfc_emulate_forum_tag4_OBJECTS)
nfc_emulate_forum_tag4_DEPENDENCIES = \
$(top_builddir)/libnfc/libnfc.la libnfcutils.la
am_nfc_list_OBJECTS = nfc-list.$(OBJEXT)
nfc_list_OBJECTS = $(am_nfc_list_OBJECTS)
nfc_list_DEPENDENCIES = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
am_nfc_mfclassic_OBJECTS = nfc-mfclassic.$(OBJEXT) mifare.$(OBJEXT)
nfc_mfclassic_OBJECTS = $(am_nfc_mfclassic_OBJECTS)
nfc_mfclassic_DEPENDENCIES = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
am_nfc_mfultralight_OBJECTS = nfc-mfultralight.$(OBJEXT) \
mifare.$(OBJEXT)
nfc_mfultralight_OBJECTS = $(am_nfc_mfultralight_OBJECTS)
nfc_mfultralight_DEPENDENCIES = $(top_builddir)/libnfc/libnfc.la
am_nfc_read_forum_tag3_OBJECTS = nfc-read-forum-tag3.$(OBJEXT)
nfc_read_forum_tag3_OBJECTS = $(am_nfc_read_forum_tag3_OBJECTS)
nfc_read_forum_tag3_DEPENDENCIES = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
am_nfc_relay_picc_OBJECTS = nfc-relay-picc.$(OBJEXT)
nfc_relay_picc_OBJECTS = $(am_nfc_relay_picc_OBJECTS)
nfc_relay_picc_DEPENDENCIES = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
am_nfc_scan_device_OBJECTS = nfc-scan-device.$(OBJEXT)
nfc_scan_device_OBJECTS = $(am_nfc_scan_device_OBJECTS)
nfc_scan_device_DEPENDENCIES = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_$(V))
am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
am__v_CC_0 = @echo " CC " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -I/usr/include/mysql /usr/lib/libmysqlclient.so.16 -o $@
AM_V_CCLD = $(am__v_CCLD_$(V))
am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
am__v_CCLD_0 = @echo " CCLD " $@;
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(libnfcutils_la_SOURCES) $(nfc_emulate_forum_tag4_SOURCES) \
$(nfc_list_SOURCES) $(nfc_mfclassic_SOURCES) \
$(nfc_mfultralight_SOURCES) $(nfc_read_forum_tag3_SOURCES) \
$(nfc_relay_picc_SOURCES) $(nfc_scan_device_SOURCES)
DIST_SOURCES = $(libnfcutils_la_SOURCES) \
$(nfc_emulate_forum_tag4_SOURCES) $(nfc_list_SOURCES) \
$(nfc_mfclassic_SOURCES) $(nfc_mfultralight_SOURCES) \
$(nfc_read_forum_tag3_SOURCES) $(nfc_relay_picc_SOURCES) \
$(nfc_scan_device_SOURCES)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(dist_man_MANS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /root/libnfc-1.7.0/missing --run aclocal-1.11
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 0
AR = ar
AUTOCONF = ${SHELL} /root/libnfc-1.7.0/missing --run autoconf
AUTOHEADER = ${SHELL} /root/libnfc-1.7.0/missing --run autoheader
AUTOMAKE = ${SHELL} /root/libnfc-1.7.0/missing --run automake-1.11
AWK = mawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -Wall -pedantic -Wextra -std=c99 -Du_int8_t=uint8_t -Du_int16_t=uint16_t
CPP = gcc -E
CFLAGS += -I/usr/include/mysql/ -L/usr/lib/mysql/ -Imysqlclient
CPPFLAGS =
CUTTER =
CUTTER_CFLAGS =
CUTTER_LIBS =
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DOXYGEN =
DRIVERS_CFLAGS = -DDRIVER_ACR122_USB_ENABLED -DDRIVER_ACR122S_ENABLED -DDRIVER_ARYGON_ENABLED -DDRIVER_PN53X_USB_ENABLED -DDRIVER_PN532_UART_ENABLED -DDRIVER_PN532_SPI_ENABLED -DDRIVER_PN532_I2C_ENABLED
DSYMUTIL =
DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
FGREP = /bin/grep -F
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld
LDFLAGS =
LIBNFC_CFLAGS = -I$(top_srcdir)/libnfc -I$(top_builddir)/include -I$(top_srcdir)/include
LIBOBJS =
LIBS =
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO =
LN_S = ln -s
LTLIBOBJS =
MAKEINFO = ${SHELL} /root/libnfc-1.7.0/missing --run makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
NM = /usr/bin/nm -B
NMEDIT =
OBJDUMP = objdump
OBJEXT = o
OTOOL =
OTOOL64 =
PACKAGE = libnfc
PACKAGE_BUGREPORT = nfc-tools@googlegroups.com
PACKAGE_NAME = libnfc
PACKAGE_STRING = libnfc 1.7.0
PACKAGE_TARNAME = libnfc
PACKAGE_URL =
PACKAGE_VERSION = 1.7.0
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR =
PKG_CONFIG_PATH =
PKG_CONFIG_REQUIRES = libusb
RANLIB = ranlib
READLINE_INCLUDES =
