wifidog编译到openwrt

时间:2023-01-19 00:28:21

首先敲一下 cd 命令,定位到自己的用户目录,

然后 mkdir openwrt 新建一个openwrt文件夹,然后开始装openwrt的编译用到的工具,

sudo apt-get install g++
sudo apt-get install libncurses5-dev
sudo apt-get install zlib1g-dev
sudo apt-get install bison
sudo apt-get install flex
sudo apt-get install unzip
sudo apt-get install autoconf
sudo apt-get install gawk
sudo apt-get install make
sudo apt-get install gettext
sudo apt-get install gcc
sudo apt-get install binutils
sudo apt-get install patch
sudo apt-get install bzip2
sudo apt-get install libz-dev
sudo apt-get install asciidoc
sudo apt-get install subversion
sudo apt-get install sphinxsearch
sudo apt-get install libtool
sudo apt-get install sphinx-common

然后,git clone https://github.com/openwrt-mirror/openwrt.git

下载openwrt最新代码,

然后,cd openwrt ,定位到openwrt目录中,然后,vim feeds.conf.default,编辑要集成的模块,插入 src-git wifidog https://github.com/wifidog/wifidog-gateway.git

这一行,

最后的结果如下:

qinwx@ubuntu:~/openwrt/openwrt$ cat feeds.conf.default
src-git packages https://github.com/openwrt/packages.git
src-git luci https://github.com/openwrt/luci.git
src-git routing https://github.com/openwrt-routing/packages.git
src-git telephony https://github.com/openwrt/telephony.git
src-git management https://github.com/openwrt-management/packages.git
src-git targets https://github.com/openwrt/targets.git
src-git wifidog https://github.com/wifidog/wifidog-gateway.git
#src-git oldpackages http://git.openwrt.org/packages.git
#src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
#src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
#src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
#src-svn xorg svn://svn.openwrt.org/openwrt/feeds/xorg
#src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce
#src-svn lxde svn://svn.openwrt.org/openwrt/feeds/lxde
#src-link custom /usr/src/openwrt/custom-feed

然后,运行一下,./script/feed update -a

然后,运行一下,./script/feed install -a

然后,运行,make defconfig

再运行,make menuxonfig,进行选择要安装的配置,

进入make menuconfig后的设置部分 
选CPU型号 
Target System  ------------Ralink RT288x/RT3xxx

Subtarget     ------------MT7620a based boards 
如在代码中加入MTALL的模板,可编译时,只编译MTALL组件。

Target profile  -----------MTALL

在Network/captive portals/下选择wifidog

然后,运行,make V=99,开始编译

然后在bin文件夹中会生成 刷机固件

注意:

不能用root去做操作,要用普通用户,也不能用sudo 做操作,都用普通用户的权限就可以,要不然编译额时候 会报各种错误。

推荐一篇很不错的教程:

http://wenku.baidu.com/link?url=nToGzMp8JWQLIXmhjRcD7AvkobEXuUbLgYw6ThLlJd9OmjGiWPOe9uN25kYka3ntmXCVvn9-OK3OUQMCWpehyMlh8gQKPK474ra3G9XOIN3