I am having issues with RAD7.
我和RAD7有问题。
My server will not start for me today. I am working from home and connected to the VPN. Everything works except my server in RAD. It worked fine yesterday in work and had previously worked when I was at home but that was a few weeks ago.
我的服务器今天不会启动。我在家工作，并连接到VPN。除了我在RAD的服务器外，所有的工作都是正常的。昨天在工作中它工作得很好，以前我在家的时候工作过，但那是几周前的事了。
Are there any settings that I should look out for? I have disabled my proxy settings in RAD and turned off everything in my firewall. I can ping all the DBs that the server is connecting to.
有什么设置是我应该注意的吗?我在RAD中禁用了代理设置，并关闭了防火墙中的所有内容。我可以ping服务器连接到的所有DBs。
I have even removed all the projects from the server and it will still not start. It keeps trying and then times out after 300s.
我甚至已经从服务器上删除了所有的项目，而且还没有开始。它不断尝试，然后在300秒之后超时。
Any suggestions?
有什么建议吗?
6 个解决方案
#1
4
I got a similar error while Starting WebSphere Commerce server v7. This error in my case was caused by me increasing the Maximum Heap size to 2096. I reduced the heap size to 1536 and it worked. None of the errors/trace files indicated this problem.
在启动WebSphere Commerce server v7时，我遇到了类似的错误。在我的案例中，这个错误是由我将最大堆大小增加到2096引起的。我将堆大小减小到1536，然后就成功了。所有的错误/跟踪文件都没有指出这个问题。
#2
2
I have had this problem once before. I wasn't able to figure out what went wrong, but deleting that server and creating a new one (under Window -> Preferences -> Server -> WebSphere Application Server) fixed the problem.
我以前有过这个问题。我无法找出出错的原因，但是删除服务器并创建一个新的服务器(在Window ->的首选项下>服务器-> WebSphere Application server)解决了这个问题。
#3
2
I had this problem too. Double-click on the server to open the server 'OVERVIEW' tab/view. Scroll down to the section under 'Optimize server start for development:'; uncheck 'Start server with a generated script'. This worked for me. good luck.
我也有这个问题。双击服务器打开服务器“OVERVIEW”选项卡/视图。向下滚动到“优化服务器开始开发:”的部分;取消“使用生成的脚本启动服务器”。这为我工作。祝你好运。
#4
1
Read the appserver logs.
阅读应用服务器日志。
#5
0
Re the file not found exception. Make sure the directory path in Windows is of the CoRRectCase, e.g., GALFTGA342130Node01Cell-> galftga342130Node01Cell. I've encountered this on various RAD installations.
我们没有发现异常。确保Windows中的目录路径是正确的，例如GALFTGA342130Node01Cell-> GALFTGA342130Node01Cell。我在不同的RAD安装中遇到过这种情况。
#6
0
With reference to your following comment -
关于你的以下评论。
I looked at startserver.log and I saw a file not found exception for this file C:\IBM\SDP70\runtimes\base_v61\profiles\AppSrv01\config\cells\GALFTGA342130Node01Cell\nodes\GALFTGA342130Node01\serverindex.xml. I checked and the file exists but when I try to open it, I get told access denied.
我看着startserver。日志和我看到一个文件未找到例外,这个文件C:\ IBM \ SDP70 \ runtimes \ base_v61 \ profiles \ AppSrv01 \ config \细胞\ GALFTGA342130Node01细胞\ \ GALFTGA342130Node01 \ serverindex.xml节点。我检查过文件存在，但当我试图打开它时，我被告知访问被拒绝。
this link may help you in understanding the problem. it says -
这个链接可以帮助你理解这个问题。它说,
This is a permissions issue caused by the automatic port detection routine. If any profiles already exist and were created as a different user, the port detection routine will try to open the serverindex.xml file in each profile and will fail.
这是一个由自动端口检测程序引起的权限问题。如果已经存在任何配置文件并作为不同的用户创建，端口检测例程将尝试打开serverindex。每个概要文件中的xml文件都将失败。
You should set appropriate permissions for your user.
您应该为您的用户设置适当的权限。
#1
4
I got a similar error while Starting WebSphere Commerce server v7. This error in my case was caused by me increasing the Maximum Heap size to 2096. I reduced the heap size to 1536 and it worked. None of the errors/trace files indicated this problem.
在启动WebSphere Commerce server v7时，我遇到了类似的错误。在我的案例中，这个错误是由我将最大堆大小增加到2096引起的。我将堆大小减小到1536，然后就成功了。所有的错误/跟踪文件都没有指出这个问题。
#2
2
I have had this problem once before. I wasn't able to figure out what went wrong, but deleting that server and creating a new one (under Window -> Preferences -> Server -> WebSphere Application Server) fixed the problem.
我以前有过这个问题。我无法找出出错的原因，但是删除服务器并创建一个新的服务器(在Window ->的首选项下>服务器-> WebSphere Application server)解决了这个问题。
#3
2
I had this problem too. Double-click on the server to open the server 'OVERVIEW' tab/view. Scroll down to the section under 'Optimize server start for development:'; uncheck 'Start server with a generated script'. This worked for me. good luck.
我也有这个问题。双击服务器打开服务器“OVERVIEW”选项卡/视图。向下滚动到“优化服务器开始开发:”的部分;取消“使用生成的脚本启动服务器”。这为我工作。祝你好运。
#4
1
Read the appserver logs.
阅读应用服务器日志。
#5
0
Re the file not found exception. Make sure the directory path in Windows is of the CoRRectCase, e.g., GALFTGA342130Node01Cell-> galftga342130Node01Cell. I've encountered this on various RAD installations.
我们没有发现异常。确保Windows中的目录路径是正确的，例如GALFTGA342130Node01Cell-> GALFTGA342130Node01Cell。我在不同的RAD安装中遇到过这种情况。
#6
0
With reference to your following comment -
关于你的以下评论。
I looked at startserver.log and I saw a file not found exception for this file C:\IBM\SDP70\runtimes\base_v61\profiles\AppSrv01\config\cells\GALFTGA342130Node01Cell\nodes\GALFTGA342130Node01\serverindex.xml. I checked and the file exists but when I try to open it, I get told access denied.
我看着startserver。日志和我看到一个文件未找到例外,这个文件C:\ IBM \ SDP70 \ runtimes \ base_v61 \ profiles \ AppSrv01 \ config \细胞\ GALFTGA342130Node01细胞\ \ GALFTGA342130Node01 \ serverindex.xml节点。我检查过文件存在，但当我试图打开它时，我被告知访问被拒绝。
this link may help you in understanding the problem. it says -
这个链接可以帮助你理解这个问题。它说,
This is a permissions issue caused by the automatic port detection routine. If any profiles already exist and were created as a different user, the port detection routine will try to open the serverindex.xml file in each profile and will fail.
这是一个由自动端口检测程序引起的权限问题。如果已经存在任何配置文件并作为不同的用户创建，端口检测例程将尝试打开serverindex。每个概要文件中的xml文件都将失败。
You should set appropriate permissions for your user.
您应该为您的用户设置适当的权限。