READLINE_LIBS =
SED = /bin/sed
SET_MAKE =
SHELL = /bin/bash
STRIP = strip
VERSION = 1.7.0
abs_builddir = /root/libnfc-1.7.0/utils
abs_srcdir = /root/libnfc-1.7.0/utils
abs_top_builddir = /root/libnfc-1.7.0
abs_top_srcdir = /root/libnfc-1.7.0
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = ${exec_prefix}/bin
build = armv6l-unknown-linux-gnueabihf
build_alias =
build_cpu = armv6l
build_os = linux-gnueabihf
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = armv6l-unknown-linux-gnueabihf
host_alias =
host_cpu = armv6l
host_os = linux-gnueabihf
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /root/libnfc-1.7.0/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
libpcsclite_CFLAGS =
libpcsclite_LIBS =
libusb_CFLAGS =
libusb_CONFIG =
libusb_LIBS = -lusb
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias =
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
# set the include path found by configure
AM_CPPFLAGS = $(all_includes) $(LIBNFC_CFLAGS)
noinst_LTLIBRARIES = libnfcutils.la
libnfcutils_la_SOURCES = nfc-utils.c
nfc_emulate_forum_tag4_SOURCES = nfc-emulate-forum-tag4.c nfc-utils.h
nfc_emulate_forum_tag4_LDADD = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
nfc_list_SOURCES = nfc-list.c nfc-utils.h
nfc_list_LDADD = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
nfc_mfclassic_SOURCES = nfc-mfclassic.c mifare.c mifare.h nfc-utils.h
nfc_mfclassic_LDADD = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
nfc_mfultralight_SOURCES = nfc-mfultralight.c mifare.c mifare.h nfc-utils.h
nfc_mfultralight_LDADD = $(top_builddir)/libnfc/libnfc.la
nfc_read_forum_tag3_SOURCES = nfc-read-forum-tag3.c nfc-utils.h
nfc_read_forum_tag3_LDADD = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
nfc_relay_picc_SOURCES = nfc-relay-picc.c nfc-utils.h
nfc_relay_picc_LDADD = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
nfc_scan_device_SOURCES = nfc-scan-device.c nfc-utils.h
nfc_scan_device_LDADD = $(top_builddir)/libnfc/libnfc.la \
libnfcutils.la
dist_man_MANS = \
nfc-emulate-forum-tag4.1 \
nfc-list.1 \
nfc-mfclassic.1 \
nfc-mfultralight.1 \
nfc-read-forum-tag3.1 \
nfc-relay-picc.1 \
nfc-scan-device.1
EXTRA_DIST = CMakeLists.txt
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu utils/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu utils/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
clean-noinstLTLIBRARIES:
-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libnfcutils.la: $(libnfcutils_la_OBJECTS) $(libnfcutils_la_DEPENDENCIES) $(EXTRA_libnfcutils_la_DEPENDENCIES)
$(AM_V_CCLD)$(LINK) $(libnfcutils_la_OBJECTS) $(libnfcutils_la_LIBADD) $(LIBS)
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p || test -f $$p1; \
then echo "$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) files[d] = files[d] " " $$1; \
else { print "f", $$3 "/" $$4, $$1; } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-e 's/$$/$(EXEEXT)/' `; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
echo " rm -f" $$list; \
rm -f $$list || exit $$?; \
test -n "$(EXEEXT)" || exit 0; \
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
nfc-emulate-forum-tag4$(EXEEXT): $(nfc_emulate_forum_tag4_OBJECTS) $(nfc_emulate_forum_tag4_DEPENDENCIES) $(EXTRA_nfc_emulate_forum_tag4_DEPENDENCIES)
@rm -f nfc-emulate-forum-tag4$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(nfc_emulate_forum_tag4_OBJECTS) $(nfc_emulate_forum_tag4_LDADD) $(LIBS)
nfc-list$(EXEEXT): $(nfc_list_OBJECTS) $(nfc_list_DEPENDENCIES) $(EXTRA_nfc_list_DEPENDENCIES)
@rm -f nfc-list$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(nfc_list_OBJECTS) $(nfc_list_LDADD) $(LIBS)
nfc-mfclassic$(EXEEXT): $(nfc_mfclassic_OBJECTS) $(nfc_mfclassic_DEPENDENCIES) $(EXTRA_nfc_mfclassic_DEPENDENCIES)
@rm -f nfc-mfclassic$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(nfc_mfclassic_OBJECTS) $(nfc_mfclassic_LDADD) $(LIBS)
