【生产】部署高可用k8s集群-kubeadm

软件环境：

软件	版本
操作系统	CentOS7.8_x64 （mini）
Docker	19-ce
Kubernetes	1.20

服务器整体规划：

角色	IP	其他单装组件
k8s-master1	192.168.40.180	docker，etcd，keepalived
k8s-master2	192.168.40.181	docker，etcd，keepalived
k8s-master3	192.168.40.183	docker，etcd，keepalived
负载均衡器对外IP	192.168.40.188 (VIP)

架构图：

【生产】部署高可用k8s集群-kubeadm

环境准备：

# 关闭防火墙
systemctl stop firewalld
systemctl disable firewalld

# 关闭selinux
sed -i 's/enforcing/disabled/' /etc/selinux/config  # 永久
setenforce 0  # 临时

# 关闭swap
swapoff -a  # 临时
sed -ri 's/.*swap.*/#&/' /etc/fstab    # 永久

# 根据规划设置主机名
hostnamectl set-hostname <hostname>
bash

# 在master添加hosts
cat >> /etc/hosts << EOF
192.168.40.180 k8s-master1
192.168.40.181 k8s-master2
192.168.40.182 k8s-master3
EOF

# 将桥接的IPv4流量传递到iptables的链
cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system  # 生效

# 时间同步
yum install ntpdate -y
ntpdate time.windows.com

# 添加阿里云YUM软件源
cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

#安装必要的一些系统工具
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
# 添加dockerYUM软件源
 sudo yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

# 安装基础软件包
yum install -y yum-utils device-mapper-persistent-data lvm2 wget net-tools nfs-utils lrzsz gcc gcc-c++ make cmake libxml2-devel openssl-devel curl curl-devel unzip sudo ntp libaio-devel wget vim ncurses-devel autoconf automake zlib-devel  python-devel epel-release openssh-server socat  ipvsadm conntrack ntpdate telnet ipvsadm iptables-services 

# 禁用iptables
 systemctl stop iptables && systemctl disable iptables

#清空防火墙规则
iptables -F

# 配置免密登录
ssh-keygen

开启ipvs

cat > /etc/sysconfig/modules/ipvs.modules <<\EOF
#!/bin/bash
ipvs_modules="ip_vs ip_vs_lc ip_vs_wlc ip_vs_rr ip_vs_wrr ip_vs_lblc ip_vs_lblcr ip_vs_dh ip_vs_sh ip_vs_nq ip_vs_sed ip_vs_ftp nf_conntrack"
for kernel_module in ${ipvs_modules}; do
 /sbin/modinfo -F filename ${kernel_module} > /dev/null 2>&1
 if [ 0 -eq 0 ]; then
 /sbin/modprobe ${kernel_module}
 fi
done
EOF

把ipvs.modules上传到k8s-master1;k8s-master2;k8s-master3机器的/etc/sysconfig/modules/目录下

脚本执行

chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs

安装docker

yum install docker-ce-20.10.6 docker-ce-cli-20.10.6 containerd.io  -y

systemctl start docker && systemctl enable docker && systemctl status docker

配置docker镜像加速器和驱动

cat > /etc/docker/daemon.json <<\EOF
{
"registry-mirrors":["https://rsbud4vc.mirror.aliyuncs.com","https://registry.docker-cn.com","https://docker.mirrors.ustc.edu.cn","https://dockerhub.azk8s.cn","http://hub-mirror.c.163.com","http://qtid6917.mirror.aliyuncs.com", "https://rncxm540.mirror.aliyuncs.com"],
  "exec-opts": ["native.cgroupdriver=systemd"]
}

EOF

systemctl daemon-reload  && systemctl restart docker
systemctl status docker
docker info

#修改docker文件驱动为systemd，默认为cgroupfs，kubelet默认使用systemd，两者必须一致才可以。

安装初始化k8s需要的软件包

yum install -y kubelet-1.20.6 kubeadm-1.20.6 kubectl-1.20.6

systemctl enable kubelet && systemctl start kubelet

systemctl status kubelet

上面kubelet状态不是running状态，这个是正常的，不用管，等k8s组件起来这个kubelet就正常了#

keepalived安装

yum install  keepalived -y

cat /etc/keepalived/keepalived.conf

cat > /etc/keepalived/keepalived.conf <<\EOF
! Configuration File for keepalived

global_defs {
    smtp_server localhost
}

vrrp_script chk_kubeapiserver {
    script "/etc/keepalived/keepalived_checkkubeapiserver.sh"
    interval 3
    timeout 1
    rise 3
    fall 3
}

vrrp_instance kubernetes-internal {
    state BACKUP
    interface ens32
    virtual_router_id 171
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
}
    virtual_ipaddress {
        192.168.40.188
}
    track_script {
    chk_kubeapiserver
}
}

