CentOS 6.2 64bit 安装erlang及RabbitMQ Server
1、操作系统环境(CentOS 6.2 64bit)
[root@leekwen ~]# cat /etc/issue
CentOS release 6.2 (Final)
Kernel \r on an \m
[root@leekwen ~]# cat /proc/cpuinfo |grep "clflush size"
clflush size : 64
clflush size : 64
clflush size : 64
clflush size : 64
clflush size : 64
clflush size : 64
clflush size : 64
clflush size : 64
2、安装erlang依赖的基本环境
[root@leekwen ~]# yum -y install make gcc gcc-c++ kernel-devel m4 ncurses-devel openssl-devel
3、导入erlang源，并安装erlang
[root@leekwen ~]# rpm --import http://binaries.erlang-solutions.com/debian/erlang_solutions.asc
[root@leekwen ~]# wget -O /etc/yum.repos.d/erlang_solutions.repo http://binaries.erlang-solutions.com/rpm/centos/erlang_solutions.repo
--2014-04-09 22:29:49-- http://binaries.erlang-solutions.com/rpm/centos/erlang_solutions.repo
Resolving binaries.erlang-solutions.com... 46.235.224.136
Connecting to binaries.erlang-solutions.com|46.235.224.136|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://packages.erlang-solutions.com//rpm/centos/erlang_solutions.repo [following]
--2014-04-09 22:29:56-- http://packages.erlang-solutions.com//rpm/centos/erlang_solutions.repo
Resolving packages.erlang-solutions.com... 31.172.186.53
Connecting to packages.erlang-solutions.com|31.172.186.53|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 245
Saving to: /etc/yum.repos.d/erlang_solutions.repo 100%[=================================================================================>] 245 --.-K/s in 0s 2014-04-09 22:30:09 (34.0 MB/s) - /etc/yum.repos.d/erlang_solutions.repo
[root@leekwen ~]# wget http://apt.sw.be/redhat/el6/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
Resolving tree.repoforge.org... 78.46.17.228
Connecting to tree.repoforge.org|78.46.17.228|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://apt.sw.be/redhat/el6/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm [following]
--2014-04-09 22:30:54-- http://apt.sw.be/redhat/el6/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
Resolving apt.sw.be... 193.1.193.67
Connecting to apt.sw.be|193.1.193.67|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 12700 (12K) [application/x-redhat-package-manager]
Saving to: rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm 100%[=================================================================================>] 12,700 4.80K/s in 2.6s 2014-04-09 22:31:07 (4.80 KB/s) - rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm [root@leekwen ~]# rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
[root@leekwen ~]# rpm -i rpmforge-release-0.5.2-2.el6.rf.*.rpm
[root@leekwen ~]# yum update
[root@leekwen ~]# yum update --skip-broken
[root@leekwen ~]# yum install erlang
4、测试erlang环境
[root@leekwen ~]# erl
Erlang R16B03 (erts-5.10.4) [source] [64-bit] [smp:8:8] [async-threads:10] [kernel-poll:false] Eshell V5.10.4 (abort with ^G)
1> A=12.
12
2> A.