nfc-mfultralight$(EXEEXT): $(nfc_mfultralight_OBJECTS) $(nfc_mfultralight_DEPENDENCIES) $(EXTRA_nfc_mfultralight_DEPENDENCIES)
@rm -f nfc-mfultralight$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(nfc_mfultralight_OBJECTS) $(nfc_mfultralight_LDADD) $(LIBS)
nfc-read-forum-tag3$(EXEEXT): $(nfc_read_forum_tag3_OBJECTS) $(nfc_read_forum_tag3_DEPENDENCIES) $(EXTRA_nfc_read_forum_tag3_DEPENDENCIES)
@rm -f nfc-read-forum-tag3$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(nfc_read_forum_tag3_OBJECTS) $(nfc_read_forum_tag3_LDADD) $(LIBS)
nfc-relay-picc$(EXEEXT): $(nfc_relay_picc_OBJECTS) $(nfc_relay_picc_DEPENDENCIES) $(EXTRA_nfc_relay_picc_DEPENDENCIES)
@rm -f nfc-relay-picc$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(nfc_relay_picc_OBJECTS) $(nfc_relay_picc_LDADD) $(LIBS)
nfc-scan-device$(EXEEXT): $(nfc_scan_device_OBJECTS) $(nfc_scan_device_DEPENDENCIES) $(EXTRA_nfc_scan_device_DEPENDENCIES)
@rm -f nfc-scan-device$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(nfc_scan_device_OBJECTS) $(nfc_scan_device_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
include ./$(DEPDIR)/mifare.Po
include ./$(DEPDIR)/nfc-emulate-forum-tag4.Po
include ./$(DEPDIR)/nfc-list.Po
include ./$(DEPDIR)/nfc-mfclassic.Po
include ./$(DEPDIR)/nfc-mfultralight.Po
include ./$(DEPDIR)/nfc-read-forum-tag3.Po
include ./$(DEPDIR)/nfc-relay-picc.Po
include ./$(DEPDIR)/nfc-scan-device.Po
include ./$(DEPDIR)/nfc-utils.Plo
.c.o:
$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
$(am__mv) $$depbase.Tpo $$depbase.Po
# $(AM_V_CC)source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC_no)$(COMPILE) -c -o $@ $<
.c.obj:
$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
$(am__mv) $$depbase.Tpo $$depbase.Po
# $(AM_V_CC)source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
$(am__mv) $$depbase.Tpo $$depbase.Plo
# $(AM_V_CC)source='$<' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-man1: $(dist_man_MANS)
@$(NORMAL_INSTALL)
test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
@list=''; test -n "$(man1dir)" || exit 0; \
{ for i in $$list; do echo "$$i"; done; \
l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@list='$(MANS)'; if test -n "$$list"; then \
list=`for p in $$list; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
if test -n "$$list" && \
grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
echo " typically \`make maintainer-clean' will remove them" >&2; \
exit 1; \
else :; fi; \
else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS)
installdirs:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic clean-libtool \
clean-noinstLTLIBRARIES mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
I'va searched for the directory /usr/lib/mysql/ but I don't have it.
我搜索了目录/usr/lib/mysql/，但我没有。
I have not managed to find the solution to this error on internet, so maybe one of you have any idea or just some info to find it out myself.
我没能在网上找到这个错误的解决方案，所以也许你们当中有一个人有任何想法或者只是一些信息来发现我自己。
1 个解决方案
#1
1
Well, there's some error in your Makefile.
你的Makefile中有一些错误。
You are giving the compiler the option -l which is used to include a library, but then you don't give it the expected name of the library. See the GCC manual for details on this option and its usage.
你给了编译器一个选项-l，它被用来包含一个库，但是你不会给它一个期望的名字。有关此选项及其用法的详细信息，请参阅GCC手册。
Typically the option is used like this:
通常情况下，选项是这样的:
gcc -o myprog myproc.c -lm
To include the library called "libm.a", for instance.
其中包括名为“libm”的库。例如,一个“。
#1
1
Well, there's some error in your Makefile.
你的Makefile中有一些错误。
You are giving the compiler the option -l which is used to include a library, but then you don't give it the expected name of the library. See the GCC manual for details on this option and its usage.
你给了编译器一个选项-l，它被用来包含一个库，但是你不会给它一个期望的名字。有关此选项及其用法的详细信息，请参阅GCC手册。
Typically the option is used like this:
通常情况下，选项是这样的:
gcc -o myprog myproc.c -lm
To include the library called "libm.a", for instance.
其中包括名为“libm”的库。例如,一个“。