EOF

matser2

cat > /etc/keepalived/keepalived.conf <<\EOF
! Configuration File for keepalived

global_defs {
    smtp_server localhost
}

vrrp_script chk_kubeapiserver {
    script "/etc/keepalived/keepalived_checkkubeapiserver.sh"
    interval 3
    timeout 1
    rise 3
    fall 3
}

vrrp_instance kubernetes-internal {
    state BACKUP
    interface ens33
    virtual_router_id 171
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
}
    virtual_ipaddress {
        192.168.40.188
}
    track_script {
    chk_kubeapiserver
}
}
EOF

mtaster3

cat > /etc/keepalived/keepalived.conf <<\EOF
! Configuration File for keepalived

global_defs {
    smtp_server localhost
}

vrrp_script chk_kubeapiserver {
    script "/etc/keepalived/keepalived_checkkubeapiserver.sh"
    interval 3
    timeout 1
    rise 3
    fall 3
}

vrrp_instance kubernetes-internal {
    state BACKUP
    interface ens32
    virtual_router_id 171
    priority 98
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
}
    virtual_ipaddress {
        192.168.40.188
}
    track_script {
    chk_kubeapiserver
}
}
EOF

检测api 脚本

cat  > /etc/keepalived/keepalived_checkkubeapiserver.sh <<EOF
#!/bin/bash
sudo ss -ltn|grep ":6443 " > /dev/null

EOF

chmod  644 /etc/keepalived/keepalived.conf   && chmod 700 /etc/keepalived/keepalived_checkkubeapiserver.sh

systemctl daemon-reload && systemctl start keepalived && systemctl enable  keepalived

kubeadm初始化k8s集群

在k8s-master1上创建kubeadm-config.yaml文件：

[root@k8s-master1 ~]# cd /root/

[root@k8s-master1]# vim kubeadm-config.yaml

cat > kubeadm-config.yaml << EOF
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: v1.20.6
controlPlaneEndpoint: 192.168.40.188:6443
imageRepository: registry.aliyuncs.com/google_containers
apiServer:
 certSANs:
 - 192.168.40.180
 - 192.168.40.181
 - 192.168.40.182
 - 192.168.40.188
networking:
  podSubnet: 10.244.0.0/16
  serviceSubnet: 10.10.0.0/16
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind:  KubeProxyConfiguration
mode: ipvs
EOF

安装

kubeadm init --config kubeadm-config.yaml

mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

【生产】部署高可用k8s集群-kubeadm

master 新增

在k8s-master1 上运行脚本，将证书分发至master02和master03

cat > cert-main-master.sh <<\EOF
#!/bin/bash
USER=root
CONTROL_PLANE_IPS="192.168.40.181 192.168.40.182"
for host in ${CONTROL_PLANE_IPS}; do
    scp /etc/kubernetes/pki/ca.crt "${USER}"@$host:
    scp /etc/kubernetes/pki/ca.key "${USER}"@$host:
    scp /etc/kubernetes/pki/sa.key "${USER}"@$host:
    scp /etc/kubernetes/pki/sa.pub "${USER}"@$host:
    scp /etc/kubernetes/pki/front-proxy-ca.crt "${USER}"@$host:
    scp /etc/kubernetes/pki/front-proxy-ca.key "${USER}"@$host:
    scp /etc/kubernetes/pki/etcd/ca.crt "${USER}"@$host:etcd-ca.crt
# Quote this line if you are using external etcd
    scp /etc/kubernetes/pki/etcd/ca.key "${USER}"@$host:etcd-ca.key
done
EOF

sh ./cert-main-master.sh

在master02;master3 上运行脚本cert-other-master.sh，将证书移至指定目录

cat > cert-other-master.sh <<\EOF

#!/bin/bash
USER=root # customizable
mkdir -p /etc/kubernetes/pki/etcd
mv /${USER}/ca.crt /etc/kubernetes/pki/
mv /${USER}/ca.key /etc/kubernetes/pki/
mv /${USER}/sa.pub /etc/kubernetes/pki/
mv /${USER}/sa.key /etc/kubernetes/pki/
mv /${USER}/front-proxy-ca.crt /etc/kubernetes/pki/
mv /${USER}/front-proxy-ca.key /etc/kubernetes/pki/
mv /${USER}/etcd-ca.crt /etc/kubernetes/pki/etcd/ca.crt
# Quote this line if you are using external etcd
mv /${USER}/etcd-ca.key /etc/kubernetes/pki/etcd/ca.key
EOF

sh cert-other-master.sh

在k8s-master1上查看加入节点的命令：

kubeadm token create --print-join-command

添加 --control-plane

带有 --control-plane 是用于加入组建多master集群的，不带的是加入节点的

证书拷贝之后在k8s-master2 k8s-master3上执行如下命令，大家复制自己的，这样就可以把k8s-master2和加入到集群，成为控制节点：

kubeadm join 192.168.40.188:6443 --token 2nlfta.1xlp02ux6drki244     --discovery-token-ca-cert-hash sha256:862edf59b13a7a819c461d398ae1953e4de07cd1d1bbfe5463f2b0308ecec366     --control-plane