12
3>
BREAK: (a)bort (c)ontinue (p)roc info (i)nfo (l)oaded
(v)ersion (k)ill (D)b-tables (d)istribution
^C[root@leekwen ~]#
5、下载并安装rabbitmq-server
[root@leekwen ~]# wget -c http://www.rabbitmq.com/releases/rabbitmq-server/v3.3.0/rabbitmq-server-3.3.0-1.noarch.rpm
--2014-04-10 16:44:24--
http://www.rabbitmq.com/releases/rabbitmq-server/v3.3.0/rabbitmq-server-3.3.0-1.noarch.rpm
Resolving www.rabbitmq.com... 192.240.153.117
Connecting to www.rabbitmq.com|192.240.153.117|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3869384 (3.7M) [application/x-redhat-package-manager]
Saving to: “rabbitmq-server-3.3.0-1.noarch.rpm” 100%[======================================>] 3,869,384 11.9K/s in 5m 37s 2014-04-10 16:50:10 (11.2 KB/s) - “rabbitmq-server-3.3.0-1.noarch.rpm” saved [3869384/3869384] [root@leekwen ~]# yum install rabbitmq-server-3.3.0-1.noarch.rpm
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
* base: centos.ustc.edu.cn
* extras: centos.ustc.edu.cn
* rpmforge: ftp.riken.jp
* updates: centos.ustc.edu.cn
Setting up Install Process
Examining rabbitmq-server-3.3.0-1.noarch.rpm: rabbitmq-server-3.3.0-1.noarch
Marking rabbitmq-server-3.3.0-1.noarch.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package rabbitmq-server.noarch 0:3.3.0-1 will be installed
--> Finished Dependency Resolution Dependencies Resolved ================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
rabbitmq-server noarch 3.3.0-1 /rabbitmq-server-3.3.0-1.noarch 4.3 M Transaction Summary
================================================================================
Install 1 Package(s) Total size: 4.3 M
Installed size: 4.3 M
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : rabbitmq-server-3.3.0-1.noarch 1/1 Installed:
rabbitmq-server.noarch 0:3.3.0-1 Complete!
6、启动rabbitmq-server
[root@leekwen ~]# /etc/init.d/rabbitmq-server start
Starting rabbitmq-server:
FAILED - check /var/log/rabbitmq/startup_{log, _err}
rabbitmq-server.
[root@leekwen ~]# cat /var/log/rabbitmq/startup_err
[root@leekwen ~]# cat /var/log/rabbitmq/startup_log
ERROR: epmd error for host leekwen: address (cannot connect to host/port)
[root@leekwen ~]# hostname
leekwen
[root@leekwen ~]# vi /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=leekwen
[root@leekwen ~]# cat /etc/hosts
127.0.0.1 localhost
127.0.0.1 leekwen
::1 localhost
7、以上操作排除了因为主机名不同导致RabbitMQ-Server启动报错的问题，请修改主机名（参见上述步骤），再次启动RabbitMQ-Server
[root@leekwen ~]# /etc/init.d/rabbitmq-server restart
Restarting rabbitmq-server: RabbitMQ is not running
FAILED - check /var/log/rabbitmq/startup_{log, _err}
rabbitmq-server.
8、结果同样报错，查看错误的日志：
[root@leekwen ~]# cat /var/log/rabbitmq/startup_log
RabbitMQ 3.3.0. Copyright (C) 2007-2013 GoPivotal, Inc.
## ## Licensed under the MPL. See http://www.rabbitmq.com/
## ##
########## Logs: /var/log/rabbitmq/rabbit@leekwen.log
###### ## /var/log/rabbitmq/rabbit@leekwen-sasl.log
##########
Starting broker... BOOT FAILED
=========== Error description:
{case_clause,
{error,
{{shutdown,
{failed_to_start_child,tcp_listener,
{cannot_listen,{0,0,0,0,0,0,0,0},5672,eaddrinuse}}},
{child,undefined,'rabbit_tcp_listener_sup_:::5672',
{tcp_listener_sup,start_link,
[{0,0,0,0,0,0,0,0},
5672,
[inet6,binary,
{packet,raw},
{reuseaddr,true},
{backlog,128},
{nodelay,true},
{linger,{true,0}},
{exit_on_close,false}],
{rabbit_networking,tcp_listener_started,[amqp]},
{rabbit_networking,tcp_listener_stopped,[amqp]},
{rabbit_networking,start_client,[]},
"TCP Listener"]},
transient,infinity,supervisor,
[tcp_listener_sup]}}}} Log files (may contain more information):
/var/log/rabbitmq/rabbit@leekwen.log
/var/log/rabbitmq/rabbit@leekwen-sasl.log Stack trace:
[{rabbit_networking,start_listener0,4,[]},
{rabbit_networking,'-start_listener/4-lc$^0/1-0-',4,[]},
{rabbit_networking,start_listener,4,[]},
{rabbit_networking,'-boot_tcp/0-lc$^0/1-0-',1,[]},
{rabbit_networking,boot_tcp,0,[]},
{rabbit_networking,boot,0,[]},
{rabbit,'-run_boot_step/1-lc$^1/1-1-',1,[]},
{rabbit,run_boot_step,1,[]}] BOOT FAILED
=========== Error description:
{could_not_start,rabbit,
{bad_return,
{{rabbit,start,[normal,[]]},
{'EXIT',
{rabbit,failure_during_boot,
{case_clause,
{error,
{{shutdown,
{failed_to_start_child,tcp_listener,
{cannot_listen,{0,0,0,0,0,0,0,0},5672,eaddrinuse}}},
{child,undefined,'rabbit_tcp_listener_sup_:::5672',
{tcp_listener_sup,start_link,
[{0,0,0,0,0,0,0,0},
5672,
[inet6,binary,
{packet,raw},
{reuseaddr,true},
{backlog,128},
{nodelay,true},
{linger,{true,0}},
{exit_on_close,false}],
{rabbit_networking,tcp_listener_started,[amqp]},
{rabbit_networking,tcp_listener_stopped,[amqp]},
{rabbit_networking,start_client,[]},
"TCP Listener"]},
transient,infinity,supervisor,
[tcp_listener_sup]}}}}}}}}} Log files (may contain more information):
/var/log/rabbitmq/rabbit@leekwen.log
/var/log/rabbitmq/rabbit@leekwen-sasl.log {"init terminating in do_boot",{rabbit,failure_during_boot,{could_not_start,rabb use,{error,{{shutdown,{failed_to_start_child,tcp_listener,{cannot_listen,{0,0,0, stener_sup,start_link,[{0,0,0,0,0,0,0,0},5672,[inet6,binary,{packet,raw},{reusea networking,tcp_listener_started,[amqp]},{rabbit_networking,tcp_listener_stopped, or,[tcp_listener_sup]}}}}}}}}}}}
tail: /var/log/rabbitmq/startup_log: file truncated [FAILED] [root@leekwen ~]# cat /var/log/rabbitmq/startup_err Crash dump was written to: erl_crash.dump
init terminating in do_boot ()
9、出现如上的错误，可能是因为5672端口已经被占用的原因。 查看5672端口的情况，如果有进程占用此端口，请将它关闭后，重新启动RabbitMQ-Server；
[root@leekwen ~]# netstat -atn |grep 5672
tcp 0 0 0.0.0.0:5672 0.0.0.0:* LISTEN
[root@leekwen ~]# lsof -i:5672
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
qpidd 1901 qpidd 10u IPv4 13941 0t0 TCP *:amqp (LISTEN)
[root@leekwen ~]# chkconfig qpidd off
[root@leekwen ~]# netstat -atn |grep 5672
tcp 0 0 0.0.0.0:5672 0.0.0.0:* LISTEN
[root@leekwen ~]# chkconfig qpidd --list
qpidd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
[root@leekwen ~]# /etc/init.d/qpidd stop
Stopping Qpid AMQP daemon: [ OK ]
[root@leekwen ~]# netstat -atn |grep 5672
tcp 0 0 127.0.0.1:25672 127.0.0.1:60925 TIME_WAIT
[root@leekwen ~]# lsof -i:5672
[root@leekwen ~]# /etc/init.d/rabbitmq-server start
Starting rabbitmq-server: SUCCESS
rabbitmq-server.
10、查看RabbitMQ服务启动的状态，并开启RabbitMQ的相应管理插件：
[root@leekwen ~]# rabbitmqctl status
Status of node rabbit@leekwen ...