【生产】部署高可用k8s集群-kubeadm

查看集群中的pod

【生产】部署高可用k8s集群-kubeadm

注意：上面状态都是NotReady状态，说明没有安装网络插件

安装kubernetes网络组件-Calico

curl  https://docs.projectcalico.org/v3.20/manifests/calico.yaml -o calico.yaml

查看当前pod网段

kubectl get cm kubeadm-config -n kube-system -o yaml | grep -i podsub

【生产】部署高可用k8s集群-kubeadm

修改 calico.yaml

根据实际网络规划修改Pod CIDR（CALICO_IPV4POOL_CIDR）

【生产】部署高可用k8s集群-kubeadm

选择工作模式（CALICO_IPV4POOL_IPIP），支持BGP（Never）、IPIP（Always）、CrossSubnet（开启BGP并支持跨子网）

【生产】部署高可用k8s集群-kubeadm

应用清单

kubectl apply -f calico.yaml
kubectl get pods -n kube-system

【生产】部署高可用k8s集群-kubeadm

去除污点，因为目前是3个master 节点，有默认污点。

[root@k8s-master1 ~]# kubectl describe nodes  | grep Taints
Taints:             node-role.kubernetes.io/master:NoSchedule
Taints:             node-role.kubernetes.io/master:NoSchedule
Taints:             node-role.kubernetes.io/master:NoSchedule


kubectl taint node k8s-master1 node-role.kubernetes.io/master:NoSchedule-
kubectl taint node k8s-master2 node-role.kubernetes.io/master:NoSchedule-
kubectl taint node k8s-master3 node-role.kubernetes.io/master:NoSchedule-

【生产】部署高可用k8s集群-kubeadm

测试网络

apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    app: busybox
  name: busybox
spec:
  replicas: 1
  selector:
    matchLabels:
      app: busybox
  strategy: {}
  template:
    metadata:
      labels:
        app: busybox
    spec:
      containers:
      - image: busybox:1.28
        name: busybox
        command: ["/bin/sh","-c","sleep 36000"]

【生产】部署高可用k8s集群-kubeadm

#通过上面可以看到能访问网络，说明calico网络插件已经被正常安装了

在Kubernetes集群中创建一个pod，验证是否正常运行：

kubectl create deployment nginx --image=nginx
kubectl expose deployment nginx --port=80 --type=NodePort
kubectl get pod,svc

访问地址：http://NodeIP:Port

测试coredns是否正常

【生产】部署高可用k8s集群-kubeadm

测试3个master 是否都可以运行pod
将 Pod 强制打散调度到不同节点上(强反亲和)

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx
spec:
  replicas: 3
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      affinity:
        podAntiAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
          - topologyKey: kubernetes.io/hostname
            labelSelector:
              matchLabels:
                app: nginx
      containers:
      - name: nginx
        image: nginx

【生产】部署高可用k8s集群-kubeadm

部署 Dashboard

wget https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.3/aio/deploy/recommended.yaml

默认Dashboard只能集群内部访问，修改Service为NodePort类型，暴露到外部：

vi recommended.yaml
...
kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  ports:
    - port: 443
      targetPort: 8443
      nodePort: 30001
  selector:
    k8s-app: kubernetes-dashboard
  type: NodePort
...
$ kubectl apply -f recommended.yaml
$ kubectl get pods -n kubernetes-dashboard
NAME                                         READY   STATUS    RESTARTS   AGE
dashboard-metrics-scraper-6b4884c9d5-gl8nr   1/1     Running   0          13m
kubernetes-dashboard-7f99b75bf4-89cds        1/1     Running   0          13m

访问地址：https://NodeIP:30001 （使用https）
创建service account并绑定默认cluster-admin管理员集群角色

# 创建用户
kubectl create serviceaccount dashboard-admin -n kube-system
# 用户授权
kubectl create clusterrolebinding dashboard-admin --clusterrole=cluster-admin --serviceaccount=kube-system:dashboard-admin
# 获取用户Token
kubectl describe secrets -n kube-system $(kubectl -n kube-system get secret | awk '/dashboard-admin/{print $1}')

使用输出的token登录Dashboard。

【生产】部署高可用k8s集群-kubeadm

问题1

Get "http://127.0.0.1:10251/healthz": dial tcp 127.0.0.1:10251: connect: connection refused

【生产】部署高可用k8s集群-kubeadm

可按如下方法处理： 
vim /etc/kubernetes/manifests/kube-scheduler.yaml
修改如下内容：
把--bind-address=127.0.0.1变成--bind-address=192.168.40.188
把httpGet:字段下的hosts由127.0.0.1变成192.168.40.188
把—port=0删除
#注意：192.168.40.188是k8s的控制节点的ip
vim /etc/kubernetes/manifests/kube-controller-manager.yaml
把--bind-address=127.0.0.1变成--bind-address=192.168.40.188
把httpGet:字段下的hosts由127.0.0.1变成192.168.40.188
把—port=0删除

修改之后在k8s各个节点执行
systemctl restart kubelet

秒客网

【生产】部署高可用k8s集群-kubeadm

软件环境：

服务器整体规划：

架构图：

环境准备：

开启ipvs

安装docker

配置docker镜像加速器和驱动

安装初始化k8s需要的软件包

keepalived安装

kubeadm初始化k8s集群

master 新增

查看集群中的pod

安装kubernetes网络组件-Calico

部署 Dashboard

问题1

相关文章