[{pid,716},
{running_applications,[{rabbit,"RabbitMQ","3.3.0"},
{os_mon,"CPO CXC 138 46","2.2.14"},
{mnesia,"MNESIA CXC 138 12","4.11"},
{xmerl,"XML parser","1.3.5"},
{sasl,"SASL CXC 138 11","2.3.4"},
{stdlib,"ERTS CXC 138 10","1.19.4"},
{kernel,"ERTS CXC 138 10","2.16.4"}]},
{os,{unix,linux}},
{erlang_version,"Erlang R16B03 (erts-5.10.4) [source] [64-bit] [smp:8:8] [async-threads:30] [kernel-poll:true]\n"},
{memory,[{total,36436456},
{connection_procs,2704},
{queue_procs,5408},
{plugins,0},
{other_proc,13704576},
{mnesia,60240},
{mgmt_db,0},
{msg_index,24368},
{other_ets,789624},
{binary,13672},
{code,16399491},
{atom,594537},
{other_system,4841836}]},
{alarms,[]},
{listeners,[{clustering,25672,"::"},{amqp,5672,"::"}]},
{vm_memory_high_watermark,0.4},
{vm_memory_limit,6690450636},
{disk_free_limit,50000000},
{disk_free,47402364928},
{file_descriptors,[{total_limit,924},
{total_used,3},
{sockets_limit,829},
{sockets_used,1}]},
{processes,[{limit,1048576},{used,131}]},
{run_queue,0},
{uptime,83}]
...done. [root@leekwen ~]# netstat -atn |grep 5672
tcp 0 0 0.0.0.0:25672 0.0.0.0:* LISTEN
tcp 0 0 :::5672 :::* LISTEN
[root@leekwen ~]# lsof -i:5672
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
beam.smp 716 rabbitmq 15u IPv6 1948888 0t0 TCP *:amqp (LISTEN)
[root@leekwen ~]# rabbitmq-plugins list
[ ] amqp_client 3.3.0
[ ] cowboy 0.5.0-rmq3.3.0-git4b93c2d
[ ] eldap 3.3.0-gite309de4
[ ] mochiweb 2.7.0-rmq3.3.0-git680dba8
[ ] rabbitmq_amqp1_0 3.3.0
[ ] rabbitmq_auth_backend_ldap 3.3.0
[ ] rabbitmq_auth_mechanism_ssl 3.3.0
[ ] rabbitmq_consistent_hash_exchange 3.3.0
[ ] rabbitmq_federation 3.3.0
[ ] rabbitmq_federation_management 3.3.0
[ ] rabbitmq_management 3.3.0
[ ] rabbitmq_management_agent 3.3.0
[ ] rabbitmq_management_visualiser 3.3.0
[ ] rabbitmq_mqtt 3.3.0
[ ] rabbitmq_shovel 3.3.0
[ ] rabbitmq_shovel_management 3.3.0
[ ] rabbitmq_stomp 3.3.0
[ ] rabbitmq_tracing 3.3.0
[ ] rabbitmq_web_dispatch 3.3.0
[ ] rabbitmq_web_stomp 3.3.0
[ ] rabbitmq_web_stomp_examples 3.3.0
[ ] sockjs 0.3.4-rmq3.3.0-git3132eb9
[ ] webmachine 1.10.3-rmq3.3.0-gite9359c7
[root@leekwen ~]# rabbitmq-plugins enable rabbitmq_management
The following plugins have been enabled:
mochiweb
webmachine
rabbitmq_web_dispatch
amqp_client
rabbitmq_management_agent
rabbitmq_management
Plugin configuration has changed. Restart RabbitMQ for changes to take effect.
[root@leekwen ~]# rabbitmq-plugins enable mochiweb webmachine rabbitmq_web_dispatch amqp_client rabbitmq_m anagement_agent rabbitmq_management
Plugin configuration unchanged.
[root@leekwen ~]# rabbitmq-plugins list
[E] amqp_client 3.3.0
[ ] cowboy 0.5.0-rmq3.3.0-git4b93c2d
[ ] eldap 3.3.0-gite309de4
[E] mochiweb 2.7.0-rmq3.3.0-git680dba8
[ ] rabbitmq_amqp1_0 3.3.0
[ ] rabbitmq_auth_backend_ldap 3.3.0
[ ] rabbitmq_auth_mechanism_ssl 3.3.0
[ ] rabbitmq_consistent_hash_exchange 3.3.0
[ ] rabbitmq_federation 3.3.0
[ ] rabbitmq_federation_management 3.3.0
[E] rabbitmq_management 3.3.0
[E] rabbitmq_management_agent 3.3.0
[ ] rabbitmq_management_visualiser 3.3.0
[ ] rabbitmq_mqtt 3.3.0
[ ] rabbitmq_shovel 3.3.0
[ ] rabbitmq_shovel_management 3.3.0
[ ] rabbitmq_stomp 3.3.0
[ ] rabbitmq_tracing 3.3.0
[E] rabbitmq_web_dispatch 3.3.0
[ ] rabbitmq_web_stomp 3.3.0
[ ] rabbitmq_web_stomp_examples 3.3.0
[ ] sockjs 0.3.4-rmq3.3.0-git3132eb9
[E] webmachine 1.10.3-rmq3.3.0-gite9359c7
[root@leekwen ~]# rabbitmq-plugins list
[E] amqp_client 3.3.0
[ ] cowboy 0.5.0-rmq3.3.0-git4b93c2d
[ ] eldap 3.3.0-gite309de4
[E] mochiweb 2.7.0-rmq3.3.0-git680dba8
[ ] rabbitmq_amqp1_0 3.3.0
[ ] rabbitmq_auth_backend_ldap 3.3.0
[ ] rabbitmq_auth_mechanism_ssl 3.3.0
[ ] rabbitmq_consistent_hash_exchange 3.3.0
[ ] rabbitmq_federation 3.3.0
[ ] rabbitmq_federation_management 3.3.0
[E] rabbitmq_management 3.3.0
[E] rabbitmq_management_agent 3.3.0
[ ] rabbitmq_management_visualiser 3.3.0
[ ] rabbitmq_mqtt 3.3.0
[ ] rabbitmq_shovel 3.3.0
[ ] rabbitmq_shovel_management 3.3.0
[ ] rabbitmq_stomp 3.3.0
[ ] rabbitmq_tracing 3.3.0
[E] rabbitmq_web_dispatch 3.3.0
[ ] rabbitmq_web_stomp 3.3.0
[ ] rabbitmq_web_stomp_examples 3.3.0
[ ] sockjs 0.3.4-rmq3.3.0-git3132eb9
[E] webmachine 1.10.3-rmq3.3.0-gite9359c7
[root@leekwen ~]# netstat -atn |grep 5672
tcp 0 0 0.0.0.0:25672 0.0.0.0:* LISTEN
tcp 0 0 :::5672 :::* LISTEN
[root@leekwen ~]# netstat -atn |grep 15672
[root@leekwen ~]# netstat -atn |grep 55672
[root@leekwen ~]# /etc/init.d/rabbitmq-server restart
Restarting rabbitmq-server: SUCCESS
rabbitmq-server.
[root@leekwen ~]# netstat -atn |grep 55672
[root@leekwen ~]# netstat -atn |grep 5672
tcp 0 0 0.0.0.0:15672 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:25672 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:54463 127.0.0.1:25672 TIME_WAIT
tcp 0 0 127.0.0.1:60321 127.0.0.1:25672 TIME_WAIT
tcp 0 0 127.0.0.1:25672 127.0.0.1:56750 TIME_WAIT
tcp 0 0 :::5672 :::* LISTEN 就可以用guest,guest登陆http://192.168.1.101:15672端口了。
注意：如果此时你从端口15672或55672登陆不了，请关闭CentOS6.2的防火墙，再次登陆,
如果仍然出现无法登陆的想象，查看日志后，显示：
=ERROR REPORT==== 20-Apr-2014::00:55:15 ===
webmachine error: path="api/whoami"
"Unauthorized"
那么请运行如下的命令，增加用户admin，密码admin即可。
[root@leekwen ~]# rabbitmqctl add_user admin admin
Creating user "admin" ...
...done.
[root@leekwen ~]# rabbitmqctl list_users
Listing users ...
admin []
guest [administrator]
...done.
[root@leekwen ~]# rabbitmqctl set_user_tags admin administrator
Setting tags for user "admin" to [administrator] ...
...done.
[root@leekwen ~]# rabbitmqctl list_users
Listing users ...
admin [administrator]
guest [administrator]
...done.